The DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
Workability and mechanical properties of alkali-activated fly ash-slag concrete cured at ambient temperature
Open accessAbstract
Alkali-activated fly ash-slag (AAFS) concrete is a new blended alkali-activated concrete that has been increasingly studied over the past decades because of its environmental benefits and superior engineering properties. However, there is still a lack of comprehensive studies on the effect of different factors on the fresh and hardened properties of AAFS concrete. This paper aims to provide a thorough understanding of workability and mechanical properties of AAFS concrete cured at ambient temperature and to obtain the optimal mixtures for engineering application. A series of experiments were carried out to measure workability, setting time, compressive strength, splitting tensile strength, flexural strength and dynamic elastic modulus of AAFS concrete. The results showed that workability and setting time decreased with the increase of slag content and molarity of sodium hydroxide solution (SH). Compressive strength increased with the increase of slag content and molarity of SH as well as the decrease of alkaline activator to binder (AL/B) ratio, but it did not have significant relationship with sodium silicate to sodium hydroxide (SS/SH) ratio. In addition, equations provided by ACI code, Eurocode and previous researchers for ordinary Portland cement concrete overestimated the values of splitting tensile strength, flexural strength and dynamic elastic modulus of AAFS concrete. The optimal mixtures of AAFS concrete were set as slag content of 20–30%, AL/B ratio of 0.4, 10 M of SH, and SS/SH ratio of 1.5–2.5 considering the performance criteria of workability, setting time and compressive strength.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The role of inorganic polymer technology in the development of ‘green concrete’
Duxson, P., Provis, J. L., Lukey, G. C., & van Deventer, J. S. J. (2007) · Cement and Concrete Research · doi:10.1016/j.cemconres.2007.08.018 · Cited by 1,998
Nath, P., & Sarker, P. K. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.05.080 · Cited by 1,557
Advances in understanding alkali-activated materials
Provis, J. L., Palomo, A., & Shi, C. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.04.013 · Cited by 1,537
318-19 Building Code Requirements for Structural Concrete and Commentary
(2019) · American Concrete Institute eBooks · doi:10.14359/51716937 · Cited by 1,289
Standard Test Method for Slump of Hydraulic-Cement Concrete
C09 Committee (2008) · doi:10.1520/c0143_c0143m · Cited by 1,095
Fly ash-based geopolymer: clean production, properties and applications
Zhuang, X. Y., Chen, L., Komarneni, S., Zhou, C. H., Tong, D. S., Yang, H. M., Yu, W. H., & Wang, H. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.03.019 · Cited by 1,020
NaOH-activated ground fly ash geopolymer cured at ambient temperature
Somna, K., Jaturapitakkul, C., Kajitvichyanukul, P., & Chindaprasirt, P. (2011) · Fuel · doi:10.1016/j.fuel.2011.01.018 · Cited by 995
Deb, P. S., Nath, P., & Sarker, P. K. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.05.001 · Cited by 941
The mechanical properties of fly ash-based geopolymer concrete with alkaline activators
Ryu, G. S., Lee, Y. B., Koh, K. T., & Chung, Y. S. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.05.069 · Cited by 927
Alkali-activated fly ash/slag cements
Puertas, F., Martı́nez-Ramı́rez, S., Alonso, S., & Vázquez, T. (2000) · Cement and Concrete Research · doi:10.1016/s0008-8846(00)00298-2 · Cited by 921
Alkali Activated Materials: State-of-the-Art Report, RILEM TC 224-AAM
(2014) · RILEM State-of-the-Art Reports · doi:10.1007/978-94-007-7672-2 · Cited by 906
van Jaarsveld, J. G. S., van Deventer, J. S. J., & Lukey, G. C. (2002) · Chemical Engineering Journal · doi:10.1016/s1385-8947(02)00025-6 · Cited by 898
Assessment of CO2 reduction of alkali-activated concrete
Yang, K.-H., Song, J.-K., & Song, K.-I. (2013) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2012.08.001 · Cited by 832
Compressive strength and microstructural characteristics of class C fly ash geopolymer
Guo, X., Shi, H., & Dick, W. A. (2010) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2009.11.003 · Cited by 820
Kumar, S., Kumar, R., & Mehrotra, S. P. (2010) · Journal of Materials Science · doi:10.1007/s10853-009-3934-5 · Cited by 807
Lee, N. K., & Lee, H. K. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.05.107 · Cited by 754
Role of slag in microstructural development and hardening of fly ash-slag geopolymer
Puligilla, S., & Mondal, P. (2012) · Cement and Concrete Research · doi:10.1016/j.cemconres.2012.10.004 · Cited by 624
Durability of alkali-activated fly ash cementitious materials
Fernandez-Jimenez, A., García-Lodeiro, I., & Palomo, A. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0584-8 · Cited by 593
Nath, P., & Sarker, P. K. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.11.034 · Cited by 574
Engineering properties of inorganic polymer concretes (IPCs)
Sofi, M., van Deventer, J. S. J., Mendis, P. A., & Lukey, G. C. (2007) · Cement and Concrete Research · doi:10.1016/j.cemconres.2006.10.008 · Cited by 522
Durability of alkali-activated binders: A clear advantage over Portland cement or an unproven issue?
