Mega-scale fabrication by Contour Crafting

Automated construction by contour crafting—related robotics and information technologies

Khoshnevis, B. (2003) · Automation in Construction · doi:10.1016/j.autcon.2003.08.012 · Cited by 1,169 · see citing works

Matching, Euler tours and the Chinese postman

Edmonds, J., & Johnson, E. L. (1973) · Mathematical Programming · doi:10.1007/bf01580113 · Cited by 978 · see citing works

Innovative rapid prototyping process makes large sized, smooth surfaced complex shapes in a wide variety of materials

Khoshnevis, B., & Dutton, R. (1998) · Materials Technology · doi:10.1080/10667857.1998.11752766 · Cited by 207 · cited 1× · see citing works

NC machining of arbitrarily shaped pockets

Persson, H. (1978) · Computer-Aided Design · doi:10.1016/0010-4485(78)90141-0 · Cited by 184 · see citing works

Tool-path planning for direction-parallel area milling

Park, S. C., & Choi, B. K. (2000) · Computer-Aided Design · doi:10.1016/s0010-4485(99)00080-9 · Cited by 183 · see citing works

Lunar Contour Crafting - A Novel Technique for ISRU-Based Habitat Development

Khoshnevis, B., Bodiford, M., Burks, K., Ethridge, E., Tucker, D., Kim, W., Toutanji, H., & Fiske, M. (2005) · 43rd AIAA Aerospace Sciences Meeting and Exhibit · doi:10.2514/6.2005-538 · Cited by 138 · see citing works

Tool-path generation for Z -constant contour machining

Park, S. C. (2002) · Computer-Aided Design · doi:10.1016/s0010-4485(01)00173-7 · Cited by 52 · see citing works

Construction Automation: Demands and Satisfiers in the United States and Japan

Everett, J. G., & Saito, H. (1996) · Journal of Construction Engineering and Management · doi:10.1061/(asce)0733-9364(1996)122:2(147 · Cited by 19 · see citing works

Intelligent automated grid generation for numerical simulations

Yao, K.-T., & Gelsey, A. (1996) · Artificial intelligence for engineering design analysis and manufacturing · doi:10.1017/s0890060400001566 · Cited by 4 · see citing works

The status, challenges, and future of additive manufacturing in engineering

Gao, W., Zhang, Y., Ramanujan, D., Karthik Ramani, A., Chen, Y., Williams, C. B., Wang, C. C. L., Shin, Y. C., Zhang, S., & Zavattieri, P. D. (2015) · Computer-Aided Design · doi:10.1016/j.cad.2015.04.001 · Cited by 2,638 · see citing works

Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints

Thompson, M. K., Moroni, G., Vaneker, T., Fadel, G., Campbell, R. I., Gibson, I., Bernard, A., Schulz, J., Graf, P., Ahuja, B., et al. (2016) · CIRP Annals · doi:10.1016/j.cirp.2016.05.004 · Cited by 2,025 · see citing works

3D printing using concrete extrusion: A roadmap for research

Buswell, R. A., da Silva, W. R. L., Jones, S. Z., & Dirrenberger, J. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.05.006 · Cited by 1,631 · see citing works

Additive manufacturing of concrete in construction: potentials and challenges of 3D concrete printing

Bos, F., Wolfs, R., Ahmed, Z., & Salet, T. (2016) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1209867 · Cited by 1,257 · see citing works

Developments in construction-scale additive manufacturing processes

Lim, S., Buswell, R. A., Le, T. T., Austin, S. A., Gibb, A. G. F., & Thorpe, T. (2012) · Automation in Construction · doi:10.1016/j.autcon.2011.06.010 · Cited by 1,205 · see citing works

Hardened properties of high-performance printing concrete

Le, T. T., Austin, S. A., Lim, S., Buswell, R. A., Law, R., Gibb, A., & Thorpe, T. (2012) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.12.003 · Cited by 1,026 · see citing works

Structural built-up of cement-based materials used for 3D-printing extrusion techniques

Perrot, A., Rangeard, D., & Pierre, A. (2015) · Materials and Structures · doi:10.1617/s11527-015-0571-0 · Cited by 967 · see citing works

