The DOI matches its Crossref record.
Use of slag to improve mechanical properties of engineered cementitious composites (ECCs) with high volumes of fly ash
Open accessAbstract
Fly ash (FA) has been a necessary ingredient for engineered cementitious composites (ECCs) with excellent tensile strain capacity and multiple cracking. However, ECC with high volumes of FA has lower matrix strength, especially at early age. The purpose of this paper is to develop a kind of green ECC with high tensile ductility and strong enough matrix strength, especially at early age. A series of investigations has carried out to evaluate mechanical properties and drying shrinkage of ECC with 70% combination mineral admixtures of FA and ground granulated blast furnace slag (SL). The experimental results show that ECC with combination mineral admixtures can achieve strain hardening behavior, tensile capacity of ECC can be more than 2.5% at 90 days. Meanwhile, compared to ECC only with FA, SL and FA can effectively increase compressive strength of ECC, especially at early age. Incorporating SL into matrix can slightly increase drying shrinkage of ECC. However, among four ECC mixtures, ECC with 30% SL and 40% FA presents the lowest drying shrinkage at later ages.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
On the emergence of 3D printable Engineered, Strain Hardening Cementitious Composites (ECC/SHCC)
Li, V. C., Bos, F. P., Yu, K., McGee, W., Ng, T. Y., Figueiredo, S. C., Nefs, K., Mechtcherine, V., Nerella, V. N., Pan, J., et al. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106038 · Cited by 342
A brief on high-volume Class F fly ash as cement replacement – A guide for Civil Engineer
Rashad, A. M. (2015) · International Journal of Sustainable Built Environment · doi:10.1016/j.ijsbe.2015.10.002 · Cited by 291
Guo, P., Meng, W., Xu, M., Li, V. C., & Bao, Y. (2021) · Materials · doi:10.3390/ma14123143 · Cited by 114
Metadata
- Authors
- Zhu, Y., Yang, Y., & Yao, Y.
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2012-11
- Volume
- 36
- Pages
- 1076-1081
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W1964868392
- Cited by
- 197
- References
- 0
- FWCI
- 7.05
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.