The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
3D-printed steel reinforcement for digital concrete construction – Manufacture, mechanical properties and bond behaviour
Abstract
Abstract Digital concrete construction has recently become the subject of very rapidly growing research activities all over the world. Various technologies involving 3D-printing with concrete have been developed, and the number of demonstration projects and practical applications has been increasing exponentially. Most of these approaches are focused on the placement of concrete, while the suggested solutions for incorporation of reinforcement are still rudimentary, and as such they lag behind the concepts for printing concrete. Since the use of (steel) reinforcement is mandatory in most structural applications, there is an urgent need to bring the technology of reinforcing 3D-printed structural elements forward. The article starts with a brief overview of the existing approaches in using reinforcement in digital concrete construction. Then the authors’ own research work is presented, namely a feasibility study on 3D-printing of steel reinforcement using gas-metal arc welding. A description of the newly developed 3D-printing process is followed by a demonstration of its feasibility in producing vertical steel reinforcement bars with and without extra ribs. The mechanical performance of the printed bars was investigated by means of uniaxial tension tests. The samples exhibited comparable mechanical properties to common steel reinforcement of the same diameter. The investigation of fracture surfaces confirmed a ductile mode of failure of the printed steel bars. Finally, the bond between printed steel bars and printable fine-grained concrete was tested by means of pull-out experiments. Here the overall performance could be rated as satisfactory, even though it could be improved by introducing extra ribs in the process of bar manufacturing.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ding, D., Pan, Z., Cuiuri, D., & Li, H. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7077-3 · Cited by 1,648
Mix design and fresh properties for high-performance printing concrete
Le, T. T., Austin, S. A., Lim, S., Buswell, R. A., Gibb, A. G. F., & Thorpe, T. (2012) · Materials and Structures · doi:10.1617/s11527-012-9828-z · Cited by 1,218
Automated construction by contour crafting—related robotics and information technologies
Khoshnevis, B. (2004) · Automation in Construction · doi:10.1016/j.autcon.2003.08.012 · Cited by 1,161
Mechanical properties of high-strength steel fiber-reinforced concrete
Song, P. S., & Hwang, S. (2004) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2004.04.027 · Cited by 1,004
Fiber-reinforced concrete: an overview after 30 years of development
Zollo, R. F. (1997) · Cement and Concrete Composites · doi:10.1016/s0958-9465(96)00046-7 · Cited by 802
Mega-scale fabrication by Contour Crafting
Khoshnevis, B., Hwang, D., Yao, K. T., & Yeh, Z. (2006) · International Journal of Industrial and Systems Engineering · doi:10.1504/ijise.2006.009791 · Cited by 378
Development of a Viable Concrete Printing Process
Lim, S., Buswell, R., Le, T., Wackrow, R., Austin, S., Gibb, A., & Thorpe, T. (2011) · Proceedings of the International Symposium on Automation and Robotics in Construction (IAARC) · doi:10.22260/isarc2011/0124 · Cited by 192
3‐D‐Druck mit Beton: Sachstand, Entwicklungstendenzen, Herausforderungen
Mechtcherine, V., & Nerella, V. N. (2018) · Bautechnik · doi:10.1002/bate.201800001 · Cited by 40
Self-citation
Cited by
Paolini, A., Kollmannsberger, S., & Rank, E. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.100894 · Cited by 673
Wangler, T., Roussel, N., Bos, F. P., Salet, T. A. M., & Flatt, R. J. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.105780 · Cited by 612
Large-scale 3D printing concrete technology: Current status and future opportunities
Xiao, J., Ji, G., Zhang, Y., Ma, G., Mechtcherine, V., Pan, J., Wang, L., Ding, T., Duan, Z., & Du, S. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2021.104115 · Cited by 532
Self-citationCraveiro, F., Duarte, J. P., Bartolo, H., & Bartolo, P. J. (2019) · Automation in Construction · doi:10.1016/j.autcon.2019.03.011 · Cited by 455
Large-scale digital concrete construction – CONPrint3D concept for on-site, monolithic 3D-printing
Mechtcherine, V., Nerella, V. N., Will, F., Näther, M., Otto, J., & Krause, M. (2019) · Automation in Construction · doi:10.1016/j.autcon.2019.102933 · Cited by 455
Self-citation
Metadata
- Authors
- Mechtcherine, V., Grafe, J., Nerella, V. N., Spaniol, E., Hertel, M., & Füssel, U.
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2018-08
- Volume
- 179
- Pages
- 125-137
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W2807049491
- Cited by
- 332
- References
- 8
- FWCI
- 19.95
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.