3D printing trends in building and construction industry: a review

Tay, Y. W. D., Panda, B., Paul, S. C., Mohamed, N. A. N., Tan, M. J., & Leong, K. F. (2017) · Virtual and Physical Prototyping · doi:10.1080/17452759.2017.1326724 · Cited by 871 · see citing works

Early age mechanical behaviour of 3D printed concrete: Numerical modelling and experimental testing

Wolfs, R. J. M., Bos, F. P., & Salet, T. A. M. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.02.001 · Cited by 856 · see citing works

Additive manufacturing in construction: A review on processes, applications, and digital planning methods

Paolini, A., Kollmannsberger, S., & Rank, E. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.100894 · Cited by 678 · see citing works

Digital Concrete: Opportunities and Challenges

Wangler, T. P., Lloret‐Fritschi, E., Reiter, L., Hack, N., Gramazio, F., Köhler, M., Bernhard, M., Dillenburger, B., Buchli, J., Roussel, N., et al. (2016) · RILEM Technical Letters · doi:10.21809/rilemtechlett.2016.16 · Cited by 643 · see citing works

Digital Concrete: A Review

Wangler, T. P., Roussel, N., Bos, F. P., Salet, T. A. M., & Flatt, R. J. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.105780 · Cited by 624 · see citing works

Applications of additive manufacturing in the construction industry – A forward-looking review

Camacho, D. D., Clayton, P. M., O’Brien, W. J., Seepersad, C. C., Juenger, M. C. G., Ferron, R. D., & Salamone, S. (2018) · Automation in Construction · doi:10.1016/j.autcon.2017.12.031 · Cited by 542 · see citing works

Large-scale 3D printing concrete technology: Current status and future opportunities

Xiao, J., Ji, G., Zhang, Y., Ma, G., Mechtcherine, V., Pan, J., Li, W., Ding, T., Duan, Z., & Du, S. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2021.104115 · Cited by 534 · see citing works

Additive manufacturing of geopolymer for sustainable built environment

Panda, B., Paul, S. C., Hui, L. J., Tay, Y. W. D., & Tan, M. J. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.08.165 · Cited by 517 · see citing works

Design of a 3D printed concrete bridge by testing

Salet, T. A. M., Ahmed, Z., Bos, F. P., & Laagland, H. L. M. (2018) · Virtual and Physical Prototyping · doi:10.1080/17452759.2018.1476064 · Cited by 507 · see citing works

3D printable concrete: Mixture design and test methods

Rahul, A. V., Santhanam, M., Meena, H., & Ghani, Z. (2018) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.12.014 · Cited by 484 · see citing works

A review of 3D concrete printing systems and materials properties: current status and future research prospects

Paul, S. C., van Zijl, G. P. A. G., Tan, M. J., & Gibson, I. (2018) · Rapid Prototyping Journal · doi:10.1108/rpj-09-2016-0154 · Cited by 424 · see citing works

Large-scale 3D printing by a team of mobile robots

Zhang, X., Li, M., Lim, J. H., Weng, Y., Tay, Y. W. D., Pham, H., & Pham, Q. (2018) · Automation in Construction · doi:10.1016/j.autcon.2018.08.004 · Cited by 420 · see citing works

Extrusion-based concrete 3D printing from a material perspective: A state-of-the-art review

Mohan, M. K., Rahul, A. V., Schutter, G. D., & Tittelboom, K. V. (2020) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2020.103855 · Cited by 388 · see citing works

Rethinking reinforcement for digital fabrication with concrete

Asprone, D., Menna, C., Bos, F. P., Salet, T. A. M., Mata‐Falcón, J., & Kaufmann, W. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.05.020 · Cited by 387 · see citing works

A critical review of 3D printing in construction: benefits, challenges, and risks

El-Sayegh, S. M., Romdhane, L., & Manjikian, S. (2020) · Archives of Civil and Mechanical Engineering · doi:10.1007/s43452-020-00038-w · Cited by 387 · see citing works

Mechanical properties of structures 3D printed with cementitious powders

Feng, P., Meng, X., Chen, J. F., & Ye, L. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.05.132 · Cited by 370 · see citing works

