The radiation shielding and microstructure properties of quartzic and metakaolin based geopolymer concrete

Alkali-activated materials

Provis, J. L. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.02.009 · Cited by 2,272 · see citing works

The geopolymerisation of alumino-silicate minerals

Xu, H., & Deventer, J. S. J. V. (2000) · International Journal of Mineral Processing · doi:10.1016/s0301-7516(99)00074-5 · Cited by 1,893 · see citing works

An environmental evaluation of geopolymer based concrete production: reviewing current research trends

Habert, G., de Lacaillerie, J.-B. D., & Roussel, N. (2011) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.03.012 · Cited by 1,420 · see citing works

Metakaolin and calcined clays as pozzolans for concrete: a review

Sabir, B. B., Wild, S., & Bai, J. (2001) · Cement and Concrete Composites · doi:10.1016/s0958-9465(00)00092-5 · Cited by 1,374 · see citing works

NaOH-activated ground fly ash geopolymer cured at ambient temperature

Somna, K., Jaturapitakkul, C., Kajitvichyanukul, P., & Chindaprasirt, P. (2011) · Fuel · doi:10.1016/j.fuel.2011.01.018 · Cited by 998 · see citing works

Kinetics of geopolymerization: Role of Al2O3 and SiO2

Silva, P. D., Sagoe-Crenstil, K., & Sirivivatnanon, V. (2007) · Cement and Concrete Research · doi:10.1016/j.cemconres.2007.01.003 · Cited by 923 · see citing works

The effect of composition and temperature on the properties of fly ash- and kaolinite-based geopolymers

Jaarsveld, J. G. S. V., van Deventer, J. S. J., & Lukey, G. C. (2002) · Chemical Engineering Journal · doi:10.1016/s1385-8947(02)00025-6 · Cited by 905 · see citing works

Do Geopolymers Actually Contain Nanocrystalline Zeolites? A Reexamination of Existing Results

Provis, J. L., Lukey, G. C., & van Deventer, J. S. J. (2005) · Chemistry of Materials · doi:10.1021/cm050230i · Cited by 824 · see citing works

Recent progress in low-carbon binders

Shi, C., Qu, B., & Provis, J. L. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.05.009 · Cited by 718 · see citing works

The heavy metal adsorption characteristics on metakaolin-based geopolymer

Cheng, T., Lee, M. L., Ko, M. S., Ueng, T. H., & Yang, S. (2012) · Applied Clay Science · doi:10.1016/j.clay.2011.11.027 · Cited by 458 · see citing works

Influence of silica fume content on microstructure development and bond to steel fiber in ultra-high strength cement-based materials (UHSC)

Wu, Z., Shi, C., & Khayat, K. H. (2016) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2016.05.005 · Cited by 435 · see citing works

The characterisation of source materials in fly ash-based geopolymers

van Jaarsveld, J. G. S., van Deventer, J. S. J., & Lukey, G. C. (2003) · Materials Letters · doi:10.1016/s0167-577x(02)00971-0 · Cited by 416 · see citing works

Effect of Curing Temperature and Silicate Concentration on Fly-Ash-Based Geopolymerization

Sindhunata, van Deventer, J. S. J., Lukey, G. C., & Xu, H. (2006) · Industrial & Engineering Chemistry Research · doi:10.1021/ie051251p · Cited by 390 · see citing works

The effects of Na2O/SiO2molar ratio, curing temperature and age on compressive strength, morphology and microstructure of alkali-activated fly ash-based geopolymers

de Vargas, A. S., Molin, D. C. C. D., Vilela, A. C. F., da Silva, F. J., Pavão, B. B., & Veit, H. M. (2011) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2011.03.006 · Cited by 367 · see citing works

Very high strength (120 MPa) class F fly ash geopolymer mortar activated at different NaOH amount, heat curing temperature and heat curing duration

Atiş, C. D., GÖRÜR, E. B., Karahan, O., Bilim, C., İlkentapar, S., & Luga, E. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.08.089 · Cited by 330 · see citing works

Composition design and microstructural characterization of calcined kaolin-based geopolymer cement

Yunsheng, Z., Wei, S., & Li, Z. (2009) · Applied Clay Science · doi:10.1016/j.clay.2009.11.002 · Cited by 317 · see citing works

The development of compressive strength of ground granulated blast furnace slag-palm oil fuel ash-fly ash based geopolymer mortar

Islam, A. B. M. S., Alengaram, U. J., Jumaat, M. Z., & Bashar, I. I. (2013) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.11.080 · Cited by 298 · see citing works

Mechanical and microstructural characterization of fiber reinforced fly ash based geopolymer composites

AL-MASHHADANI, M. M. M., Canpolat, O., Aygörmez, Y., Uysal, M., & Erdem, S. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.02.061 · Cited by 288 · see citing works

