The DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.
Mechanical properties and abrasion behaviour of concrete containing shredded PET bottle waste as a partial substitution of natural aggregate
Open accessAbstract
The purpose of this work is to evaluate the effects of size and shape of recycled polyethylene terephthalate (PET) aggregate on the fresh and hardened properties, including abrasion resistance, of concrete. 5%, 10% and 15% in volume of natural aggregate in the concrete mixes were replaced by an equal volume of three differently shaped and sized PET-aggregates. The results indicate that the slump of fresh concrete increases slightly with the incorporation of pellet-shaped PET-aggregate. Flakier plastic aggregate sharply decreases the slump of the fresh concrete and it further decreases if the content and size of this type of PET-aggregate increase. The compressive strength, tensile splitting strength, modulus of elasticity and flexural strength of concrete deteriorate due to the incorporation of PET-aggregate and the deterioration of these properties intensifies with increasing content of this aggregate. Differences in size, shape and texture of PET-aggregates change the water to cement ratio as well as the slump of fresh concrete mixes, which ultimately change the mechanical behaviour. Flaky PET-aggregates bridge the two separated concrete pieces and therefore prevent concrete from breaking apart after failure. The abrasion resistance of concrete mixes containing various types of PET-aggregate is better than that of the reference concrete. The abrasion resistance of concrete with incorporation of various types and contents of PET-aggregates can be related to its compressive strength.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Use of recycled plastic in concrete: A review
Siddique, R., Khatib, J., & Kaur, I. (2008) · Waste Management · doi:10.1016/j.wasman.2007.09.011 · Cited by 1,108
Use of waste plastic in concrete mixture as aggregate replacement
Ismail, Z. Z., & AL-Hashmi, E. A. (2008) · Waste Management · doi:10.1016/j.wasman.2007.08.023 · Cited by 719
Use of plastic waste as aggregate in cement mortar and concrete preparation: A review
Saikia, N., & de Brito, J. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.02.066 · Cited by 709
Self-citationEffects of waste PET bottles aggregate on the properties of concrete
Choi, Y.-W., Moon, D.-J., Chung, J.-S., & Cho, S.-K. (2005) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.05.014 · Cited by 586
Abrasion resistance of concrete containing nano-particles for pavement
Li, H., Zhang, M.-H., & Ou, J.-P. (2006) · Wear · doi:10.1016/j.wear.2005.08.006 · Cited by 562
Material and structural performance evaluation of recycled PET fiber reinforced concrete
Kim, S. B., Yi, N. H., Kim, H. Y., Kim, J.-H. J., & Song, Y.-C. (2010) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2009.11.002 · Cited by 544
Recycling of PET bottles as fine aggregate in concrete
Frigione, M. (2010) · Waste Management · doi:10.1016/j.wasman.2010.01.030 · Cited by 528
Albano, C., Camacho, N., Hernández, M., Matheus, A., & Gutiérrez, A. (2009) · Waste Management · doi:10.1016/j.wasman.2009.05.007 · Cited by 504
Valorization of post-consumer waste plastic in cementitious concrete composites
Marzouk, O. Y., Dheilly, R. M., & Queneudec, M. (2007) · Waste Management · doi:10.1016/j.wasman.2006.03.012 · Cited by 473
Kou, S. C., Lee, G., Poon, C. S., & Lai, W. L. (2009) · Waste Management · doi:10.1016/j.wasman.2008.06.014 · Cited by 392
An investigation on the use of shredded waste PET bottles as aggregate in lightweight concrete
Akçaözoğlu, S., Atiş, C. D., & Akçaözoğlu, K. (2010) · Waste Management · doi:10.1016/j.wasman.2009.09.033 · Cited by 385
Physical and mechanical properties of mortars containing PET and PC waste aggregates
Hannawi, K., Kamali-Bernard, S., & Prince, W. (2010) · Waste Management · doi:10.1016/j.wasman.2010.03.028 · Cited by 374
Choi, Y. W., Moon, D. J., Kim, Y. J., & Lachemi, M. (2009) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2009.02.036 · Cited by 346
A novel material for lightweight concrete production
Kan, A., & Demirboğa, R. (2009) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2009.05.002 · Cited by 326
Reuse of thermosetting plastic waste for lightweight concrete
Panyakapo, P., & Panyakapo, M. (2007) · Waste Management · doi:10.1016/j.wasman.2007.08.006 · Cited by 231
Degradation of recycled PET fibers in Portland cement-based materials
Silva, D. A., Betioli, A. M., Gleize, P. J. P., Roman, H. R., Gómez, L. A., & Ribeiro, J. L. D. (2005) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.10.040 · Cited by 229
Silva, R. V., de Brito, J., & Saikia, N. (2013) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2012.08.017 · Cited by 227
Self-citationFerreira, L., de Brito, J., & Saikia, N. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.02.098 · Cited by 222
Self-citationThermal insulation enhancement in concretes by adding waste PET and rubber pieces
Yesilata, B., Isıker, Y., & Turgut, P. (2009) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2008.09.014 · Cited by 220
Mounanga, P., Gbongbon, W., Poullain, P., & Turcry, P. (2008) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2008.06.007 · Cited by 218
Use of post-consumer waste plastics in cement-based composites
Naik, T. R., Singh, S. S., Huber, C. O., & Brodersen, B. S. (1996) · Cement and Concrete Research · doi:10.1016/0008-8846(96)00135-4 · Cited by 193
Valorization of coarse rigid polyurethane foam waste in lightweight aggregate concrete
Ben Fraj, A., Kismi, M., & Mounanga, P. (2010) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2009.11.010 · Cited by 185
Asokan, P., Osmani, M., & Price, A. (2010) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2009.10.017 · Cited by 173
Concrete Containing Plastic Aggregates
Al-Manaseer, A. A., & Dalal, T. (1997) · ACI Concrete International · Cited by 161
High Volume Fly Ash Abrasion Resistant Concrete
Atiş, C. D. (2002) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)0899-1561(2002)14:3(274 · Cited by 150
Application of LCA as a decision-making tool for waste management systems: Material flow modelling
Askham, C., Modahl, I. S., Raadal, H. L., & Hanssen, O. J. (2003) · The International Journal of Life Cycle Assessment · doi:10.1007/bf02978506 · Cited by 28
Cited by
Silva, R. V., de Brito, J., & Dhir, R. K. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.04.117 · Cited by 1,229
Self-citationUse of recycled plastics in concrete: A critical review
Gu, L., & Ozbakkaloglu, T. (2016) · Waste Management · doi:10.1016/j.wasman.2016.03.005 · Cited by 727
Use of different forms of waste plastic in concrete – a review
Sharma, R., & Bansal, P. P. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.08.042 · Cited by 419
Eco-friendly concrete containing recycled plastic as partial replacement for sand
Almeshal, I., Tayeh, B. A., Alyousef, R., Alabduljabbar, H., & Mohamed, A. M. (2020) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2020.02.090 · Cited by 319
Use of recycled plastic as fine aggregate in cementitious composites: A review
Almeshal, I., Tayeh, B. A., Alyousef, R., Alabduljabbar, H., Mustafa Mohamed, A., & Alaskar, A. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.119146 · Cited by 313
Metadata
- Authors
- Saikia, N., & de Brito, J.
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2014-02
- Volume
- 52
- Pages
- 236-244
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W1969876335
- Cited by
- 528
- References
- 26
- FWCI
- 17.33
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.