The DOI matches its Crossref record.
Structural behaviors of ultra-high performance engineered cementitious composites (UHP-ECC) beams subjected to bending-experimental study
Abstract
Abstract The structural behaviors of steel reinforced ultra-high performance engineered cementitious composites (UHP-ECC) beams under bending were experimentally explored and compared to the ordinary reinforced concrete (RC) beams in present research. Two series of beams, reinforced or unreinforced with stirrups, were prepared to study the flexural and shear performance of steel reinforced UHP-ECC (RU) beams. The UHP-ECC was featured with the tensile strength of 16 MPa and the tensile strain capacity around 8%. The steel reinforcement ratios of longitudinal bar for both RU and RC beams were 0.69%, 1.86% and 2.94%, respectively. The crack propagation and the failure mode of RU and RC beams were monitored by digital image correlation (DIC) method. Additionally, the load-displacement relationships, the ductility index values and the component strains including steel bar and UHP-ECC of RU beams were obtained and compared with RC beams. It was found that the RU beams showed superior performance in both load capacity and ductility at the ultimate limit state; while the crack width and deflection at the serviceability limit state of RU beams were much smaller than those of RC beams. The loading capacity of non-steel reinforced UHP-ECC (NU) beams was approaching to the one of RC beams with reinforcement ratio of 1.86%, which indicated the feasibility of utilizing the UHP-ECC to substantially reduce or replace the steel bar in structural members.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Anisotropic behavior in bending of 3D printed concrete reinforced with fibers
Ding, T., Xiao, J., Zou, S., & Zhou, X. (2020) · Composite Structures · doi:10.1016/j.compstruct.2020.112808 · Cited by 296
Yu, K.-Q., Zhu, W.-J., Ding, Y., Lu, Z.-D., Yu, J.-T., & Xiao, J.-Z. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.105813 · Cited by 295
Self-citationGuo, P., Meng, W., Xu, M., Li, V. C., & Bao, Y. (2021) · Materials · doi:10.3390/ma14123143 · Cited by 114
Lao, J.-C., Xu, L.-Y., Huang, B.-T., Zhu, J.-X., Khan, M., & Dai, J.-G. (2023) · Frontiers in Materials · doi:10.3389/fmats.2023.1142237 · Cited by 86
Metadata
- Authors
- Ding, Y., Yu, K.-Q., Yu, J.-T., & Xu, S.-L.
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2018-07
- Volume
- 177
- Pages
- 102-115
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W2803484229
- Cited by
- 184
- References
- 0
- FWCI
- 12.80
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Structural behaviors of ultra-high performance engineered cementitious composites (UHP-ECC) beams subjected to bending-experimental study. https://app.cochat.ai/papers/10.1016/j.conbuildmat.2018.05.122
- The paper
- Ding, Y., Yu, K.-Q., Yu, J.-T., & Xu, S.-L. (2018). Structural behaviors of ultra-high performance engineered cementitious composites (UHP-ECC) beams subjected to bending-experimental study. Construction and Building Materials. https://doi.org/10.1016/j.conbuildmat.2018.05.122
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.