One‐Part Geopolymers Based on Thermally Treated Red Mud/NaOH Blends

Ke, X., Bernal, S. A., Ye, N., Provis, J. L., & Yang, J. (2014) · Journal of the American Ceramic Society · doi:10.1111/jace.13231 · Cited by 284 · see citing works

Preparation and Properties of Alkali Activated Metakaolin-Based Geopolymer

Chen, L., Wang, Z., Wang, Y., & Feng, J. (2016) · Materials · doi:10.3390/ma9090767 · Cited by 266 · see citing works

EpiXS: A Windows-based program for photon attenuation, dosimetry and shielding based on EPICS2017 (ENDF/B-VIII) and EPDL97 (ENDF/B-VI.8)

Hila, F. C., Asuncion-Astronomo, A. J., Dingle, C. A. M., Jecong, J. F. M., Javier-Hila, A. M. V., Gili, M. B. Z., Balderas, C. V., Lopez, G. E. P., Guillermo, N. R. D., & Amorsolo, A. V. (2021) · Radiation Physics and Chemistry · doi:10.1016/j.radphyschem.2020.109331 · Cited by 266 · see citing works

Physical and mechanical properties of styrene–butadiene rubber emulsion modified cement mortars

Wang, R., Wang, P., & Li, X. (2004) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.07.012 · Cited by 259 · see citing works

Compressive stress-strain model for low-calcium fly ash-based geopolymer and heat-cured Portland cement concrete

Noushini, A., Aslani, F., Castel, A., Gilbert, R. I., Uy, B., & Foster, S. J. (2016) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2016.07.004 · Cited by 257 · see citing works

Chemical deformation of metakaolin based geopolymer

Li, Z., Zhang, S., Zuo, Y., Chen, W., & Ye, G. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.03.017 · Cited by 249 · see citing works

Effect of high temperature or fire on heavy weight concrete properties

Sakr, K., & El-Hakim, E. H. (2004) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.05.023 · Cited by 240 · see citing works

Synthesis factors affecting mechanical properties, microstructure, and chemical composition of red mud–fly ash based geopolymers

Zhang, M., El‐Korchi, T., Zhang, G., Liang, J., & Tao, M. (2014) · Fuel · doi:10.1016/j.fuel.2014.05.058 · Cited by 226 · see citing works

Structural characterization of C–S–H and C–A–S–H samples—Part II: Local environment investigated by spectroscopic analyses

Guillaume Renaudin, A., Russias, J., Leroux, F., Coumes, C. C. D., & Frizon, F. (2009) · Journal of Solid State Chemistry · doi:10.1016/j.jssc.2009.09.024 · Cited by 218 · see citing works

High-temperature behavior and mechanical characteristics of boron waste additive metakaolin based geopolymer composites reinforced with synthetic fibers

Çelik, A., Yılmaz, K., Canpolat, O., AL-MASHHADANI, M. M. M., Aygörmez, Y., & Uysal, M. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.08.062 · Cited by 197 · see citing works

Mechanical property, nanopore structure and drying shrinkage of metakaolin-based geopolymer with waste glass powder

Si, R., Dai, Q., Guo, S., & Wang, J. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.118502 · Cited by 193 · see citing works

Influence of partial replacement of fly ash by metakaolin on mechanical properties and microstructure of fly ash geopolymer paste exposed to sulfate attack

Duan, P., Yan, C., & Zhou, W. (2015) · Ceramics International · doi:10.1016/j.ceramint.2015.10.154 · Cited by 191 · see citing works

Photon interaction and energy absorption in glass: A transparent gamma ray shield

Manohara, S. R., Hanagodimath, S. M., & Gerward, L. (2009) · Journal of Nuclear Materials · doi:10.1016/j.jnucmat.2009.07.001 · Cited by 181 · see citing works

High tensile strength fly ash based geopolymer composite using copper coated micro steel fiber

Ranjbar, N., Mehrali, M., Mehrali, M., Alengaram, U. J., & Jumaat, M. Z. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.02.228 · Cited by 174 · see citing works

Alkali-activated and geopolymer materials developed using innovative manufacturing techniques: A critical review

Gökçe, H. S., Tuyan, M., & Nehdi, M. L. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.124483 · Cited by 167 · see citing works

Assessment of important parameters involved in the synthesis of geopolymer composites: A review

Farhan, K. Z., Johari, M. A. M., & Demirboğa, R. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.120276 · Cited by 160 · see citing works

Variation of energy absorption and exposure buildup factors with incident photon energy and penetration depth for boro-tellurite (B2O3-TeO2) glasses

Sayyed, M. I., & Elhouichet, H. (2016) · Radiation Physics and Chemistry · doi:10.1016/j.radphyschem.2016.09.019 · Cited by 157 · see citing works

An experimental study on the investigation of nuclear radiation shielding characteristics in iron-boron alloys

