The DOI matches its Crossref record; 878 of the 878 references it cites were found in a registry or an index.
The past and future of sustainable concrete: A critical review and new strategies on cement-based materials
Abstract
Abstract The negative impacts of cement-based material (CBM) production are way bigger than ever expected. To illustrate the scale of this phenomenon, all the forests in the world, regardless of the fact that they are disappearing at an alarming rate, are not enough to offset even half the environmental impact (EI) of global aggregates and cement production. Thus, it is necessary to promote scientific research and guide more researchers and professionals in the construction industry to investigate the undiscovered sustainability paths, namely for concrete before and after end-of-life. For that purpose, a global and extensive review is made here to provide an overall view of concrete sustainability in all possible paths. Then, each path is organized as follows: (i) brief introduction, (ii) presentation of non-traditional materials and techniques that can be used for the selected strategy, (iii) their limitations and (iv) future trends. The study also identifies what is already known to avoid putting valuable research resources into redundant scientific studies. The following paths of concrete production sustainability were identified: mix composition (e.g. reduce the EI and resources use of binders, aggregates, water and reinforcement), materials manufacturing (e.g. new production techniques of cement, aggregates and steel bars), concrete mixing (e.g. mixer type and mixing method), on-site application (e.g. regular casting and digital concrete/3D printing), and in-service performance (e.g. increase the durability of reinforced concrete and carbon capture and thermal conductivity). On most of these paths, many studies have been made on the same non-traditional materials and techniques and similar outputs were obtained. Yet, many other non-traditional materials and techniques have not been explored before, or are incomplete in terms of the characteristics analysed. More than providing definite solutions, this contribution intends to open the minds of the readers to the vastly unexplored world of “green concrete”.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
Jalal, M., Pouladkhan, A., Harandi, O. F., & Jafari, D. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.07.001 · Cited by 394
RetractedIOP Conference Series: Materials Science and Engineering
(2022) · IOP Conference Series: Materials Science and Engineering · doi:10.1088/1757-899x/1231/1/011001 · Cited by 10,357
Concrete: Microstructure, Properties, and Materials
Mehta, P. K., & Monteiro, P. J. M. (2005) · Cited by 5,607
Scrivener, K. L., John, V. M., & Gartner, E. M. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.03.015 · Cited by 3,620
An overview of the chemical composition of biomass
Vassilev, S. V., Baxter, D., Andersen, L. K., & Vassileva, C. G. (2010) · Fuel · doi:10.1016/j.fuel.2009.10.022 · Cited by 2,519
JOHN, M., & THOMAS, S. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.05.040 · Cited by 2,453
Mechanical properties of nylon 6-clay hybrid
Kojima, Y., Usuki, A., Kawasumi, M., Okada, A., Fukushima, Y., Kurauchi, T., & Kamigaito, O. (1993) · Journal of Materials Research · doi:10.1557/jmr.1993.1185 · Cited by 2,442
A review on the tensile properties of natural fiber reinforced polymer composites
Ku, H., Wang, H., Pattarachaiyakoop, N., & Trada, M. (2011) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2011.01.010 · Cited by 2,280
Candle Soot as a Template for a Transparent Robust Superamphiphobic Coating
Deng, X., Mammen, L., Butt, H.-J., & Vollmer, D. (2012) · Science · doi:10.1126/science.1207115 · Cited by 2,053
Lea's Chemistry of Cement and Concrete
(2019) · Elsevier eBooks · doi:10.1016/c2013-0-19325-7 · Cited by 1,901
Cited by
Miller, S. A., Habert, G., Myers, R. J., & Harvey, J. T. (2021) · One Earth · doi:10.1016/j.oneear.2021.09.011 · Cited by 308
Scope, C., Guenther, E., Schütz, J., Mielecke, T., Mündecke, E., Schultze, K., & Saling, P. (2020) · Civil Engineering Design · doi:10.1002/cend.202000024 · Cited by 22
Metadata
- Authors
- de Brito, J., & Kurda, R.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2021-01
- Volume
- 281
- Pages
- 123558
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W3086090482
- Cited by
- 436
- References
- 878
- FWCI
- 30.29
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The past and future of sustainable concrete: A critical review and new strategies on cement-based materials. https://app.cochat.ai/papers/10.1016/j.jclepro.2020.123558
- The paper
- de Brito, J., & Kurda, R. (2021). The past and future of sustainable concrete: A critical review and new strategies on cement-based materials. Journal of Cleaner Production. https://doi.org/10.1016/j.jclepro.2020.123558
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.