The DOI matches its Crossref record; 43 of the 43 references it cites were found in a registry or an index.
Polymer composite materials: A comprehensive review
Abstract
Abstract Herein, in the present review we developed and investigated a comprehensive review of advanced composite materials based on thermoplastic polymers, elastomer polymers and thermosetting polymers. These advanced composite materials were reinforced by organic and/or inorganic fibers and formulated using various fillers such as organic, mineral and metallic. Further, we present the development and the synthesis of several macromolecular matrices namely polycarbonate, polyhexamethylene sebacic, polyether sulfone, polyether ether ketone, polyether ketone ketone, polyether imide, polyethylene terephthalate, phenoplasts, epoxy resin and polyurethane. The advantage of composite materials formulating is to have excellent mechanical performances, high thermal resistance, good fire behavior, high impact resistance, best abrasion resistance, exceptional electric insulation and good rigidity. Then, composite materials formulation were examined and discussed in detail.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Textile finishing dyes and their impact on aquatic environs
Berradi, M., Hsissou, R., Khudhair, M., Assouag, M., Cherkaoui, O., El Bachiri, A., & El Harfi, A. (2019) · Heliyon · doi:10.1016/j.heliyon.2019.e02711 · Cited by 1,006
Self-citationM.R., S., Siengchin, S., Parameswaranpillai, J., Jawaid, M., Pruncu, C. I., & Khan, A. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.11.083 · Cited by 999
A review on dynamic mechanical properties of natural fibre reinforced polymer composites
Saba, N., Jawaid, M., Alothman, O. Y., & Paridah, M. T. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.12.075 · Cited by 962
Impact behaviour of hybrid composites for structural applications: A review
Safri, S. N. A., Sultan, M. T. H., Jawaid, M., & Jayakrishna, K. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2017.09.008 · Cited by 626
Additively manufactured carbon fiber-reinforced composites: State of the art and perspective
van de Werken, N., Tekinalp, H., Khanbolouki, P., Ozcan, S., Williams, A., & Tehrani, M. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2019.100962 · Cited by 566
Advances in 3D printing of thermoplastic polymer composites and nanocomposites
Valino, A. D., Dizon, J. R. C., Espera, A. H., Chen, Q., Messman, J., & Advincula, R. C. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.101162 · Cited by 565
Natural fiber reinforced polylactic acid composites: A review
Siakeng, R., Jawaid, M., Ariffin, H., Sapuan, S. M., Asim, M., & Saba, N. (2019) · Polymer Composites · doi:10.1002/pc.24747 · Cited by 524
Thermal transport in polymeric materials and across composite interfaces
Mehra, N., Mu, L., Ji, T., Yang, X., Kong, J., Gu, J., & Zhu, J. (2018) · Applied Materials Today · doi:10.1016/j.apmt.2018.04.004 · Cited by 453
Mechanical properties evaluation of sisal fibre reinforced polymer composites: A review
Senthilkumar, K., Saba, N., Rajini, N., Chandrasekar, M., Jawaid, M., Siengchin, S., & Alotman, O. Y. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.04.143 · Cited by 415
Banana Fiber Reinforced Polymer Composites - A Review
Venkateshwaran, N., & Elayaperumal, A. (2010) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684409360578 · Cited by 330
