The DOI matches its Crossref record; 183 of the 183 references it cites were found in a registry or an index.
Advances in geopolymer materials: A comprehensive review
Open accessAbstract
Geopolymer is a new environment-friendly cementitious material, and the development of geopolymer can reduce the carbon dioxide emission caused by the development of cement industry. Geopolymer materials not only have excellent mechanical properties, but also have a series of excellent properties such as fire resistance and corrosion resistance. Most industrial solid waste and waste incineration bottom ash are piled up at will, which not only occupies land resources, but also has a bad impact on the environment. Recycling them can be used as raw materials for preparing geopolymers. Geopolymer materials can effectively adsorb heavy metals, dyes, and other radioactive pollution, which is very beneficial to society's future development. However, due to the excellent properties of geopolymer materials, its application goes beyond that. Some useful information about geopolymer materials was introduced in this paper. The paper included the geopolymerization, the source of raw materials, the types of activators, the preparation methods, and the different application fields of geopolymer materials. The factors affecting the fresh properties and mechanical properties of geopolymer materials were discussed. In this paper, the shortcomings and application limitations of geopolymer materials were summarized, and their progress was summarized to lay a theoretical foundation for the long-term development of geopolymer materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Geopolymer technology: The current state of the art
Duxson, P., Fernández-Jiménez, A., Provis, J. L., Lukey, G. C., Palomo, A., & van Deventer, J. S. J. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0637-z · Cited by 4,742
Scrivener, K. L., John, V. M., & Gartner, E. M. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.03.015 · Cited by 3,620
Palomo, A., Grutzeck, M. W., & Blanco, M. T. (1999) · Cement and Concrete Research · doi:10.1016/s0008-8846(98)00243-9 · Cited by 2,319
Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement
McLellan, B. C., Williams, R. P., Lay, J., van Riessen, A., & Corder, G. D. (2011) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.02.010 · Cited by 1,949
Geopolymer concrete: A review of some recent developments
Singh, B., Ishwarya, G., Gupta, M., & Bhattacharyya, S. K. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.03.036 · Cited by 1,484
Alkali-Activated Cements and Concretes
Shi, C., Krivenko, P. V., & Roy, D. (2006) · Taylor & Francis eBooks · doi:10.4324/9780203390672 · Cited by 1,164
Kinetics of geopolymerization: Role of Al2O3 and SiO2
Silva, P. D., Sagoe-Crenstil, K., & Sirivivatnanon, V. (2007) · Cement and Concrete Research · doi:10.1016/j.cemconres.2007.01.003 · Cited by 916
Alkali Activated Materials: State-of-the-Art Report, RILEM TC 224-AAM
(2014) · RILEM State-of-the-Art Reports · doi:10.1007/978-94-007-7672-2 · Cited by 906
Clean production and properties of geopolymer concrete; A review
Amran, Y. H. M., Alyousef, R., Alabduljabbar, H., & El-Zeadani, M. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.119679 · Cited by 901
Fire-resistant geopolymer produced by granulated blast furnace slag
Cheng, T. W., & Chiu, J. P. (2003) · Minerals Engineering · doi:10.1016/s0892-6875(03)00008-6 · Cited by 833
Metadata
- Authors
- Cong, P., & Cheng, Y.
- Venue
- Journal of Traffic and Transportation Engineering (English Edition)
- Publisher
- Elsevier BV
- Published
- 2021-06
- Volume
- 8
- Issue
- 3
- Pages
- 283-314
- ISSN
- 2095-7564 (ISSN-L)
- OpenAlex
- W3165192547
- Cited by
- 481
- References
- 183
- FWCI
- 40.15
- Type
- journal article
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Advances in geopolymer materials: A comprehensive review. https://app.cochat.ai/papers/10.1016/j.jtte.2021.03.004
- The paper
- Cong, P., & Cheng, Y. (2021). Advances in geopolymer materials: A comprehensive review. Journal of Traffic and Transportation Engineering (English Edition). https://doi.org/10.1016/j.jtte.2021.03.004
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.