The DOI matches its Crossref record.
Study of drilling-induced defects for CFRP composites using new criteria
Abstract
Abstract Drilling carbon fiber reinforced polymer (CFRP) composites is liable to generate serious defects including burrs, tearing, delamination, fiber pullouts and matrix degradation because of their inherent anisotropy in mechanical properties. A comprehensive analysis of the drilling-induced damage for CFRP composites plays a vital role in accurate evaluation of machined hole quality and in assessment of utilized tool performance. The present paper aims to propose a series of adjusted damage criteria allowing a reliable quantification of extents of the most critical defects in drilling CFRP laminates including burrs, tearing and delamination. To verify the applicability of the proposed evaluation criteria, a number of drilling tests were performed on T800/X850 CFRP laminates using three types of drills including brad spur drills, twist drills and dagger drills. The superficial drilling-induced defects residing around the hole periphery were examined by a digital microscope and the interlaminar delamination was characterized using a high-frequency scanning acoustic microscope (SAM). The comparative effectiveness of specialized drill bits in drilling CFRP laminates was evaluated by means of the newly-developed damage criteria. The obtained results highlight the feasibility of the proposed evaluation method in quantifying the drilling-induced defects of CFRP laminates and in distinguishing the cutting performance between utilized drill bits.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Delamination formation, evaluation and suppression during drilling of composite laminates: A review
Geng, D., Liu, Y., Shao, Z., Lu, Z., Cai, J., Li, X., Jiang, X., & Zhang, D. (2019) · Composite Structures · doi:10.1016/j.compstruct.2019.02.099 · Cited by 465
Recent advances in drilling of carbon fiber–reinforced polymers for aerospace applications: a review
Aamir, M., Tolouei-Rad, M., Giasin, K., & Nosrati, A. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-04348-z · Cited by 329
Carbon fiber reinforced polymer in drilling: From damage mechanisms to suppression
Gao, T., Li, C., Wang, Y., Liu, X., An, Q., Li, H. N., Zhang, Y., Cao, H., Liu, B., Wang, D., et al. (2022) · Composite Structures · doi:10.1016/j.compstruct.2022.115232 · Cited by 275
Self-citationInvestigation of minimum quantity lubrication effects in drilling CFRP/Ti6Al4V stacks
Xu, J., Ji, M., Chen, M., & Ren, F. (2019) · Materials and Manufacturing Processes · doi:10.1080/10426914.2019.1661431 · Cited by 73
Self-citationJi, M., Xu, J., Chen, M., & Mansori, M. E. (2020) · Procedia Manufacturing · doi:10.1016/j.promfg.2020.02.118 · Cited by 40
Self-citation
Metadata
- Authors
- Xu, J., Li, C., Mi, S., An, Q., & Chen, M.
- Venue
- Composite Structures
- Publisher
- Elsevier BV
- Published
- 2018-10
- Volume
- 201
- Pages
- 1076-1087
- ISSN
- 0263-8223 (ISSN-L)
- OpenAlex
- W2809616058
- Cited by
- 245
- References
- 0
- FWCI
- 11.83
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.