Method of formulating geopolymer for 3D printing for construction applications

Xia, M., & Sanjayan, J. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.07.136 · Cited by 360 · see citing works

Additive manufacturing technology and its implementation in construction as an eco-innovative solution

Ghaffar, S. H., Corker, J., & Fan, M. (2018) · Automation in Construction · doi:10.1016/j.autcon.2018.05.005 · Cited by 363 · see citing works

Effects of interlocking on interlayer adhesion and strength of structures in 3D printing of concrete

Zareiyan, B., & Khoshnevis, B. (2017) · Automation in Construction · doi:10.1016/j.autcon.2017.08.019 · Cited by 357 · see citing works

Mesh reinforcing method for 3D Concrete Printing

Marchment, T., & Sanjayan, J. (2019) · Automation in Construction · doi:10.1016/j.autcon.2019.102992 · Cited by 351 · see citing works

3D-printed steel reinforcement for digital concrete construction – Manufacture, mechanical properties and bond behaviour

Mechtcherine, V., Grafe, J., Nerella, V. N., Spaniol, E., Hertel, M., & Füssel, U. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.05.202 · Cited by 333 · see citing works

Extrusion-based additive manufacturing technologies: State of the art and future perspectives

Altıparmak, S. C., Yardley, V. A., Shi, Z., & Lin, J. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.09.032 · Cited by 320 · see citing works

3D printing of earth-based materials: Processing aspects

Perrot, A., Rangeard, D., & Courteille, E. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.04.017 · Cited by 314 · see citing works

Design 3D printing cementitious materials via Fuller Thompson theory and Marson-Percy model

Weng, Y., Li, M., Tan, M. J., & Qian, S. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.12.112 · Cited by 304 · see citing works

Steel fibres reinforced 3D printed concrete: Influence of fibre sizes on mechanical performance

Pham, L. T. C., Tran, P., & Sanjayan, J. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.118785 · Cited by 302 · see citing works

Online Real-Time Quality Monitoring in Additive Manufacturing Processes Using Heterogeneous Sensors

Rao, P., Liu, J. P., Roberson, D. G., Kong, Z., & Williams, C. B. (2015) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4029823 · Cited by 293 · see citing works

Interlayer adhesion and strength of structures in Contour Crafting - Effects of aggregate size, extrusion rate, and layer thickness

Zareiyan, B., & Khoshnevis, B. (2017) · Automation in Construction · doi:10.1016/j.autcon.2017.06.013 · Cited by 289 · see citing works

A systematical review of 3D printable cementitious materials

Lu, B. H., Weng, Y., Li, M., Qian, Y., Leong, K. F., Tan, M. J., & Qian, S. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.02.144 · Cited by 289 · see citing works

Cements in the 21 st century: Challenges, perspectives, and opportunities

Biernacki, J. J., Bullard, J. W., Sant, G., Brown, K. G., Glasser, F. P., Jones, S. Z., Ley, T., Livingston, R. A., Nicoleau, L., Olek, J., et al. (2017) · Journal of the American Ceramic Society · doi:10.1111/jace.14948 · Cited by 285 · see citing works

Technology readiness: A global snapshot of 3D concrete printing and the frontiers for development

Ma, G., Buswell, R. A., da Silva, W. R. L., Li, W., Xu, J., & Jones, S. Z. (2022) · Cement and Concrete Research · doi:10.1016/j.cemconres.2022.106774 · Cited by 283 · see citing works

Method of enhancing interlayer bond strength in construction scale 3D printing with mortar by effective bond area amplification

Marchment, T., Sanjayan, J., & Xia, M. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107684 · Cited by 282 · see citing works

Experimental Exploration of Metal Cable as Reinforcement in 3D Printed Concrete

Bos, F. P., Ahmed, Z., Jutinov, E., & Salet, T. A. M. (2017) · Materials · doi:10.3390/ma10111314 · Cited by 278 · see citing works

3D printed concrete for large-scale buildings: An overview of rheology, printing parameters, chemical admixtures, reinforcements, and economic and environmental prospects

