Ultra-thin metal composites for electromagnetic interference shielding
Open accessThe DOI matches its Crossref record; 116 of the 116 references it cites were found in a registry or an index.
Abstract
Electromagnetic (EM) radiation pollution is increasing attention due to the popularization of electronic equipment. In recent years, various nanomaterials have been widely designed and developed for the enhancement of their EM interference shielding effectiveness (EMI SE). However, large amounts of reported reviews focus on carbon materials and transition metal carbides (e.g., MXenes), while the applications of metal nanocomposites in EM interference shielding are still suffering from the insufficient systematic analysis. Therefore, this paper provides comprehensive information on material selection, whole structural design, engineering preparation schemes and the latest cutting-edge techniques to elaborate the metal nanocomposites (thickness ≤1 mm) for EMI SE. We firstly describe the principle of EMI SE and structure design. Then we also investigate the material selection based on metals such as silver, copper, nickel, and their combinations with carbon materials or other materials. Finally, we compare the strengths and weaknesses of various preparation schemes and identify the state-of-the-art cutting-edge methodologies.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Mussel-inspired surface chemistry for multifunctional coatings
Lee, H., Dellatore, S. M., Miller, W. M., & Messersmith, P. B. (2007) · Science · doi:10.1126/science.1147241 · Cited by 10,965 · cited 1×
“excellent connection between different interfaces [76].”
(1990) · Cited by 9,358
2D metal carbides and nitrides (MXenes) for energy storage
Anasori, B., Lukatskaya, M. R., & Gogotsi, Y. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.98 · Cited by 7,440 · cited 1×
“The preparation scheme of MXenes is relatively simple [198], which is generally obtained by selective etching and spalling with hydrochloric acid and lithium fluoride through the method of minimum strength layer delamination [199].”
MethodElectromagnetic interference shielding with 2D transition metal carbides (MXenes)
Shahzad, F., Alhabeb, M., Hatter, C. B., Anasori, B., Man Hong, S., Koo, C. M., & Gogotsi, Y. (2016) · Science · doi:10.1126/science.aag2421 · Cited by 5,201 · cited 1×
“have prepared Ti3C2Tx-SA (sodium alginate) composites, which possess up to 92 dB EMI SE at a thickness of less than 500 μm [206].”
MethodGuidelines for Synthesis and Processing of Two-Dimensional Titanium Carbide (Ti3C2Tx MXene)
Alhabeb, M., Maleski, K., Anasori, B., Lelyukh, P., Clark, L., Sin, S., & Gogotsi, Y. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b02847 · Cited by 5,045 · cited 1×
“an important effect on conductivity [203].”
Anisotropic Metal Nanoparticles: Synthesis, Assembly, and Optical Applications
Murphy, C. J., Sau, T. K., Gole, A. M., Orendorff, C. J., Gao, J., Gou, L., Hunyadi, S. E., & Li, T. (2005) · The Journal of Physical Chemistry B · doi:10.1021/jp0516846 · Cited by 3,085 · cited 2×
“usually necessitates the preparation of metal ion precursors, whose concentration and pH value has a significant impact on the synthesis of metal nanoparticles [94].”
BackgroundUltra-high-rate pseudocapacitive energy storage in two-dimensional transition metal carbides
Lukatskaya, M. R., Kota, S., Lin, Z., Zhao, M.-Q., Shpigel, N., Levi, M. D., Halim, J., Taberna, P.-L., Barsoum, M. W., Simon, P., et al. (2017) · Nature Energy · doi:10.1038/nenergy.2017.105 · Cited by 2,335 · cited 2×
“) B: MXene structure [202], Copyright 2017.”
BackgroundMagnetron sputtering: a review of recent developments and applications
Kelly, P. J., & Arnell, R. D. (2000) · Vacuum · doi:10.1016/s0042-207x(99)00189-x · Cited by 2,136 · cited 1×
“present, PVD has been put into industrial application [252].”
BackgroundLipatov, A., Alhabeb, M., Lukatskaya, M. R., Boson, A., Gogotsi, Y., & Sinitskii, A. (2016) · Advanced Electronic Materials · doi:10.1002/aelm.201600255 · Cited by 1,751 · cited 1×
“But humidity can lead to oxidation of MXenes and thus reduce the conductivity [205].”