Levet, A., Kavaz, E., & Özdemır, Y. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.152946 · Cited by 156 · see citing works

Gamma ray and neutron shielding characteristics of polypropylene fiber-reinforced heavyweight concrete exposed to high temperatures

Demi̇r, İ., Gümüş, M., & Gökçe, H. S. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.119596 · Cited by 150 · see citing works

Properties of NaOH activated geopolymer with marble, travertine and volcanic tuff wastes

Tekin, İ. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.10.038 · Cited by 147 · see citing works

Mechanical properties of GGBFS-based geopolymer concrete incorporating natural zeolite and silica fume with an optimum design using response surface method

Shahmansouri, A. A., Nematzadeh, M., & Behnood, A. (2021) · Journal of Building Engineering · doi:10.1016/j.jobe.2020.102138 · Cited by 146 · see citing works

High-density concrete: Exploring Ferro boron effects in neutron and gamma radiation shielding

Roslan, M. K. A., Ismail, M., Kueh, A. B. H., & Zin, M. R. M. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.04.105 · Cited by 135 · see citing works

Mechanical and durability properties of metakaolin blended with slag geopolymer mortars used for pavement repair

Chen, K., Wu, D., Yi, M., Cai, Q., & Zhang, Z. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.122566 · Cited by 131 · see citing works

Self-healing of Engineered Geopolymer Composites prepared by fly ash and metakaolin

Kan, L., Lv, J.-W., Duan, B.-B., & Wu, M. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.105895 · Cited by 129 · see citing works

Partial replacement of metakaolin with red ceramic waste in geopolymer

Sarkar, M., & Dana, K. (2020) · Ceramics International · doi:10.1016/j.ceramint.2020.09.191 · Cited by 124 · see citing works

Investigation of the waterproof property of alkali-activated metakaolin geopolymer added with rice husk ash

Liang, G., Zhu, H., Zhang, Z., Wu, Q., & Du, J. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.05.111 · Cited by 118 · see citing works

Influence of wetting-drying curing system on the performance of fiber reinforced metakaolin-based geopolymer composites

Arslan, A. A., Uysal, M., Yilmaz, A., AL-MASHHADANI, M. M. M., Canpolat, O., Şahin, F., & Aygörmez, Y. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.07.235 · Cited by 115 · see citing works

An experimental study on gamma ray shielding features of lithium borate glasses doped with dolomite, hematite and goethite minerals

Kavaz, E. (2019) · Radiation Physics and Chemistry · doi:10.1016/j.radphyschem.2019.03.032 · Cited by 114 · see citing works

The effect of curing regimes on physico-mechanical, microstructural and durability properties of alkali-activated materials: A review

Nodehi, M., Ozbakkaloglu, T., Gholampour, A., Mohammed, T., & Shi, X. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.126335 · Cited by 113 · see citing works

Impact of process parameters of resistance spot welding on mechanical properties and micro hardness of stainless steel 304 weldments

Kumar, R., Chohan, J. S., Goyal, R., & Chauhan, P. (2020) · International Journal of Structural Integrity · doi:10.1108/ijsi-03-2020-0031 · Cited by 111 · see citing works

Synthesis and characterization of geopolymer from metakaolin and sugarcane bagasse ash

Yadav, A. L., Sairam, V., Srinivasan, K., & Muruganandam, L. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.119231 · Cited by 111 · see citing works

Performance, radiation shielding, and anti-fungal activity of alkali-activated slag individually modified with zinc oxide and zinc ferrite nano-particles

Mohsen, A., Abdel‐Gawwad, H. A., & Ramadan, M. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.119584 · Cited by 106 · see citing works

Development of normal and very high strength geopolymer binders based on concrete waste at ambient environment

Mahmoodi, O., Siad, H., Lachemi, M., Dadsetan, S., & Şahmaran, M. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.123436 · Cited by 105 · see citing works

Optimization of lightweight GGBFS and FA geopolymer mortars by response surface method

Mermerdaş, K., Alğın, Z., Oleiwi, S. M., & Nassani, D. E. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.02.050 · Cited by 100 · see citing works

Effects of Na/Al ratio on mechanical properties and microstructure of red mud-coal metakaolin geopolymer

Liu, J., Li, X., Lu, Y., & Bai, X. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.120653 · Cited by 98 · see citing works

Suitability of mortars produced using laterite and ceramic wastes: Mechanical and microscale analysis

Awoyera, P. O., Dawson, A. R., Thom, N. H., & Akinmusuru, J. O. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.05.031 · Cited by 94 · see citing works

Physical, mechanical, and radiation attenuation properties of serpentine concrete containing boric acid

Zayed, A. M., Masoud, M. A., Shahien, M. G., Gökçe, H. S., Sakr, K., Kansouh, W. A., & El-Khayatt, A. M. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.121641 · Cited by 93 · see citing works