Pacheco-Torgal, F., Abdollahnejad, Z., Camões, A. F., Jamshidi, M., & Ding, Y. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2011.12.017 · Cited by 480
Mechanical properties of alkali-activated concrete: A state-of-the-art review
Ding, Y., Dai, J.-G., & Shi, C.-J. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.09.121 · Cited by 448
Rashad, A. M. (2013) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.07.074 · Cited by 388
Variation in hybrid cements over time. Alkaline activation of fly ash–portland cement blends
García-Lodeiro, I., Fernández-Jiménez, A., & Palomo, A. (2013) · Cement and Concrete Research · doi:10.1016/j.cemconres.2013.03.022 · Cited by 385
Saha, S., & Rajasekaran, C. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.04.139 · Cited by 380
Mechanical Properties of Fly-Ash-Based Geopolymer Concrete
(2011) · ACI Materials Journal · doi:10.14359/51682495 · Cited by 377
de Vargas, A. S., Molin, D. C. C. D., Vilela, A. C. F., da Silva, F. J., Pavão, B. B., & Veit, H. M. (2011) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2011.03.006 · Cited by 367
Fresh and hardened properties of alkali-activated fly ash/slag pastes with superplasticizers
Jang, J. G., Lee, N. K., & Lee, H. K. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.09.048 · Cited by 318
Thermal analysis of geopolymer pastes synthesised from five fly ashes of variable composition
Rickard, W. D. A., Temuujin, J., & van Riessen, A. (2012) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2012.05.032 · Cited by 278
Guidelines for mix proportioning of fly ash/GGBS based alkali activated concretes
Rafeet, A., Vinai, R., Soutsos, M., & Sha, W. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.04.036 · Cited by 258
A mix design procedure for low calcium alkali activated fly ash-based concretes
Talha Junaid, M., Kayali, O., Khennane, A., & Black, J. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.01.048 · Cited by 219
Microscopy and microanalysis of inorganic polymer cements. 1: remnant fly ash particles
Lloyd, R. R., Provis, J. L., & van Deventer, J. S. J. (2009) · Journal of Materials Science · doi:10.1007/s10853-008-3077-0 · Cited by 170
Memon, F. A., Nuruddin, M. F., Khan, S. U., Shafiq, N., & Ayub, T. (2013) · DOAJ (DOAJ: Directory of Open Access Journals) · Cited by 170
Activation of fly ash and its effects on cement properties
Fan, Y., Yin, S., Wen, Z., & Zhong, J. (1999) · Cement and Concrete Research · doi:10.1016/s0008-8846(98)00178-1 · Cited by 125
Hou, D., Li, Z., & Zhao, T. (2014) · RSC Advances · doi:10.1039/c4ra10645h · Cited by 118
Effects of Parameters on the Setting Time of Fly Ash Based Geopolymers Using Taguchi Method
Siyal, A. A., Azizli, K. A., Man, Z. B., & Ullah, H. (2016) · Procedia Engineering · doi:10.1016/j.proeng.2016.06.624 · Cited by 117
Magnesia modification of alkali-activated slag fly ash cement
Shen, W., Wang, Y., Zhang, T., Zhou, M., Li, J., & Cui, X. (2011) · Journal of Wuhan University of Technology-Mater Sci Ed · doi:10.1007/s11595-011-0182-8 · Cited by 112
Aspects of the deformational behaviour of alkali activated fly ash concrete at elevated temperatures
Junaid, M. T., Khennane, A., Kayali, O., Sadaoui, A., Picard, D., & Fafard, M. (2014) · Cement and Concrete Research · doi:10.1016/j.cemconres.2014.01.026 · Cited by 88
Junaid, M. T., Kayali, O., & Khennane, A. (2016) · Materials and Structures · doi:10.1617/s11527-016-0877-6 · Cited by 83
Wan, X., Hou, D., Zhao, T., & Wang, L. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.02.049 · Cited by 57
Junaid, M. T., Khennane, A., & Kayali, O. (2014) · Materials and Structures · doi:10.1617/s11527-014-0404-6 · Cited by 50
Cited by
Fiber-reinforced geopolymer composites: A review
Ranjbar, N., & Zhang, M. (2020) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2019.103498 · Cited by 651
Self-citationde Brito, J., & Kurda, R. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.123558 · Cited by 436
A review: Reaction mechanism and strength of slag and fly ash-based alkali-activated materials
Sun, B., Ye, G., & de Schutter, G. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.126843 · Cited by 386
Zhao, J., Tong, L., Li, B., Chen, T., Wang, C., Yang, G., & Zheng, Y. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.127085 · Cited by 369
Multiscale micromechanical analysis of alkali-activated fly ash-slag paste
Fang, G., & Zhang, M. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106141 · Cited by 292
Self-citation
Metadata
- Authors
- Fang, G., Ho, W. K., Tu, W., & Zhang, M.
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2018-05
- Volume
- 172
- Pages
- 476-487
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W2796115024
- Cited by
- 528
- References
- 41
- FWCI
- 30.76
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.