Hsissou, R., Dagdag, O., Abbout, S., Benhiba, F., Berradi, M., El Bouchti, M., Berisha, A., Hajjaji, N., & Elharfi, A. (2019) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2019.03.180 · Cited by 260
Self-citationDas, P., & Tiwari, P. (2019) · Thermochimica Acta · doi:10.1016/j.tca.2019.178340 · Cited by 196
Hsissou, R., Abbout, S., Berisha, A., Berradi, M., Assouag, M., Hajjaji, N., & Elharfi, A. (2019) · Journal of Molecular Structure · doi:10.1016/j.molstruc.2018.12.030 · Cited by 190
Self-citationDong, Z.-J., Zhou, T., Luan, H., Williams, R. C., Wang, P., & Leng, Z. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.01.004 · Cited by 164
Amrollahi, S., Ramezanzadeh, B., Yari, H., Ramezanzadeh, M., & Mahdavian, M. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.05.015 · Cited by 155
Rheological properties and micro-characteristics of polyurethane composite modified asphalt
Jin, X., Guo, N., You, Z., Wang, L., Wen, Y., & Tan, Y. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.117395 · Cited by 140
Zhou, W., Kou, Y., Yuan, M., Li, B., Cai, H., Li, Z., Chen, F., Liu, X., Wang, G., Chen, Q., et al. (2019) · Composites Science and Technology · doi:10.1016/j.compscitech.2019.107686 · Cited by 139
An insight into additive manufacturing of fiber reinforced polymer composite
Zindani, D., & Kumar, K. (2019) · International Journal of Lightweight Materials and Manufacture · doi:10.1016/j.ijlmm.2019.08.004 · Cited by 136
Pin, G., Yu, Y., Li, H., Zhang, D., Gong, A., Li, S., Liu, W., Cheng, L., Qiu, Y., Yao, W., et al. (2019) · Scientific Reports · doi:10.1038/s41598-019-42588-x · Cited by 131
Natural fiber reinforced poly(vinyl chloride) composites: A review
Khalil, H. P. S. A., Tehrani, M., Davoudpour, Y., Bhat, A. H., Jawaid, M., & Hassan, A. (2012) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684412458553 · Cited by 127
Nacre-inspired polymer composites with high thermal conductivity and enhanced mechanical strength
Zhang, T., Sun, J., Ren, L., Yao, Y., Wang, M., Zeng, X., Sun, R., Xu, J., & Wong, C. (2019) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2019.03.017 · Cited by 122
Asim, M., Jawaid, M., Nasir, M., & Saba, N. (2017) · JOURNAL OF RENEWABLE MATERIALS · doi:10.7569/jrm.2017.634162 · Cited by 117
Woven hybrid composites: Water absorption and thickness swelling behaviors
Khalil, H. P. S. A., Jawaid, M., & Bakar, A. A. (2011) · BioResources · doi:10.15376/biores.6.2.1043-1052 · Cited by 113
Development and characterization of epoxy nanocomposites based on nano-structured oil palm ash
Khalil, H. P. S. A., Fizree, H. M., Bhat, A. H., et al. (2013) · Composites Part B Engineering · doi:10.1016/j.compositesb.2013.04.013 · Cited by 111
Tarhini, A. A., & Tehrani‐Bagha, A. R. (2019) · Composites Science and Technology · doi:10.1016/j.compscitech.2019.107797 · Cited by 109
Benkhaya, S., M’rabet, S., Hsissou, R., & Harfi, A. E. (2020) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2020.02.102 · Cited by 92
Self-citationPolymer grafting on graphene layers by controlled radical polymerization
Eskandari, P., Abousalman‐Rezvani, Z., Roghani‐Mamaqani, H., Salami‐Kalajahi, M., & Mardani, H. (2019) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2019.102021 · Cited by 90
Orcioli‐Silva, D., Barbieri, F. A., dos Santos, P. C. R., Beretta, V. S., Simieli, L., Vitório, R., Lirani‐Silva, E., & Gobbi, L. T. B. (2020) · Scientific Reports · doi:10.1038/s41598-020-59266-y · Cited by 80