Radiation shielding performance of heavy-weight concrete mixtures

Azeez, M. O., Ahmad, S., Al-Dulaijan, S. U., Maslehuddin, M., & Naqvi, A. A. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.07.077 · Cited by 92 · see citing works

Potassium alkali concentration and heat treatment affected metakaolin-based geopolymer

Tippayasam, C., Balyore, P., Thavorniti, P., Kamseu, E., Leonelli, C., Chindaprasirt, P., & Chaysuwan, D. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.11.027 · Cited by 90 · see citing works

Effect of addition of molybdenum on photon and fast neutron radiation shielding properties in ceramics

Oto, B., Kavaz, E., Durak, H., Aras, A., & Madak, Z. (2019) · Ceramics International · doi:10.1016/j.ceramint.2019.08.082 · Cited by 90 · see citing works

SnO-reinforced silicate glasses and utilization in gamma-radiation-shielding applications

Rammah, Y. S., Kumar, A., Mahmoud, K. A.-A., El‐Mallawany, R., El-Agawany, F. I., Susoy, G., & Tekin, H. O. (2020) · Emerging Materials Research · doi:10.1680/jemmr.20.00150 · Cited by 90 · see citing works

Meta-halloysite to improve compactness in iron-rich laterite-based alkali activated materials

Kaze, C. R., Venyité, P., Nana, A., Nemaleu, J. G. D., Tchakouté, H. K., Rahier, H., Kamseu, E., Melo, U. C., & Leonelli, C. (2019) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2019.122268 · Cited by 84 · see citing works

Preparation, structure and properties of hybrid materials based on geopolymers and polysiloxanes

Roviello, G., Menna, C., Tarallo, O., Ricciotti, L., Ferone, C., Colangelo, F., Asprone, D., Maggio, R. D., Cappelletto, E., Prota, A., et al. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.08.006 · Cited by 82 · see citing works

Recycling and utilization assessment of steel slag in metakaolin based geopolymer from steel slag by-product to green geopolymer

Zhu, X., Li, W., Du, Z. F., Zhou, S., Zhang, Y., & Li, F. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.124654 · Cited by 81 · see citing works

Influence of heat curing period and temperature on the strength of silico-manganese fume-blast furnace slag-based alkali-activated mortar

Nasir, M., Johari, M. A. M., Maslehuddin, M., Yusuf, M. O., & Al-Harthi, M. A. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.118961 · Cited by 76 · see citing works

Effect of borate concentration on solidification of radioactive wastes by different cements

Sun, Q., Li, J., & Wang, J. (2011) · Nuclear Engineering and Design · doi:10.1016/j.nucengdes.2011.08.040 · Cited by 73 · see citing works

Ultra high performance and high strength geopolymer concrete

Nodehi, M., & Aguayo, F. M. (2021) · Journal of Building Pathology and Rehabilitation · doi:10.1007/s41024-021-00130-5 · Cited by 73 · see citing works

Influence of duration of heat curing and extra rest period after heat curing on the strength and transport characteristic of alkali activated class F fly ash geopolymer mortar

İlkentapar, S., Atiş, C. D., Karahan, O., & AVŞAROĞLU, E. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.06.041 · Cited by 72 · see citing works

Role of alkali cation in compressive strength of metakaolin based geopolymers

Zhang, F., Zhang, L., Liu, M., Mu, C., Liang, Y. N., & Hu, X. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.12.034 · Cited by 71 · see citing works

Literature Review of the Effects of Radiation and Temperature on the Aging of Concrete

Fillmore, D. L. (2004) · doi:10.2172/910954 · Cited by 68 · see citing works

Preparation, characterization and rheological analysis of eco-friendly road geopolymer grouting materials based on volcanic ash and metakaolin

Zhou, S., Yang, Z., Zhang, R., & Li, F. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.127822 · Cited by 66 · see citing works

Mix design and mechanical performance of geopolymeric binders and mortars using biomass fly ash and alkaline effluent from paper-pulp industry

Saeli, M., Tobaldi, D. M., Seabra, M. P. D. S., & Labrincha, J. A. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.10.213 · Cited by 65 · see citing works

Synergetic effect of rice husk ash and quartz sand on microstructural and physical properties of laterite clay based geopolymer

Kaze, C. R., Adesina, A., Lecomte‐Nana, G. L., Metekong, J. V. S., Samen, L. V. E. K., Kamseu, E., & Melo, U. C. (2021) · Journal of Building Engineering · doi:10.1016/j.jobe.2021.103229 · Cited by 63 · see citing works

Effect of immersion in water partially alkali-activated materials obtained of tungsten mine waste mud

Silva, I. C. C. E., Castro-Gomes, J. P., & Albuquerque, A. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.02.069 · Cited by 60 · see citing works

Effects of silane on reaction process and microstructure of metakaolin-based geopolymer composites

