The DOI matches its Crossref record.
Determining the minimum, critical and maximum fibre content for twisted yarn reinforced plant fibre composites
Open accessAbstract
The effect of fibre volume fraction on the physical and tensile properties of aligned plant fibre composites (PFCs) produced via vacuum infusion has been investigated. There is no clear correlation between fibre volume fraction and porosity. However, low fibre content PFCs are prone to intra-yarn voids, while high fibre content PFCs are prone to inter-yarn voids. This is due to changing resin flow dynamics with increasing fibre content. The tensile behaviour of PFCs with increasing fibre content is similar to that of conventional fibre reinforced plastics (FRPs). Interestingly, the non-linear stress–strain response of plant fibres has been transferred to the composites. Fibre content and tensile properties are found to be linearly related, as per the rule of mixtures. A void content of up to 4% is found to have minimal effect on the tensile properties of PFCs. The minimum and critical (vf,crit) fibre volume fractions for aligned flax and jute–polyester composites are found to be substantially higher than conventional aligned FRPs; vf,crit for jute–polyester and carbon–polyester is 8.1% and 2.4%, respectively. A simple model has also been developed to approximate the theoretical maximum obtainable fibre volume fraction of PFCs reinforced with staple fibre yarns. The absolute theoretical maximum fibre content is found to be 58.9%, which agrees with experimental values in literature. A high vf,crit (∼10%) and low vf,max (∼45%) implies that the range of useful fibre volume fractions for PFCs containing staple fibre twisted yarns is only 35%.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A review of recent developments in natural fibre composites and their mechanical performance
Pickering, K. L., Efendy, M. G. A., & Le, T. M. (2016) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.08.038 · Cited by 3,479
Shah, D. U. (2013) · Journal of Materials Science · doi:10.1007/s10853-013-7458-7 · Cited by 532
Self-citationNatural fiber–reinforced composites: A review on material, manufacturing, and machinability
Lotfi, A., Li, H., Dao, D. V., & Prusty, G. (2021) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705719844546 · Cited by 499
Nurazzi, N. M., Asyraf, M. R. M., Fatimah Athiyah, S., Shazleen, S. S., Rafiqah, S. A., Harussani, M. M., Kamarudin, S. H., Razman, M. R., Rahmah, M., Zainudin, E. S., et al. (2021) · Polymers · doi:10.3390/polym13132170 · Cited by 462
State-of-the-art in wind turbine control: Trends and challenges
Njiri, J. G., & Söffker, D. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.01.110 · Cited by 348
The strength and stiffness of oriented wood and cellulose-fibre materials: A review
Jakob, M., Mahendran, A. R., Gindl-Altmutter, W., Bliem, P., Konnerth, J., Müller, U., & Veigel, S. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100916 · Cited by 292
Vishnu Vardhini, K., Murugan, R., & Surjit, R. (2018) · Journal of Industrial Textiles · doi:10.1177/1528083717714479 · Cited by 71
Metadata
- Authors
- Shah, D. U., Schubel, P. J., Licence, P., & Clifford, M. J.
- Venue
- Composites Science and Technology
- Publisher
- Elsevier BV
- Published
- 2012-10
- Volume
- 72
- Issue
- 15
- Pages
- 1909-1917
- ISSN
- 0266-3538 (ISSN-L)
- OpenAlex
- W1974023523
- Cited by
- 158
- References
- 0
- FWCI
- 5.53
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.