Datsyuk, V., Trotsenko, S., Trakakis, G., Boden, A., Vyzas-Asimakopoulos, K., Parthenios, J., Galiotis, C., Reich, S., & Papagelis, K. (2019) · Polymer Testing · doi:10.1016/j.polymertesting.2019.106317 · Cited by 76
Hsissou, R., Benhiba, F., Echihi, S., Benkhaya, S., Hilali, M., Бериша, А., Briche, S., Zarrouk, A. M., Nouneh, K., & Elharfi, A. (2020) · Chemical Data Collections · doi:10.1016/j.cdc.2020.100619 · Cited by 73
Self-citationLin, J., Wang, L., Liu, L., Lu, K., Li, G., & Yang, X. (2020) · Composites Science and Technology · doi:10.1016/j.compscitech.2020.108114 · Cited by 65
Hernández-Velasco, P., Morales-Atilano, I., Rodríguez-Delgado, M. M., Rodríguez-Delgado, J. M., Luna-Moreno, D., Ávalos‐Alanís, F. G., & Villarreal-Chiu, J. F. (2020) · Dyes and Pigments · doi:10.1016/j.dyepig.2020.108278 · Cited by 54
Rheology of polymer–carbon nanotube composites melts
Nobile, M. R. (2011) · Elsevier eBooks · doi:10.1533/9780857091390.2.428 · Cited by 53
Yan, W., Wang, S., Ding, R., Tian, X., Bai, R., Gang, H., Yan, W., Xiao, Y., & Zhao, F. (2018) · Bioresource Technology · doi:10.1016/j.biortech.2018.12.053 · Cited by 51
Baek, Y.-M., Shin, P.-S., Kim, J.-H., Park, H.-S., DeVries, K. L., & Park, J. (2019) · Polymer Testing · doi:10.1016/j.polymertesting.2019.106247 · Cited by 42
Zakaulla, M., Parveen, F., Amreen, Harish, & Ahmad, N. (2020) · Materials Today Proceedings · doi:10.1016/j.matpr.2019.11.276 · Cited by 42
Souza, P. R., Nunes, C. S., Freitas, A. R., Belinato, J. R., Pilau, E. J., Fajardo, A. R., Filho, E. A. D. S., Schreiner, W. H., & Muniz, E. C. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.119984 · Cited by 31
Chen, J., & Gao, X. (2019) · Diamond and Related Materials · doi:10.1016/j.diamond.2019.107571 · Cited by 29
Seghiri, R., Legrand, J., Hsissou, R., & Essamri, A. (2020) · Algal Research · doi:10.1016/j.algal.2020.102165 · Cited by 29
Self-citationLiu, Y., Chen, Z., Shen, Y., Zhou, Y., Wang, D., Lei, Z., Feng, W., & Min, Z. (2019) · Materials Letters · doi:10.1016/j.matlet.2019.127002 · Cited by 25
Armstrong, D. P., Chatterjee, K., Ghosh, T. K., & Spontak, R. J. (2020) · Thermochimica Acta · doi:10.1016/j.tca.2020.178566 · Cited by 19
Rheological properties of stabilizers at low temperatures in concentrated sucrose solutions
Masselot, V., Benkhelifa, H., Cuvelier, G., & Bosc, V. (2020) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2020.105691 · Cited by 17
Harfaouia, N. E., Khaaissa, Y., Nouneh, K., Belahmar, A., Talbi, A., Mabrouk, K. E., Hsissou, R., Feddi, E., Taleb, A., & Mouakibi, A. E. (2020) · The European Physical Journal Applied Physics · doi:10.1051/epjap/2020200130 · Cited by 15
Self-citation
Cited by
Recent advances in tribology of high entropy alloys: A critical review
Kumar, D. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101106 · Cited by 310
Recent Advances in Development of Waste-Based Polymer Materials: A Review
Formela, K., Kurańska, M., & Barczewski, M. (2022) · Polymers · doi:10.3390/polym14051050 · Cited by 70
Metadata
- Authors
- Hsissou, R., Seghiri, R., Benzekri, Z., Hilali, M., Rafik, M., & Elharfi, A.
- Venue
- Composite Structures
- Publisher
- Elsevier BV
- Published
- 2021-04
- Volume
- 262
- Pages
- 113640
- ISSN
- 0263-8223 (ISSN-L)
- OpenAlex
- W3121219541
- Cited by
- 1,136
- References
- 43
- FWCI
- 69.07
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.