BackgroundElectromagnetic interference shielding of graphene/epoxy composites
Liang, J., Wang, Y., Huang, Y., Ma, Y., Liu, Z., Cai, J., Zhang, C., Gao, H., & Chen, Y. (2009) · Carbon · doi:10.1016/j.carbon.2008.12.038 · Cited by 1,334 · cited 1×
“Carbon materials (such as graphene [15], carbon nanotubes [16], and carbon fibers [17,18]) are extensively utilized in the design of EM interference shielding materials because of their remarkable conductivity and environmental friendliness.”
BackgroundNoise Reduction Techniques in Electronic Systems
Ott, H. W. (1976) · Cited by 1,315
Cao, M.-S., Cai, Y.-Z., He, P., Shu, J.-C., Cao, W.-Q., & Yuan, J. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.11.051 · Cited by 979
Current status of carbon fibre and carbon fibre composites recycling
Zhang, J., Chevali, V. S., Wang, H., & Wang, C.-H. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2020.108053 · Cited by 866 · cited 1×
“Carbon materials The carbon material is a widely used conductive filler that is preferred for its high conductivity, lack of pollution, high biocompatibility, and easy access [176].”
BackgroundSong, Q., Ye, F., Yin, X., Li, W., Li, H., Liu, Y., Li, K., Xie, K., Li, X., Fu, Q., et al. (2017) · Advanced Materials · doi:10.1002/adma.201701583 · Cited by 721 · cited 1×
“B, EMI SE is defined as the sum of reflection loss and absorption loss [47,48]:”
BackgroundGraphene-enabled electrically switchable radar-absorbing surfaces
Balci, O., Polat, E. O., Kakenov, N., & Kocabas, C. (2015) · Nature Communications · doi:10.1038/ncomms7628 · Cited by 664 · cited 1×
“have prepared electrically switched EM interference shielding surfaces using large-area of graphene [231].”
Yang, X., Fan, S., Li, Y., Guo, Y., Li, Y., Ruan, K., Zhang, S., Zhang, J., Kong, J., & Gu, J. (2019) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2019.105670 · Cited by 611 · cited 7×
“Li et al. employed N2H4 as a reducing agent to prepare a two-component Cu and Ni nanorod network structure [127].”
BackgroundMethodInfluentialUltrathin MXene‐Micropattern‐Based Field‐Effect Transistor for Probing Neural Activity
Xu, B., Zhu, M., Zhang, W., Zhen, X., Pei, Z., Xue, Q., Zhi, C., & Shi, P. (2016) · Advanced Materials · doi:10.1002/adma.201504657 · Cited by 593
Weng, G., Li, J., Alhabeb, M., Karpovich, C. J., Wang, H., Lipton, J., Maleski, K., Kong, J., Shaulsky, E., Elimelech, M., et al. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201803360 · Cited by 563
Self-citationZhou, J., Sun, Y., Du, X., Xiong, L., Hu, H., & Li, F. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.01.040 · Cited by 548
Zeng, Z., Wu, T., Han, D., Ren, Q., Siqueira, G., & Nyström, G. (2020) · ACS Nano · doi:10.1021/acsnano.9b07452 · Cited by 368 · cited 1×
“A nitrocellulose and silver nanowire composite was prepared through this scheme [290].”
MethodPolymeric and ceramic silicon-based coatings – a review
Barroso, G. S., Li, Q., Bordia, R. K., & Motz, G. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta09054h · Cited by 363 · cited 3×
“However, it is only suitable for more flat surfaces, and only one surface can be coated at a time [265].”
BackgroundBamboo-based composites: A review on fundamentals and processes of bamboo bonding
Nkeuwa, W. N., Zhang, J., Semple, K. E., Chen, M., Xia, Y., & Dai, C. (2022) · Composites Part B Engineering · doi:10.1016/j.compositesb.2022.109776 · Cited by 359 · cited 1×
“In addition, it has antibacterial properties [221].”
Liang, C., Ruan, K., Zhang, Y., & Gu, J. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c04482 · Cited by 347
Zeng, Z., Jiang, F., Yue, Y., Han, D., Lin, L., Zhao, S., Zhao, Y., Pan, Z., Li, C., Nyström, G., et al. (2020) · Advanced Materials · doi:10.1002/adma.201908496 · Cited by 336 · cited 19×
“created metal-encased cellular membranes through the attachment of PDA [5].”