Souza, M. T., Ferreira, I. M., de Moraes, E. G., Senff, L., & de Oliveira, A. P. N. (2020) · Journal of Building Engineering · doi:10.1016/j.jobe.2020.101833 · Cited by 269 · see citing works

Effect of polyethylene fiber content on workability and mechanical-anisotropic properties of 3D printed ultra-high ductile concrete

Ye, J., Cui, C., Yu, J., Yu, K., & Dong, F. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.122586 · Cited by 263 · see citing works

State-of-the-art of 3D printing technology of cementitious material—An emerging technique for construction

Ma, G., Li, W., & Ju, Y. (2017) · Science China Technological Sciences · doi:10.1007/s11431-016-9077-7 · Cited by 262 · see citing works

Opportunities and challenges for structural engineering of digitally fabricated concrete

Menna, C., Mata‐Falcón, J., Bos, F. P., Vantyghem, G., Ferrara, L., Asprone, D., Salet, T. A. M., & Kaufmann, W. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106079 · Cited by 256 · see citing works

A process classification framework for defining and describing Digital Fabrication with Concrete

Buswell, R. A., da Silva, W. R. L., Bos, F. P., Schipper, H. R., Lowke, D., Hack, N., Kloft, H., Mechtcherine, V., Wangler, T. P., & Roussel, N. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106068 · Cited by 255 · see citing works

A critical review of preparation design and workability measurement of concrete material for largescale 3D printing

Ma, G., & Li, W. (2017) · Frontiers of Structural and Civil Engineering · doi:10.1007/s11709-017-0430-x · Cited by 254 · see citing works

Environmental assessment of large-scale 3D printing in construction: A comparative study between cob and concrete

Alhumayani, H., Gomaa, M., Soebarto, V. I., & Jabi, W. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.122463 · Cited by 252 · see citing works

Potential benefits of digital fabrication for complex structures: Environmental assessment of a robotically fabricated concrete wall

Agustí-Juan, I., Müller, F., Hack, N., Wangler, T. P., & Habert, G. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.04.002 · Cited by 247 · see citing works

Robotic technologies for on-site building construction: A systematic review

Gharbia, M., Chang-Richards, A. Y., Lu, Y., Zhong, R. Y., & Li, H. (2020) · Journal of Building Engineering · doi:10.1016/j.jobe.2020.101584 · Cited by 233 · see citing works

Fresh and anisotropic-mechanical properties of 3D printable ultra-high ductile concrete with crumb rubber

Ye, J., Cui, C., Yu, J., Yu, K., & Xiao, J. (2021) · Composites Part B Engineering · doi:10.1016/j.compositesb.2021.108639 · Cited by 229 · see citing works

A review of “3D concrete printing”: Materials and process characterization, economic considerations and environmental sustainability

Ahmed, G. H. (2023) · Journal of Building Engineering · doi:10.1016/j.jobe.2023.105863 · Cited by 228 · see citing works

Current Progress of 3D Concrete Printing Technologies

Nematollahi, B., Xia, M., & Sanjayan, J. (2017) · International Symposium on Automation and Robotics in Construction (ISARC) · doi:10.22260/isarc2017/0035 · Cited by 220 · see citing works

Elastic properties of 3D printed fibre-reinforced structures

Abadi, H. A., Thai, H., Paton-Cole, V., & Patel, V. I. (2018) · Composite Structures · doi:10.1016/j.compstruct.2018.03.051 · Cited by 209 · see citing works

Development of a Viable Concrete Printing Process

Lim, S., Buswell, R. A., Le, T., Wackrow, R., Austin, S. A., Gibb, A., & Thorpe, T. (2011) · International Symposium on Automation and Robotics in Construction (ISARC) · doi:10.22260/isarc2011/0124 · Cited by 208 · see citing works

Additive manufacturing of cementitious composites: Materials, methods, potentials, and challenges

Hamidi, F., & Aslani, F. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.05.140 · Cited by 192 · see citing works

Modelling curved-layered printing paths for fabricating large-scale construction components

Lim, S., Buswell, R. A., Valentine, P. J., Piker, D., Austin, S. A., & Kestelier, X. D. (2016) · Additive manufacturing · doi:10.1016/j.addma.2016.06.004 · Cited by 184 · see citing works