Zhang, C., Hu, Z., Zhu, H., Wang, X., & Gao, J. (2020) · Journal of Building Engineering · doi:10.1016/j.jobe.2020.101695 · Cited by 60 · see citing works

Waste-polymer incorporated concrete mixes for neutron and gamma radiation shielding

Malkapur, S. M., Ghodke, S. S., Sujatha, P. N., Singh, Y., Shivakumar, K. S., Sen, M., Narasimhan, M. C., & Pulgur, A. (2021) · Progress in Nuclear Energy · doi:10.1016/j.pnucene.2021.103694 · Cited by 58 · see citing works

Benefits of Sealed-Curing on Compressive Strength of Fly Ash-Based Geopolymers

Lee, S., Van Riessen, A., & Chon, C.-M. (2016) · Materials · doi:10.3390/ma9070598 · Cited by 49 · see citing works

Metakaolin-based geopolymer beads: Production methods and characterization

Medri, V., Papa, E., Lizion, J., & Landi, E. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.118844 · Cited by 49 · see citing works

Evaluation of the red mud and quartz sand on reinforced metazeolite-based geopolymer composites

Aygörmez, Y. (2021) · Journal of Building Engineering · doi:10.1016/j.jobe.2021.102528 · Cited by 48 · see citing works

Irradiation Effects on Concrete Structures

Kontani, O., Ichikawa, Y., Ishizawa, A., Takizawa, M., & Sato, O. (2013) · doi:10.1002/9781118536254.ch27 · Cited by 47 · see citing works

Effect of thermal treatment on reactivity and mechanical properties of alkali activated shale–slag binder

Rieger, D., Kovářík, T., Říha, J., Medlín, R., Novotný, P., Bělský, P., Kadlec, J., & Holba, P. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.02.024 · Cited by 43 · see citing works

The effect of cement and aggregate type and w/c ratio on the bound water content and neutron shielding efficiency of concretes

Prochoń, P., & Piotrowski, T. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.120210 · Cited by 43 · see citing works

High-performance heavy concrete as a multi-purpose shield

Mortazavi, S. M. J., Mosleh‐Shirazi, M. A., Roshan-Shomal, P., Raadpey, N., & Baradaran‐Ghahfarokhi, M. (2010) · Radiation Protection Dosimetry · doi:10.1093/rpd/ncq265 · Cited by 39 · see citing works

Experimental Study of Geopolymer Synthesized with Class F Fly Ash and Low-Calcium Slag

Shadnia, R., & Zhang, L. (2017) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0002065 · Cited by 39 · see citing works

The gamma-ray and neutron shielding factors of fly-ash brick materials

Singh, V. P., & Badiger, N. M. (2013) · Journal of Radiological Protection · doi:10.1088/0952-4746/34/1/89 · Cited by 38 · see citing works

Unexplored alternative use of calcareous sludge from the paper-pulp industry in green geopolymer construction materials

Saeli, M., Senff, L., Tobaldi, D. M., Carvalheiras, J., Seabra, M. P. D. S., & Labrincha, J. A. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.118457 · Cited by 30 · see citing works

Effects of curing regimes on the mechanical properties and durability of polymer-modified mortars – an experimental investigation

Parghı, A., & Alam, M. S. (2016) · Journal of Sustainable Cement-Based Materials · doi:10.1080/21650373.2015.1124812 · Cited by 28 · see citing works

Investigating photon interaction characteristics of FexNi1-x alloys

Urtekin, E., Perişanoğlu, U., Demir, L., & Öztürk, A. (2019) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2019.122505 · Cited by 28 · see citing works

Synthesis and characterization of newly developed phosphate-based glasses through experimental gamma-ray and neutron spectroscopy methods: Transmission and dose rates

Kavaz, E., Ersundu, M. Ç., Ersundu, A. E., & Tekin, H. O. (2022) · Ceramics International · doi:10.1016/j.ceramint.2022.01.266 · Cited by 28 · see citing works

Increasing the hydrophobicity of filter medium particles for oily water treatment using coupling agents

Yue, C., Liu, J., Zhang, H., Dai, L., Wei, B., & Chang, Q. (2018) · Heliyon · doi:10.1016/j.heliyon.2018.e00809 · Cited by 24 · see citing works

Sustainable mortars for rehabilitation of old plasters

Torres, I. M., & Matias, G. (2016) · Engineering Structures · doi:10.1016/j.engstruct.2016.07.009 · Cited by 22 · see citing works

Environmental-friendly mortar produced with treated and untreated coal wastes as cement replacement materials

Soltaninejad, M., Soltaninejad, M., Farshad Saberi, K., Moshizi, M. K., Sadeghi, V., & Jahanbakhsh, P. (2021) · Clean Technologies and Environmental Policy · doi:10.1007/s10098-021-02204-x · Cited by 22 · see citing works

Effect of fly ash composition and component quantities on the gamma radiation shielding properties of geopolymer

