The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
Preparation and characterization of coal gangue geopolymers
Abstract
This paper explores the impacts of sodium hydroxide modulus, alkali lye amount and liquid–solid ratio on the strength and microstructure of coal gangue geopolymer materials, involving a total of five sodium hydroxide moduli, four NH/NS mass ratios and seven liquid–solid ratios. To characterize the morphology and structure of coal gangue geopolymer materials, we carried out XRD, TG-DTG, FT-IR and SEM analysis on the specimens respectively. The results show that NH concentration has no impact on paste fluidity and has significant impact on compressive strength of geopolymers. Both paste fluidity and compressive strength of geopolymers increase with the increase in liquid–solid ratio. However, it should be noted that the compressive strength decreases with the increase in liquid–solid ratio when the liquid–solid ratio is greater than 0.32. The optimal NH/NS mass ratio is 1:1.5 ∼ 1:2. In comparison with P.O42.5 cement specimens, coal gangue geopolymers have higher initial strength and lower 28 d compressive strength. The analytical results of microstructure are consistent with those of compressive strength, which demonstrates that the polymerization products of coal gangue geopolymers are N-A-S-H gels and some other aluminosilicate zeolite crystals.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Geopolymers: Inorganic polymeric new materials
Davidovits, J. (1991) · Journal of Thermal Analysis · doi:10.1007/bf01912193 · Cited by 4,251
Duxson, P., Provis, J. L., Lukey, G. C., Mallicoat, S. W., Kriven, W. M., & van Deventer, J. S. J. (2005) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2005.06.060 · Cited by 1,807
Structure of Calcium Silicate Hydrate (C‐S‐H): Near‐, Mid‐, and Far‐Infrared Spectroscopy
Yu, P., Kirkpatrick, R. J., Poe, B., McMillan, P. F., & Cong, X. (1999) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1999.tb01826.x · Cited by 1,640
Ismail, I., Bernal, S. A., Provis, J. L., San Nicolas, R., Hamdan, S., & van Deventer, J. S. J. (2014) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2013.09.006 · Cited by 1,317
Geopolymers and geopolymeric materials
Davidovits, J. (1989) · Journal of Thermal Analysis · doi:10.1007/bf01904446 · Cited by 1,148
Synthesis and characterization of red mud and rice husk ash-based geopolymer composites
He, J., Jie, Y., Zhang, J., Yu, Y., & Zhang, G. (2013) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2012.11.010 · Cited by 770
Mid-infrared spectroscopic studies of alkali-activated fly ash structure
Fernández-Jiménez, A., & Palomo, A. (2005) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2005.05.057 · Cited by 625
Role of water in the synthesis of calcined kaolin-based geopolymer
ZUHUA, Z., XIAO, Y., HUAJUN, Z., & YUE, C. (2009) · Applied Clay Science · doi:10.1016/j.clay.2008.09.003 · Cited by 621
The effects of inorganic salt contamination on the strength and durability of geopolymers
Lee, W. K. W., & van Deventer, J. S. J. (2002) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/s0927-7757(02)00239-x · Cited by 479
Durability of alkali-activated materials in aggressive environments: A review on recent studies
Zhang, J., Shi, C., Zhang, Z., & Ou, Z. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.07.027 · Cited by 374
Cited by
Preparation and Reaction Mechanism Characterization of Alkali-activated Coal Gangue–Slag Materials
Ma, H., Zhu, H., Yi, C., Fan, J., Chen, H., Xu, X., & Wang, T. (2019) · Materials · doi:10.3390/ma12142250 · Cited by 91
Self-citationSekhohola-Dlamini, L. M., Keshinro, O. M., Masudi, W. L., & Cowan, A. K. (2022) · Minerals · doi:10.3390/min12020111 · Cited by 29
Metadata
- Authors
- Cheng, Y., Hongqiang, M., Hongyu, C., Jiaxin, W., Jing, S., Zonghui, L., & Mingkai, Y.
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2018-10
- Volume
- 187
- Pages
- 318-326
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W2885928981
- Cited by
- 259
- References
- 28
- FWCI
- 13.02
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Preparation and characterization of coal gangue geopolymers. https://app.cochat.ai/papers/10.1016/j.conbuildmat.2018.07.220
- The paper
- Cheng, Y., Hongqiang, M., Hongyu, C., Jiaxin, W., Jing, S., Zonghui, L., & Mingkai, Y. (2018). Preparation and characterization of coal gangue geopolymers. Construction and Building Materials. https://doi.org/10.1016/j.conbuildmat.2018.07.220
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.