The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Influence of curing conditions on the mechanical performance of concrete containing recycled plastic aggregate
Open accessAbstract
To study the influence of curing conditions on the mechanical performance of concrete containing waste plastic aggregate several mixes were produced with replacement ratios of 0%, 7.5% and 15% of natural aggregates by three types of plastic aggregate. The mechanical performance was evaluated under three curing environments (laboratory conditions, wet chamber, and outer environment) to represent different conditions concrete may be subject to. Increasing the ratio of plastic incorporated and its size leads to a fall in compressive and splitting tensile strength and modulus of elasticity of concrete. It improved its wear resistance to abrasion, however. Damper environments were best for the performance of concrete without plastic. The sensitivity of concrete with plastic to curing conditions changes with the replacement ratio and depends on the property being studied. With higher percentages of plastic the mixed curing environments tended to give the best results for the properties most dependent on the bond between the plastic waste aggregates and the cement paste. It was also found that the response of concrete to the incorporation of plastic differs between curing regimes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Albano, C., Camacho, N., Hernández, M., Matheus, A., & Gutiérrez, A. (2009) · Waste Management · doi:10.1016/j.wasman.2009.05.007 · Cited by 504
Cited by
Silva, R. V., de Brito, J., & Dhir, R. K. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.04.117 · Cited by 1,229
Self-citationUse of recycled plastics in concrete: A critical review
Gu, L., & Ozbakkaloglu, T. (2016) · Waste Management · doi:10.1016/j.wasman.2016.03.005 · Cited by 727
Saikia, N., & de Brito, J. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.11.049 · Cited by 528
Self-citationde Brito, J., & Kurda, R. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.123558 · Cited by 436
Self-citationSayadi, A. A., Tapia, J. V., Neitzert, T. R., & Clifton, G. C. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.02.218 · Cited by 428
Metadata
- Authors
- Ferreira, L., de Brito, J., & Saikia, N.
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2012-11
- Volume
- 36
- Pages
- 196-204
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W1992682280
- Cited by
- 222
- References
- 1
- FWCI
- 13.08
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.