The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Mechanical properties, microstructure and drying shrinkage of hybrid fly ash-basalt fiber geopolymer paste
Abstract
This paper evaluates the mechanical properties, microstructure and drying shrinkage of hybrid fly ash-basalt fiber geopolymer paste. Fly ash was replaced with basalt fiber at the replacement levels of 0, 10, 20, 30, 40 and 100%. Na2SiO3/NaOH ratio of 1.0 and liquid to binder (L/B) ratio of 0.60 were used for making geopolymer pastes. Setting time, strength and drying shrinkage of geopolymer pastes were tested. The results showed that the replacement of fly ash with basalt fibers in geopolymer pastes resulted in increased setting times and strength and reduced drying shrinkage of paste. The basalt fiber acted as small reinforcing fibers and enhanced the development of CSH, CASH and NASH which further enhanced the properties of paste. In addition, the total porosity and critical pore size of fly ash geopolymer paste reduce with increasing replacement content in fly ash which makes the paste more homogeneous and dense compared to fly ash geopolymer.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Phummiphan, I., Horpibulsuk, S., Rachan, R., Arulrajah, A., Shen, S.-L., & Chindaprasirt, P. (2018) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2017.07.067 · Cited by 332
Self-citation
Cited by
Advances in geopolymer materials: A comprehensive review
Cong, P., & Cheng, Y. (2021) · Journal of Traffic and Transportation Engineering (English Edition) · doi:10.1016/j.jtte.2021.03.004 · Cited by 481
Recent advances in basalt-fiber-reinforced composites: Tailoring the fiber-matrix interface
Khandelwal, S., & Rhee, K. Y. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2020.108011 · Cited by 375
Fresh, mechanical, and durability properties of basalt fiber-reinforced concrete (BFRC): A review
Al-Rousan, E. T., Khalid, H. R., & Rahman, M. K. (2023) · Developments in the Built Environment · doi:10.1016/j.dibe.2023.100155 · Cited by 148
Metadata
- Authors
- Punurai, W., Kroehong, W., Saptamongkol, A., & Chindaprasirt, P.
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2018-10
- Volume
- 186
- Pages
- 62-70
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W2883614666
- Cited by
- 189
- References
- 1
- FWCI
- 10.33
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.