BackgroundInfluentialWang, X.-Y., Liao, S.-Y., Wan, Y.-J., Zhu, P.-L., Hu, Y.-G., Zhao, T., Sun, R., & Wong, C.-P. (2022) · Journal of Materials Chemistry C · doi:10.1039/d1tc04702g · Cited by 309
Mahmoodi, M., Arjmand, M., Sundararaj, U., & Park, S. (2012) · Carbon · doi:10.1016/j.carbon.2011.11.004 · Cited by 306 · cited 1×
“Metal is a traditional conductive material [24] with a low price [2] and high mechanical properties.”
BackgroundLee, T., Lee, S.-E., & Jeong, Y. G. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b02218 · Cited by 295
Gao, Y., Wang, Y., Yue, T., Weng, Y., & Wang, M. (2020) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2020.08.037 · Cited by 290
Hu, M., Gao, J., Dong, Y., Li, K., Shan, G., Yang, S., & Li, R. K.-Y. (2012) · Langmuir · doi:10.1021/la300720y · Cited by 289 · cited 1×
“dissolution or thermal decomposition, to coat the target metal on the polymers [264].”
BackgroundZhang, H., Zhang, G., Gao, Q., Tang, M., Ma, Z., Qin, J., Wang, M., & Kim, J. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.122304 · Cited by 284 · cited 1×
“The loose structure not only reduces the density of the material but also increases the loss of EM waves during the propagation process [138].”
BackgroundHe, P., Cao, M.-S., Cai, Y.-Z., Shu, J.-C., Cao, W.-Q., & Yuan, J. (2020) · Carbon · doi:10.1016/j.carbon.2019.10.009 · Cited by 262
Electromagnetic absorber converting radiation for multifunction
Zhang, M., Cao, M.-S., Shu, J.-C., Cao, W.-Q., Li, L., & Yuan, J. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100627 · Cited by 246 · cited 1×
“The preparation of sensor devices that are sensitive to EM waves of different frequencies is also important in terms of artificial intelligence and human-computer interaction [237].”
BackgroundWang, J., Zhu, J., Tsehaye, M. T., Li, J., Dong, G., Yuan, S., Li, X., Zhang, Y., Liu, J., & Van der Bruggen, B. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta02661g · Cited by 240
Self-citationHe, P., Cao, M.-S., Shu, J.-C., Cai, Y.-Z., Wang, X.-X., Zhao, Q.-L., & Yuan, J. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b00593 · Cited by 229
Integrated multifunctional macrostructures for electromagnetic wave absorption and shielding
Wang, G., Ong, S. J. H., Zhao, Y., Xu, Z. J., & Ji, G. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta08515d · Cited by 223 · cited 1×
“Compressibility and layer gaps are also used to achieve tunability [232].”
MethodJiu, J., Nogi, M., Sugahara, T., Tokuno, T., Araki, T., Komoda, N., Suganuma, K., Uchida, H., & Shinozaki, K. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm35545k · Cited by 220 · cited 1×
“Like silver nanoparticle-polymer composites, silver nanowire-polymer composites still require a strong bond between them [89], and it is also very important for silver nanowires to establish”
BackgroundJia, Z., Kong, M., Yu, B., Ma, Y., Pan, J., & Wu, G. (2022) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2022.04.005 · Cited by 217 · cited 1×
“Aside from the well-known graphene, carbon nanotubes [179,180], reduced graphene oxide, etc.”
BackgroundGuo, H., Chen, Y., Li, Y., Zhou, W., Xu, W., Pang, L., Fan, X., & Jiang, S. (2021) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2021.106309 · Cited by 216 · cited 1×
“explain the application value of electrospinning in EM interference shielding materials [30].”
BackgroundOkazaki, K.-I., Kiyama, T., Hirahara, K., Tanaka, N., Kuwabata, S., & Torimoto, T. (2008) · Chem. Commun. · doi:10.1039/b714761a · Cited by 215
Developing MXenes from Wireless Communication to Electromagnetic Attenuation
He, P., Cao, M., Cao, W., & Yuan, J. (2021) · Nano-Micro Letters · doi:10.1007/s40820-021-00645-z · Cited by 215 · cited 1×
“4 For multiple reflections, it can be ignored in many cases, but for ultra-thin materials, it cannot be ignored [45], because when reaching the second interface for the first time, due to the small thickness and relatively small energy loss, the EM waves reflected by the second interface cannot be ignored.”