Catenacci, M. J., Luckarift, H. R., Friedman, R. J., Male, A., & Owens, J. R. (2021) · Progress in Nuclear Energy · doi:10.1016/j.pnucene.2021.103889 · Cited by 21 · see citing works

Effect of fly ash geopolymer with 15% barium Sulphate as a design shielding box on radiation attenuation using GafchramicXR-QA2 film dosimetry

Shalbi, S. M., Jaafar, M. S., Ahmed, N. M., Al-Jarrah, A. M., & Naji, A. T. (2017) · IOSR Journal of Engineering · doi:10.9790/30210-702010812 · Cited by 6 · see citing works

SOME DURABILITY PROPERTIES OF ALKALI ACTIVATED MATERIALS (AAM) PRODUCED WITH CERAMIC POWDER AND MICRO CALCITE

Memiş, S. (2018) · Ceramics - Silikaty · doi:10.13168/cs.2018.0030 · Cited by 6 · see citing works

Sulphate Resistance of Boron Active Belite Cement Concrete

Aydın, A. C. (2020) · Journal of Cement Based Composites · doi:10.36937/cebacom.2020.001.003 · Cited by 4 · see citing works

High Temperature Performance of Self-Compacting Concrete Containing Boron Active Belite Cement

Aydın, A. C., Öz, A., Gök, N., & Bayrak, B. (2021) · Architecture Civil Engineering Environment · doi:10.21307/acee-2021-016 · Cited by 1 · see citing works

In-situ utilization of regolith resource and future exploration of additive manufacturing for lunar/martian habitats: A review

Wang, Y., Hao, L., Li, Y., Sun, Q., Sun, M., Huang, Y., Li, Z., Tang, D., Wang, Y., & Xiao, L. (2022) · Applied Clay Science · doi:10.1016/j.clay.2022.106673 · Cited by 126 · see citing works

Recent developments of radiation shielding concrete in nuclear and radioactive waste storage facilities – A state of the art review

Kanagaraj, B., Anand, N., Andrushia, A. D., & Naser, M. Z. (2023) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2023.133260 · Cited by 126 · see citing works

Physico-mechanical, thermal insulation and resistance characteristics of diatomite and attapulgite based geopolymer foam concrete: Effect of different curing regimes

Kaplan, G., Bayraktar, O. Y., Bayrak, B., Çelebi̇, O., Bodur, B., Öz, A., & Aydın, A. C. (2023) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2023.130850 · Cited by 72 · see citing works

Valorization of hazardous chrysotile by H3BO3 incorporation to produce an innovative eco-friendly radiation shielding concrete: Implications on physico-mechanical, hydration, microstructural, and shielding properties

Masoud, M. A., El-Khayatt, A. M., Mahmoud, K. A.-A., Rashad, A. M., Shahien, M. G., Bakhit, B. R., & Zayed, A. M. (2023) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2023.105120 · Cited by 58 · see citing works

A comprehensive review of lunar-based manufacturing and construction

Azami, M., Kazemi, Z., Moazen, S., Dubé, M., Potvin, M.-J., & Skonieczny, K. (2024) · Progress in Aerospace Sciences · doi:10.1016/j.paerosci.2024.101045 · Cited by 57 · see citing works

The effect of geopolymer slurries with clinker aggregates and marble waste powder on embodied energy and high-temperature resistance in prepacked concrete: ANFIS-based prediction model

Kaplan, G., Öz, A., Bayrak, B., & Aydın, A. C. (2023) · Journal of Building Engineering · doi:10.1016/j.jobe.2023.105987 · Cited by 46 · see citing works

Physico-mechanical and shielding properties of alkali-activated slag composites incorporating cement clinker aggregate: Effect of high temperature and particle size

Bayrak, B., Öz, A., Benli, A., Kavaz, E., Kaplan, G., & Aydın, A. C. (2023) · Journal of Building Engineering · doi:10.1016/j.jobe.2023.105982 · Cited by 41 · see citing works

From discarded waste to valuable products: Barite combination with chrysotile mine waste to produce radiation-shielding concrete

Zayed, A. M., El-Khayatt, A. M., Petrounias, P., Shahien, M. G., Mahmoud, K. A.-A., Rashad, A. M., Ragab, A. H., Hassan, A. A., Bakhit, B. R., & Masoud, M. A. (2024) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2024.135334 · Cited by 38 · see citing works

Computational AI Models for Investigating the Radiation Shielding Potential of High-Density Concrete

Amin, M. N., Ahmad, I., Iqbal, M., Abbas, A., Khan, K., Faraz, M. I., Alabdullah, A. A., & Ullah, S. (2022) · Materials · doi:10.3390/ma15134573 · Cited by 33 · see citing works

Innovative shielding solutions by geopolymer paste and fly ash as effective substitution of cement materials for sustainable protection