Discretely assembled mechanical metamaterials

Jenett, B., Cameron, C., Tourlomousis, F., Rubio, A. P., Ochalek, M., & Gershenfeld, N. (2020) · Science Advances · doi:10.1126/sciadv.abc9943 · Cited by 181 · see citing works

Mixture Design Approach to optimize the rheological properties of the material used in 3D cementitious material printing

Liu, Z., Li, M., Weng, Y., Wong, T. N., & Tan, M. J. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.11.252 · Cited by 180 · see citing works

A review of formwork systems for modern concrete construction

Li, W., Lin, X., Bao, D. W., & Min Xie, Y. (2022) · Structures · doi:10.1016/j.istruc.2022.01.089 · Cited by 180 · see citing works

3D printing geopolymers: A review

Zhong, H., & Zhang, M. (2022) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2022.104455 · Cited by 178 · see citing works

A Strategic Roadmap for the Manufacturing Industry to Implement Industry 4.0

Butt, J. (2020) · Designs · doi:10.3390/designs4020011 · Cited by 182 · see citing works

3D Concrete Printing Sustainability: A Comparative Life Cycle Assessment of Four Construction Method Scenarios

Mohammad, M., Masad, E. A., & Al‐Ghamdi, S. G. (2020) · Buildings · doi:10.3390/buildings10120245 · Cited by 176 · see citing works

A systematic review and analysis of the viability of 3D-printed construction in remote environments

Schuldt, S., Jagoda, J. A., Hoisington, A. J., & Delorit, J. D. (2021) · Automation in Construction · doi:10.1016/j.autcon.2021.103642 · Cited by 171 · see citing works

On sustainability and digital fabrication with concrete

Flatt, R. J., & Wangler, T. P. (2022) · Cement and Concrete Research · doi:10.1016/j.cemconres.2022.106837 · Cited by 160 · see citing works

The Effect of Accelerator Dosage on Fresh Concrete Properties and on Interlayer Strength in Shotcrete 3D Printing

Mai, I., Freund, N., & Lowke, D. (2020) · Materials · doi:10.3390/ma13020374 · Cited by 158 · see citing works

Fresh and Hardened Properties of Extrusion-Based 3D-Printed Cementitious Materials: A Review

Li, Z., Hojati, M., Wu, Z., Piasente, J., Ashrafi, N., Duarte, J. P., Nazarian, S., Bilén, S. G., Memari, A. M., & Radlińska, A. (2020) · Sustainability · doi:10.3390/su12145628 · Cited by 154 · see citing works

Empirical models to predict rheological properties of fiber reinforced cementitious composites for 3D printing

Weng, Y., Lu, B. H., Li, M., Liu, Z., Tan, M. J., & Qian, S. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.09.039 · Cited by 150 · see citing works

Functionally graded concrete: Design objectives, production techniques and analysis methods for layered and continuously graded elements

Torelli, G., Fernández, M. G., & Lees, J. M. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.118040 · Cited by 146 · see citing works

Recent advancements and future trends in 3D concrete printing using waste materials

Tu, H., Wei, Z., Bahrami, A., Kahla, N. B., Ahmad, A., & Özkılıç, Y. O. (2023) · Developments in the Built Environment · doi:10.1016/j.dibe.2023.100187 · Cited by 141 · see citing works

Correlation between destructive compression tests and non-destructive ultrasonic measurements on early age 3D printed concrete

Wolfs, R. J. M., Bos, F. P., & Salet, T. A. M. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.06.060 · Cited by 135 · see citing works

Extra-terrestrial construction processes – Advancements, opportunities and challenges

Lim, S., Prabhu, V. L., Anand, M., & Taylor, L. A. (2017) · Advances in Space Research · doi:10.1016/j.asr.2017.06.038 · Cited by 134 · see citing works

Underwater 3D printing of cement-based mortar

Mazhoud, B., Perrot, A., Picandet, V., Rangeard, D., & Courteille, E. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.04.134 · Cited by 134 · see citing works

A critical review of 3D printing and digital manufacturing in construction engineering

Ali, M. H., Issayev, G., Shehab, E., & Sarfraz, S. (2022) · Rapid Prototyping Journal · doi:10.1108/rpj-07-2021-0160 · Cited by 134 · see citing works