BackgroundZhou, M., Gu, W., Wang, G., Zheng, J., Pei, C., Fan, F., & Ji, G. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta08372k · Cited by 213 · cited 1×
“Hierarchical porous wood-derived carbon scaffolds combined with phase change materials allow for self-cleaning properties and thermal energy management of EM interference shielding materials [66]; natural wood used as a structural scaffold not only has many porous structures but is also very biocompatible [67].”
BackgroundMomeni, M. M., & Ghayeb, Y. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.02.137 · Cited by 213
Cao, M.-S., Shu, J.-C., Wen, B., Wang, X.-X., & Cao, W.-Q. (2021) · Small Structures · doi:10.1002/sstr.202100104 · Cited by 207
He, P., Wang, X.-X., Cai, Y.-Z., Shu, J.-C., Zhao, Q.-L., Yuan, J., & Cao, M.-S. (2019) · Nanoscale · doi:10.1039/c8nr10489a · Cited by 206
Wang, T., Wang, H., Chi, X., Li, R., & Wang, J. (2014) · Carbon · doi:10.1016/j.carbon.2014.03.037 · Cited by 205
Vural, M., Pena‐Francesch, A., Bars‐Pomes, J., Jung, H., Gudapati, H., Hatter, C. B., Allen, B. D., Anasori, B., Ozbolat, I. T., Gogotsi, Y., et al. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201801972 · Cited by 199 · cited 1×
“With the help of ink-jet printing, it is also possible to obtain EM shielding films with ultra-high conductivity [208].”
MethodHighly Breathable and Stretchable Strain Sensors with Insensitive Response to Pressure and Bending
Liu, Z., Zheng, Y., Jin, L., Chen, K., Zhai, H., Huang, Q., Chen, Z., Yi, Y., Umar, M., Xu, L., et al. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202007622 · Cited by 199 · cited 1×
“By depositing a copper layer on its surface, it has strain sensing characteristics and has the potential to become an EM interference shielding material [289].”
BackgroundSelf-citationWang, X.-X., Zhang, M., Shu, J.-C., Wen, B., Cao, W.-Q., & Cao, M.-S. (2021) · Carbon · doi:10.1016/j.carbon.2021.07.099 · Cited by 197
Chen, Y., Pang, L., Li, Y., Luo, H., Duan, G., Mei, C., Xu, W., Zhou, W., Liu, K., & Jiang, S. (2020) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2020.105960 · Cited by 196
Radoń, A., Hawełek, Ł., Łukowiec, D., Kubacki, J., & Włodarczyk, P. (2019) · Scientific Reports · doi:10.1038/s41598-019-56586-6 · Cited by 196 · cited 2×
“entropy values and the effect of disorder in conductive or magnetic fillers on the effectiveness of EM shielding [50] can help in the design of new materials.”
BackgroundTan, C., Su, J., Liu, Y., Feng, Z., Song, X., Wang, X., Chen, B., & Xia, H. (2022) · Composites Part B Engineering · doi:10.1016/j.compositesb.2022.109966 · Cited by 170
Zhou, M., Wang, J., Zhao, Y., Wang, G., Gu, W., & Ji, G. (2021) · Carbon · doi:10.1016/j.carbon.2021.07.051 · Cited by 168
Wang, Z., Mao, B., Wang, Q., Yu, J., Dai, J., Song, R., Pu, Z., He, D., Wu, Z., & Mu, S. (2018) · Small · doi:10.1002/smll.201704332 · Cited by 166 · cited 1×
“Several other researchers directly composite graphene film or carbon nanotube macro film with metal film to prepare flexible high-performance EM interference shielding materials [170,182].”
BackgroundZhang, H., Liu, T., Huang, Z., Cheng, J., Wang, H., Zhang, D., Ba, X., Zheng, G., Yan, M., & Cao, M. (2022) · Journal of Materiomics · doi:10.1016/j.jmat.2021.09.003 · Cited by 161 · cited 2×
“Green shielding materials without secondary pollution are also an attractive direction for the development of EMI SE [54,55].”