Frahat, N. B., Awed, A. S., Kassem, S. M., Maksoud, M. I. A. A., & Ibrahim, O. M. O. (2024) · Journal of Building Engineering · doi:10.1016/j.jobe.2024.108977 · Cited by 31 · see citing works

Effect of GGBS Content and Water/Geopolymer Solid Ratio on the Mechanical, Elevated Temperature Resistance, and Sorptivity Properties of FA/GGBS-Based Geopolymer Concrete

Yilmazoglu, A., Yıldırım, S. T., Yıldız, S., & Behçet, Ö. F. (2024) · Journal of Materials in Civil Engineering · doi:10.1061/jmcee7.mteng-17167 · Cited by 30 · see citing works

Recent advances in immobilization of radioactive cesium and strontium-bearing wastes in alkali activated materials – A review

Mukiza, E., Phung, Q. T., Seetharam, S. C., Nguyễn, T. N., Bruggeman, C., & Schutter, G. D. (2024) · Journal of Environmental Management · doi:10.1016/j.jenvman.2024.122746 · Cited by 25 · see citing works

Synthesis of Inorganic Polymeric Materials from Industrial Solid Waste

Das, D., & Rout, P. K. (2022) · Silicon · doi:10.1007/s12633-022-02116-5 · Cited by 23 · see citing works

Effect of waste colemanite and PVA fibers on GBFS-Metakaolin based high early strength geopolymer composites (HESGC): Mechanical, microstructure and carbon footprint characteristics

Öz, A., Bayrak, B., Kaplan, G., & Aydın, A. C. (2023) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2023.131064 · Cited by 23 · see citing works

Physico-mechanical and microstructural properties of waste geopolymer powder and lime-added semi-lightweight geopolymer concrete: Efficient machine learning models

Maranhão, F. D. S., de Souza, F. G., Soares, P., Alcan, H. G., Çelebi̇, O., Bayrak, B., Kaplan, G., & Aydın, A. C. (2023) · Journal of Building Engineering · doi:10.1016/j.jobe.2023.106629 · Cited by 23 · see citing works

Production and investigation of 3D printer ABS filaments filled with some rare-earth elements for gamma-ray shielding

Gultekin, B., Bulut, F., Yildiz, H., Us, H., & Oğul, H. (2023) · Nuclear Engineering and Technology · doi:10.1016/j.net.2023.09.009 · Cited by 23 · see citing works

Harnessing explainable Artificial Intelligence (XAI) for enhanced geopolymer concrete mix optimization

Revathi, B., Ravindran, G., Bala, G., Nagaraju, T. V., & Bonthu, S. (2024) · Results in Engineering · doi:10.1016/j.rineng.2024.103036 · Cited by 23 · see citing works

Deep Insights into the Radiation Shielding Features of Heavy Minerals in Their Native Status: Implications for Their Physical, Mineralogical, Geochemical, and Morphological Properties

Masoud, M. A., El-Khayatt, A. M., Marashdeh, M. W., Shahien, M. G., Bakhit, B. R., Abdelwahab, W., Rafea, M. A., & Zayed, A. M. (2022) · Sustainability · doi:10.3390/su142316225 · Cited by 22 · see citing works

Preparation and characterization of a novel prepacked aggregate geopolymer: A feasibility study

Kaplan, G., Shi, J., Öz, A., Bayrak, B., Dheyaaldin, M. H., & Aydın, A. C. (2023) · Powder Technology · doi:10.1016/j.powtec.2023.118423 · Cited by 21 · see citing works

Effect of aluminosilicate precursors and curing regime on physico-mechanical durability and microstructural characteristics of coral geopolymers (Cor-Geo): Cleaner production for coral islands

Bayrak, B., Çelebi̇, O., Öz, A., Ustabaş, İ., Kaplan, G., & Aydın, A. C. (2023) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2023.133596 · Cited by 18 · see citing works

Promoting the performance of green slag-based geopolymer using eskolaite nanoparticles for bio-mechanical, thermal, and shielding applications

Sayed, D. G., El-Gamal, S. M. A., El-Hosiny, F. I., Hazem, M. M., & Ramadan, M. (2024) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2024.136706 · Cited by 18 · see citing works

Silica-based geopolymers admixture of borosilicate waste glasses: A green material for gamma radiation shielding applications

Alomayrah, N., Alrowaili, Z. A., Arslan, H., Olarinoye, I. O., & Al-Buriahi, M. S. (2024) · Ceramics International · doi:10.1016/j.ceramint.2024.05.494 · Cited by 18 · see citing works

Synergetic effect of fibers on geopolymers: Cost-effective and sustainable perspective

Alcan, H. G., Bayrak, B., Öz, A., Çelebi̇, O., Kaplan, G., & Aydın, A. C. (2024) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2024.135059 · Cited by 15 · see citing works