Development of extrudable high strength fiber reinforced concrete incorporating nano calcium carbonate

Chu, S. H., Li, L. G., & Kwan, A. K. H. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101617 · Cited by 131 · see citing works

Buildability and Mechanical Properties of 3D Printed Concrete

Joh, C., Lee, J., Bui, Q.-T., Park, J., & Yang, I.-H. (2020) · Materials · doi:10.3390/ma13214919 · Cited by 130 · see citing works

Interfacial bonding properties of 3D printed permanent formwork with the post-casted concrete

Li, W., Yu, Y., Liang, Y., & Ma, G. (2022) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2022.104457 · Cited by 129 · see citing works

Processing and Properties of Construction Materials for 3D Printing

Tay, Y. W. D., Panda, B., Paul, S. C., Tan, M. J., Qian, S., Leong, K. F., & Chua, C. K. (2016) · Materials science forum · doi:10.4028/www.scientific.net/msf.861.177 · Cited by 126 · see citing works

Large-Scale 3D Printing for Construction Application by Means of Robotic Arm and Gantry 3D Printer: A Review

Puzatova, A. V., Shakor, P., Laghi, V., & Dmitrieva, M. A. (2022) · Buildings · doi:10.3390/buildings12112023 · Cited by 126 · see citing works

Mechanical properties of 3D printed concrete in hot temperatures

Alchaar, A. S., & Al-Tamimi, A. K. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.120991 · Cited by 124 · see citing works

Effect of supplementary cementitious materials on properties of 3D printed conventional and alkali-activated concrete: A review

Nodehi, M., Ozbakkaloglu, T., & Gholampour, A. (2022) · Automation in Construction · doi:10.1016/j.autcon.2022.104215 · Cited by 120 · see citing works

3D printing for remote housing: Benefits and challenges

Bazli, M., Ashrafi, H., Rajabipour, A., & Kutay, C. (2023) · Automation in Construction · doi:10.1016/j.autcon.2023.104772 · Cited by 119 · see citing works

From Smart Dynamic Casting to a growing family of Digital Casting Systems

Lloret‐Fritschi, E., Wangler, T. P., Gebhard, L., Mata‐Falcón, J., Mantellato, S., Scotto, F., Burger, J., Szabó, A., Ruffray, N., Reiter, L., et al. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106071 · Cited by 118 · see citing works

Rheology and shrinkage of concrete using polypropylene fiber for 3D concrete printing

Tran, M. V., Cu, Y. T. H., & Le, C. V. H. (2021) · Journal of Building Engineering · doi:10.1016/j.jobe.2021.103400 · Cited by 118 · see citing works

Overview of the Development of 3D-Printing Concrete: A Review

Lyu, F., Zhao, D., Hou, X., Sun, L. N., & Zhang, Q. (2021) · Applied Sciences · doi:10.3390/app11219822 · Cited by 117 · see citing works

Improving surface finish quality in extrusion-based 3D concrete printing using machine learning-based extrudate geometry control

Lao, W., Li, M., Wong, T. N., Tan, M. J., & Tjahjowidodo, T. (2020) · Virtual and Physical Prototyping · doi:10.1080/17452759.2020.1713580 · Cited by 115 · see citing works

Robotic 3D clay printing of prefabricated non-conventional wall components based on a parametric-integrated design

Kontovourkis, O., & Tryfonos, G. (2019) · Automation in Construction · doi:10.1016/j.autcon.2019.103005 · Cited by 113 · see citing works

Extrusion-Based Additive Manufacturing of Concrete Products: Revolutionizing and Remodeling the Construction Industry

Valente, M., Sibai, A., & Sambucci, M. (2019) · Journal of Composites Science · doi:10.3390/jcs3030088 · Cited by 112 · see citing works

Effect of Curing Methods on Shrinkage Development in 3D-Printed Concrete

Federowicz, K. K., Kaszyńska, M., Zieliński, A., & Hoffmann, M. (2020) · Materials · doi:10.3390/ma13112590 · Cited by 111 · see citing works