BackgroundYang, C., Tang, Y., Tian, Y., Luo, Y., He, Y., Yin, X., & Que, W. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201705487 · Cited by 160
Singh, A. P., Mishra, M., Hashim, D. P., Narayanan, T. N., Hahm, M. G., Kumar, P., Dwivedi, J., Kedawat, G., Gupta, A., Singh, A. P., et al. (2014) · Carbon · doi:10.1016/j.carbon.2014.12.065 · Cited by 155
Luo, J., Huo, L., Wang, L., Huang, X., Li, J., Guo, Z., Gao, Q., Hu, M., Xue, H., & Gao, J. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.123537 · Cited by 155
Self-citationAllison, L. K., Hoxie, S., & Andrew, T. L. (2017) · Chemical Communications · doi:10.1039/c7cc02592k · Cited by 152
Zhao, H., Hou, L., Bi, S., & Lu, Y. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b07941 · Cited by 150 · cited 1×
“also used this scheme to prepare PANI/Co–Ni Composites, layered linen fabric/polypyrrole/nickel (LF/PPy/Ni) composites, and CF/PPy/Cu composites for EMI SE [57, 287,288].”
MethodWang, Y., Wang, W., Ding, X., & Yu, D. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.122553 · Cited by 146 · cited 1×
“composites were also prepared by this strategy [167,193].”
MethodXu, Y., Lin, Z., Rajavel, K., Zhao, T., Zhu, P., Hu, Y., Sun, R., & Wong, C. (2021) · Nano-Micro Letters · doi:10.1007/s40820-021-00766-5 · Cited by 146 · cited 1×
“tried a feasible solution and were successful [143].”
MethodZhang, Z., Wang, G., Gu, W., Zhao, Y., Tang, S., & Ji, G. (2021) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2021.07.085 · Cited by 129 · cited 1×
“For example, PANI and cellulose are also used for microwave absorption and shielding by electrospinning techniques to form films [219].”
BackgroundZhan, Y., Hao, X., Wang, L., Jiang, X., Cheng, Y., Wang, C., Meng, Y., Xia, H., & Chen, Z. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c03692 · Cited by 129 · cited 2×
“first deposited silver nanowires on the surface of cellulose filter paper by the dipping method, followed by a PVD coating of nickel layer to create conductive composites with a wide range of applications [227].”
BackgroundMethodWu, L., Wang, L., Guo, Z., Luo, J., Xue, H., & Gao, J. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b11895 · Cited by 125 · cited 1×
“Super waterproof and corrosion-resistant shielding materials also have been developed [163].”
BackgroundHighly Conductive and Machine‐Washable Textiles for Efficient Electromagnetic Interference Shielding
Jia, L., Ding, K., Ma, R., Wang, H., Sun, W., Yan, D., Li, B., & Li, Z. (2018) · Advanced Materials Technologies · doi:10.1002/admt.201800503 · Cited by 125 · cited 1×
“even developed a machine washable EM interference shielding material [162].”
BackgroundA precise packing sequence for self-assembled convex structures
Chen, T., Zhang, Z., & Glotzer, S. C. (2007) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0604239104 · Cited by 123 · cited 1×
“different atomic numbers [70,71], Copyright 2017,”
Ali, A., Baheti, V., Vik, M., & Militký, J. (2019) · Journal of Physics and Chemistry of Solids · doi:10.1016/j.jpcs.2019.109181 · Cited by 122
Zhang, N., Zhao, R., He, D., Ma, Y., Qiu, J. S., Jin, C., & Wang, C. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.12.341 · Cited by 120 · cited 1×
“firstly constructed PAN/PU nanofiber membrane by electrospinning technology, and then plated a layer of Co–Ni alloy on its surface by the catalysis of silver nanoparticles [190].”
MethodDas, P., Ganguly, S., Perelshtein, I., Margel, S., & Gedanken, A. (2022) · ACS Applied Nano Materials · doi:10.1021/acsanm.1c04425 · Cited by 118
Yu, Y., Ma, C.-C. M., Teng, C., Huang, Y.-L., Lee, S.-H., Wang, I., & Wei, M. (2012) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2012.05.024 · Cited by 116
Kim, D. G., Choi, J. H., Choi, D. K., & Kim, S. W. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b07054 · Cited by 115 · cited 1×
“Physical methods usually include hot pressing [72], hot rolling [73], high-temperature sintering [74], and so on.”
Sang, M., Wang, S., Liu, S., Liu, M., Bai, L., Jiang, W., Xuan, S., & Gong, X. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b16120 · Cited by 110
Zia, Q., Tabassum, M., Meng, J., Xin, Z., Gong, H., & Li, J. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.11.101 · Cited by 110 · cited 1×
“In this way, the surface and gap of the polymer are filled with ethanol, and then the reaction solution can replace ethanol, resulting in a hydrophilic modification [110].”
