The DOI matches its Crossref record.
High-temperature behavior and mechanical characteristics of boron waste additive metakaolin based geopolymer composites reinforced with synthetic fibers
Abstract
This paper aims to examine high-temperature behavior and some mechanical and microstructural characteristics of boron waste additive metakaolin based geopolymer mortar composites reinforced with four various fiber types. Synthetic fibers (polyolefin, basalt, modified polyamide and polyvinyl alcohol) were used to evaluate their addition effect on the geopolymer composites behavior. Some experimental tests were performed such as compressive strength, flexural strength, toughness, abrasion resistance and high-temperature exposure to determine the influence of the fibers to be added on the properties of metakaolin based geopolymer mortars. Geopolymer mixtures were prepared by a combination of boron waste and metakaolin activated by sodium hydroxide and sodium silicate solutions and then heat cure was done. Experimental test results indicated that the addition of various types of fibers improved the strength characteristics of the geopolymer composites, for instance, PVA fiber samples yielded a flexural toughness improvement of 415.58% with respect to control sample. Concerning abrasion resistance, all of the manufactured samples showed a length change of less than 2 mm and a weight loss of less than 15 g. The use of synthetic fibers positively affected high-temperature behavior of metakaolin based geopolymer composites in terms of strength loss, weight loss and UPV loss. The microstructural analysis revealed an acceptable degree of bonding between synthetic fibers and geopolymeric matrix.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Geopolymers in construction - recent developments
Nawaz, M., Heitor, A., & Sivakumar, M. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.120472 · Cited by 268
Shi, D., Yao, Y., Ye, J., & Zhang, W. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.03.288 · Cited by 65
Öz, A., Bayrak, B., Kavaz, E., Kaplan, G., Çelebi, O., Alcan, H. G., & Aydın, A. C. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.127923 · Cited by 55
Metadata
- Authors
- Celik, A., Yilmaz, K., Canpolat, O., Al-mashhadani, M. M., Aygörmez, Y., & Uysal, M.
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2018-10
- Volume
- 187
- Pages
- 1190-1203
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W2885597838
- Cited by
- 196
- References
- 0
- FWCI
- 12.12
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.