The relationship between the rheological behavior and interlayer bonding properties of 3D printing cementitious materials with the addition of attapulgite

Yao, H., Xie, Z., Li, Z., Huang, C., Yuan, Q., & Zheng, X. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.125809 · Cited by 98 · see citing works

A comparative study on environmental performance of 3D printing and conventional casting of concrete products with industrial wastes

Liu, S., Lu, B. H., Li, H., Pan, Z., Jiang, J., & Qian, S. (2022) · Chemosphere · doi:10.1016/j.chemosphere.2022.134310 · Cited by 98 · see citing works

A review of largescale 3DCP: Material characteristics, mix design, printing process, and reinforcement strategies

Ahmed, G. H., Askandar, N. H., & Jumaa, G. B. (2022) · Structures · doi:10.1016/j.istruc.2022.06.068 · Cited by 98 · see citing works

Strength-based topology optimization for anisotropic parts

Mirzendehdel, A. M., Rankouhi, B., & Suresh, K. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.11.007 · Cited by 97 · see citing works

Design, data and process issues for mega-scale rapid manufacturing machines used for construction

Buswell, R. A., Thorpe, A., Soar, R. C., & Gibb, A. (2008) · Automation in Construction · doi:10.1016/j.autcon.2008.03.001 · Cited by 97 · see citing works

Study on concrete pumpability combining different laboratory tools and linkage to rheology

Secrieru, E., Fataei, S., Schröfl, C., & Mechtcherine, V. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.03.199 · Cited by 96 · see citing works

Printing-while-moving: a new paradigm for large-scale robotic 3D Printing

Tiryaki, M. E., Zhang, X., & Pham, Q. (2019) · IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) · doi:10.1109/iros40897.2019.8967524 · Cited by 96 · see citing works

Building in Concrete with an Ultra-lightweight Knitted Stay-in-place Formwork: Prototype of a Concrete Shell Bridge

Popescu, M., Reiter, L., Liew, A., Mele, T. V., Flatt, R. J., & Block, P. (2018) · Structures · doi:10.1016/j.istruc.2018.03.001 · Cited by 92 · see citing works

Rheometry for Concrete 3D Printing: A Review and an Experimental Comparison

Jayathilakage, R., Rajeev, P., & Sanjayan, J. (2022) · Buildings · doi:10.3390/buildings12081190 · Cited by 92 · see citing works

3D Concrete Printing

Malaeb, Z., Alsakka, F., & Hamzeh, F. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-815481-6.00006-3 · Cited by 89 · see citing works

Examining layer height effects on the flexural and fracture response of plain and fiber-reinforced 3D-printed beams

Nair, S. A. O., Tripathi, A., & Neithalath, N. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2021.104254 · Cited by 87 · see citing works

Shotcrete 3D Printing Technology for the Fabrication of Slender Fully Reinforced Freeform Concrete Elements with High Surface Quality: A Real-Scale Demonstrator

Hack, N., & Kloft, H. (2020) · Rilem bookseries · doi:10.1007/978-3-030-49916-7_107 · Cited by 83 · see citing works

Variable-geometry nozzle for surface quality enhancement in 3D concrete printing

Lao, W., Li, M., & Tjahjowidodo, T. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101638 · Cited by 82 · see citing works

Contour Crafting

Khoshnevis, B., & Hwang, D. (2006) · Kluwer Academic Publishers eBooks · doi:10.1007/0-387-23291-5_9 · Cited by 14 · see citing works

A Impressora 3D que Constrói Casas

Ipê, N. (2015)

3D Free Form Fabrication Using the Pivoting Side Trowel with Ceramic Material

Kwon, H. K., & Jang, M.-K. (2010) · Materials science forum · doi:10.4028/www.scientific.net/msf.658.268 · Cited by 2 · see citing works

Automated Construction using Contour Crafting

Khoshnevis, B., Kwon, H.-K., & Bukkapatnam, S. (2001) · doi:10.26153/tsw/3344 · Cited by 11 · see citing works

Automated Costruction by Contour Crafting

Sharma, P. (2015) · Journal of Advance Research in Mechanical & Civil Engineering · doi:10.53555/nnmce.v2i6.326 · Cited by 1 · see citing works