BackgroundSelf-citationLi, S., Qian, K., Thaiboonrod, S., Wu, H., Cao, S., Miao, M., Shi, L., & Feng, X. (2021) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2021.106643 · Cited by 107 · cited 1×
“also produced multi-layer aramid nanofiber/silver nanowire film by filtration method, which was then hot-pressed to improve the mechanical properties of the material [147].”
MethodLiu, S., Sheng, M., Wu, H., Shi, X., Lu, X. H., & Qu, J. (2022) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2021.11.008 · Cited by 107 · cited 5×
“Zhang et al. applied radiation to polymerize in situ on the fabric surface to form a Fe3O4 magnetic connecting layer and then deposited nickel on the surface by electroless plating, to manufacture conductive fabric with excellent EMI SE.”
BackgroundInfluentialHu, Q., Zhou, N., Gong, K., Liu, H., Liu, Q., Sun, D., Wang, Q., Shao, Q., Liu, H., Qiu, B., et al. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b05847 · Cited by 105 · cited 1×
“Conductive polymer, also named synthetic metal [216], is also a reliable EM interference shielding material, such as polyaniline (PANI), poly (3,4-ethylenedioxythiophene) (PEDOT), poly (styrenesulfonate) (PSS), and so on.”
BackgroundXiao, Y.-Y., He, Y., Wang, R., Lei, Y.-Z., Yang, J., Qi, X., & Wang, Y. (2022) · Composites Part B Engineering · doi:10.1016/j.compositesb.2022.109962 · Cited by 104
Xu, Y., Qian, K., Deng, D., Luo, L., Ye, J., Wu, H., Miao, M., & Feng, X. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.116915 · Cited by 92
Kumar, S., Kumar, P., Gupta, R., & Verma, V. K. (2021) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2020.158331 · Cited by 89
Devi, N., & Ray, S. S. (2022) · Polymer Engineering and Science · doi:10.1002/pen.25876 · Cited by 89 · cited 4×
“sophisticated devices, communication safety [2], and biological health.”
BackgroundInfluentialRadiofrequency electromagnetic radiation-induced behavioral changes and their possible basis
Narayanan, S. N., Jetti, R., Kesari, K. K., Kumar, R. S., Nayak, S. B., & Bhat, K. M. R. (2019) · Environmental Science and Pollution Research · doi:10.1007/s11356-019-06278-5 · Cited by 85 · cited 1×
“The interleaving of different EM signals will lead to signal distortion [7–9]; Environmental pollution can be caused by a variety of sources of EM radiation [10–12]; EM waves interfere with organisms’ cellular functioning, impacting physiological health and perhaps leading to insomnia, stress, and other disorders [13].”
BackgroundStructural characteristics and electrical properties of copper doped manganese ferrite
Salah, L. M., Moustafa, A. M., & Farag, I. S. A. (2012) · Ceramics International · doi:10.1016/j.ceramint.2012.04.001 · Cited by 80 · cited 1×
“4Fe2O4 nanoparticles by chemical coprecipitation way in her article [185].”
BackgroundElectromagnetic Shielding Effectiveness of the Twill Copper Woven Fabrics
Cheng, K. B., Cheng, T., Nadaraj, R. N., Dev, V. R. G., & Neelakandan, R. (2006) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684406060578 · Cited by 78
Zhu, H., Fu, K., Yang, B. T., & Li, Y. (2021) · Composites Science and Technology · doi:10.1016/j.compscitech.2021.108675 · Cited by 75 · cited 2×
“With the increase of the level, the EMI SE increases, as shown in Table 4 [133].”
BackgroundMethodWang, W., Li, W., Cuicui, G., Tian, W., Sun, B., & Yu, D. (2015) · Applied Surface Science · doi:10.1016/j.apsusc.2015.01.188 · Cited by 71 · cited 1×
“Some other chemicals are also utilized to alter the polymer surface to facilitate the deposition of silver, such as (3-aminopropyl) triethoxysilane and 3-mercaptopropyltriethoxysilane [88].”
BackgroundHan, X., Huang, Y., Wang, J., Du, X., Hu, L. Y., Li, T., & Sun, X. (2022) · Composites Part B Engineering · doi:10.1016/j.compositesb.2022.109965 · Cited by 69 · cited 1×
“prepared a flexible material with adjustable EM shielding properties [230].”
Sutradhar, S., Saha, S., & Javed, S. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b05122 · Cited by 68
Huang, X., Dai, B., Ren, Y. P., Xu, J. J., & Zhu, P. (2015) · Journal of Nanomaterials · doi:10.1155/2015/320306 · Cited by 62 · cited 1×
“Then, a layer of nickel-cobalt alloy was plated on the carbon fiber film for enhancing the EMI SE [224].”
MethodBi, S., Zhao, H., Hou, L., & Lu, Y. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.04.176 · Cited by 59 · cited 1×
“project and obtained two different Co–Ni–P coatings with high EMI SE [136].”
BackgroundLu, Y., Liang, Q., & Li, W. (2013) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2013.03.068 · Cited by 57 · cited 1×
“However, it needs surface activation to coat copper and other metals on the surface [222].”
BackgroundCeramic coating deposition by electron beam evaporation
Окс, Е. М., Владимирович, Т. А., Yushkov, Y. G., & Zolotukhin, D. B. (2017) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2017.06.042 · Cited by 55 · cited 1×
“non-metals, and oxidation can be effectively avoided [247].”
BackgroundAyub, S., Guan, B. H., Ahmad, F., Javed, M. F., Mosavi, A. H., & Felde, I. (2021) · Metals · doi:10.3390/met11081164 · Cited by 51
Wu, L., Li, Y.-Z., Wang, B.-J., Mao, Z., Xu, H. Y., Zhong, Y. P., Zhang, L., & Sui, X. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.08.037 · Cited by 51
Ma, C., Guo, Z., Fang, Z., & Li, J. (2022) · Composites Part B Engineering · doi:10.1016/j.compositesb.2022.109967 · Cited by 50 · cited 1×
“Epoxy resins with phenylphosphonate groups can also be used for flame retardancy and are recyclable, making them an environmentally friendly flame retardant trim material [225].”
BackgroundSelf-citationPark, J.-B., Rho, H., Cha, A., Bae, H., Lee, S. H., Ryu, S., Jeong, T., & Ha, J. (2020) · Applied Surface Science · doi:10.1016/j.apsusc.2020.145745 · Cited by 46
Soares, B. G., Cordeiro, E., Maia, J., Pereira, E. C. L., & Silva, A. A. (2019) · Polymer Composites · doi:10.1002/pc.25347 · Cited by 45
Gao, D., Guo, S., Zhou, Y., Lyu, B., Ma, J., Zhao, P., Pan, D., & Chen, S. W. (2022) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2022.01.043 · Cited by 44 · cited 14×
“Li et al. prepared copper sulfide (CuxS)/PAN nanofiber mats with a thickness of only 423 μm, with an EMI SE of 31 dB and an EMI SE value per unit density of 16655.92 dB cm2g− 1, which is much higher than other similar materials [124].”
BackgroundInfluentialLee, S., Park, J., Kim, M. C., Kim, M., Park, P., Yoon, I., & Nah, J. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c06230 · Cited by 41 · cited 4×
“As previously indicated, physical processes include the hot pressing method [72] and the hot rolling method [73], which can change the structure and surface features of polymers, making it simpler to interact with metals to form”
MethodInfluentialZeraati, A. S., Anjaneyalu, A. M., Pawar, S. P., Abouelmagd, A., & Sundararaj, U. (2020) · Polymer Engineering and Science · doi:10.1002/pen.25591 · Cited by 40 · cited 1×
“tions, various conductive fillers can be added to molten polymers to prepare conductive composites [281].”
BackgroundLim, G., Kwon, N., Han, E.-J., Bok, S., Lee, S.-E., & Lim, B. (2020) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2020.09.030 · Cited by 38
Effect of silanization on copper coated milife fabric with improved EMI shielding effectiveness
Periyasamy, A. P., Yang, K., Xiong, X., Venkataraman, M., Militký, J., Mishra, R., & Křemenáková, D. (2019) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2019.122008 · Cited by 35 · cited 1×
“treatment to obtain the best copper deposition effect [119].”
BackgroundZhang, M., Wang, M., Zhang, M., Gao, Q., Feng, X., Zhang, Y., Hu, J., & Wu, G. (2020) · Organic Electronics · doi:10.1016/j.orgel.2020.105677 · Cited by 34 · cited 2×
“At the same time, due to the unique structure of the fabric, it has the ability of strain sensing after coating magnetic and conductive layers [109].”
BackgroundTong, G., Liu, Y., Liu, F., & Guan, J. (2015) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2015.10.058 · Cited by 33
Ali, A., Baheti, V., Javaid, M. U., & Militký, J. (2018) · Applied Physics A · doi:10.1007/s00339-018-2071-x · Cited by 31 · cited 1×
“In addition, electroplating will also affect the tensile properties, electrical properties, and metal adhesion of the composites [271].”
BackgroundJia, H., Yi, Z., Huang, X., Su, F., Kong, Q., Yang, X. P., Wang, Z., Xie, L., Guo, Q.-G., & Chen, C. (2021) · Carbon · doi:10.1016/j.carbon.2021.07.067 · Cited by 31
Mao, Y., Zhang, S., Wang, W., & Yu, D. (2018) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2018.09.028 · Cited by 28 · cited 14×
“Many EM interference shielding composites are prepared by using PDA as adhesive due to its good stability.”
MethodInfluentialPan, Y., Yin, D., Yu, X.-F., Hao, N., & Huang, J. (2020) · Coatings · doi:10.3390/coatings10080740 · Cited by 21 · cited 2×
“prepared copper-nickel wood composites with controllable EMI SE gradient [261].”
BackgroundMethodMitiche, I., Jenkins, M. D., Boreham, P., Nesbitt, A., & Morison, G. (2021) · Expert Systems with Applications · doi:10.1016/j.eswa.2021.114568 · Cited by 20
Electroluminescent strain sensing on carbon fiber reinforced polymer
Qiu, J. H., Idris, M. K., Grau, G., & Melenka, G. W. (2022) · Composites Part B Engineering · doi:10.1016/j.compositesb.2022.109893 · Cited by 18 · cited 1×
“discovered a waterproof and UV-resistant film that can be used to modify thin layers of EM shielding materials to further enhance their shielding properties [228].”
BackgroundPark, S. I., Kang, C. W., Cho, S. Y., Lee, S. M., Kim, H. J., Ko, Y., Choi, J., & Son, S. U. (2020) · Langmuir · doi:10.1021/acs.langmuir.0c00962 · Cited by 17
Li, T., Wang, X., Wang, Y., Shiu, B., Peng, H., Lou, C., & Lin, J. (2021) · Journal of Applied Polymer Science · doi:10.1002/app.51875 · Cited by 13 · cited 1×
“reported a scheme using ammonium polyphosphate (APP) as a flame retardant for EM interference shielding materials [77].”
MethodSuper-stretchable polymer-AgPdCu superlattice electrodes for high-performance wearable electronics
Sim, H., Oh, Y.-K., Yu, Y., Kim, S., & Kim, H. (2022) · Composites Part B Engineering · doi:10.1016/j.compositesb.2022.109914 · Cited by 13
Tran, T. T. V., Vo, D. N., Nguyen, S. T., Luu, S. D. N., Mofijur, M., & Vu, M. C. (2021) · Journal of Applied Polymer Science · doi:10.1002/app.51193 · Cited by 12 · cited 1×
“Some researchers also used the chemical method to coat silver nanoparticles on the cellulose scaffolds grafted with PDA before curing and immersing them in epoxy resin to create conductive composites [284].”
MethodChoudhury, S. R., & Chakraborty, R. (2021) · Environmental Science and Pollution Research · doi:10.1007/s11356-021-12793-1 · Cited by 9 · cited 1×
“EM waves can transmit information and energy quickly, making them useful in a variety of such as radio communication [1], electronic and electrical engineering [2], medicine [3,4], military [5], and so on [6].”
BackgroundFan, Z., Di, L., De-cai, B., Zhang, T., & Zhang, X. (2021) · Plasma Science and Technology · doi:10.1088/2058-6272/abe200 · Cited by 7 · cited 1×
“UV, light, and chemicals can also induce polymerization [115, 150].”
BackgroundYan, S., Li, P., Ju, Z., Chen, H., & Ma, J. (2021) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-021-06096-x · Cited by 7 · cited 1×
“There is also a graphene film/silver nanowire/graphene film with a sandwich structure, which can effectively enhance the connection of conductive networks and have good light transmittance [106].”
Background
Metadata
- Authors
- Chang, J., Zhai, H., Hu, Z., & Li, J.
- Venue
- Composites Part B: Engineering
- Publisher
- Elsevier BV
- Published
- 2022-11
- Volume
- 246
- Pages
- 110269
- ISSN
- 1359-8368 (ISSN-L)
- OpenAlex
- W4294915464
- Cited by
- 165
- References
- 116
- FWCI
- 7.11
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.