Effectiveness of rice husk ash-derived alkali activator in fresh, mechanical, and microstructure properties of geopolymer mortar at ambient temperature curing

Das, S. K., Behera, N., Patro, S. K., Mustakim, S. M., Suda, Y., & Leklou, N. (2023) · Journal of Sustainable Cement-Based Materials · doi:10.1080/21650373.2023.2262465 · Cited by 15 · see citing works

Nuclear and radiation shielding performance of synthesized geopolymers with addition of CRT waste glass composites

Alzahrani, J. S., Alrowaili, Z. A., Olarinoye, I. O., Kırkbınar, M., Çalışkan, F., & Al-Buriahi, M. S. (2025) · Radiation Physics and Chemistry · doi:10.1016/j.radphyschem.2025.112706 · Cited by 13 · see citing works

Study on neutron shielding performance of high strength mortar modified by saturated super absorbent polymer

Yin, J., Ge, Y., Lv, Y., Zheng, H., Hou, Y., Chen, S., Dang, J., & Zhu, C. (2023) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2023.133841 · Cited by 13 · see citing works

Impact of electron-beam and gamma-ray on the compressive strength, surface features and phase composition of β-Ni(OH)2-impregnating-geopolymer pastes

Amin, M. S., Mohsen, A., Deghiedy, N. M., Abu‐Dief, A. M., Ahmed, H. A., Huange, H., & Ramadan, M. (2023) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2023.e02841 · Cited by 13 · see citing works

Transport mechanism of uranyl nitrate in nanopore of geopolymer with different Si/Al ratios: Molecular dynamics simulation

Wang, R., Zhou, X., Zhang, W., Ye, J., & Wang, J. (2023) · Journal of Solid State Chemistry · doi:10.1016/j.jssc.2023.124542 · Cited by 13 · see citing works

Optimization and mechanism analysis of multi-solid wastes-based geopolymer using response surface methodology

Huang, M., Bao, S., Zhang, Y., Li, M., Deng, C., & Chen, W. (2025) · International Journal of Minerals Metallurgy and Materials · doi:10.1007/s12613-024-3072-8 · Cited by 13 · see citing works

Characterization study of geopolymer concretes fabricated with clinker aggregates

Öz, A., Kara, İ. B., Bayrak, B., Kavaz, E., Kaplan, G., & Aydın, A. C. (2023) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2023.131461 · Cited by 12 · see citing works

Polymer-modified magnesium oxychloride cement: investigating the effects of epoxy and polyurethane on water submergence performance

Mohsen, A., Badawy, A. H., El-Feky, M. S., & Kohail, M. (2024) · Asian Journal of Civil Engineering · doi:10.1007/s42107-024-01114-9 · Cited by 12 · see citing works

Improved chloride transport resistance of cement mortar using quartz sands modified with MgAl-LDH

Ma, G., Xu, J., & Wang, Z. (2023) · Journal of Building Engineering · doi:10.1016/j.jobe.2023.107557 · Cited by 9 · see citing works

Radiation shielding properties of shotcrete containing different aggregates

Polat, H., & Özel, C. (2024) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2024.129596 · Cited by 8 · see citing works

A comprehensive study on factors influencing radiation shielding concrete characteristics

Nanda, A., & Panigrahi, S. K. (2025) · Nuclear Engineering and Design · doi:10.1016/j.nucengdes.2025.114466 · Cited by 6 · see citing works

Estimating Radiation Shielding of Fired Clay Bricks Using ANN and GEP Approaches

Amin, M. N., Ahmad, I., Abbas, A., Khan, K., Qadir, M. G., Iqbal, M., Arab, A. M. A., & Alabdullah, A. A. (2022) · Materials · doi:10.3390/ma15175908 · Cited by 6 · see citing works

Assessing rapid strength achievement in geopolymers from mixed construction and demolition waste

Yıldırım, G., Özçelikci, E., Günal, M. F., Ozel, B. F., Kul, A., Tuncer, M., Alhawat, M., & Ashour, A. F. (2025) · Journal of Building Engineering · doi:10.1016/j.jobe.2025.113944 · Cited by 5 · see citing works

Electromagnetic shielding performance and mechanical properties of vermiculite-based lightweight geopolymer mortars

Çeli̇k, A. İ., Tunç, U., Durmuş, A., Karaköse, E., Alkurt, F. Ö., & Karaaslan, M. (2026) · Scientific Reports · doi:10.1038/s41598-026-38722-1 · Cited by 5 · see citing works

Novel geopolymer materials for fast and thermal neutron shielding

Zhou, J., Fields, A. W. L., Bauer, S. H., Özer, A., Kriven, W. M., & Fulvio, A. D. (2025) · Annals of Nuclear Energy · doi:10.1016/j.anucene.2025.111388 · Cited by 5 · see citing works

Optimization of Mechanical Properties and Embodied Energy of Polyvinyl Alcohol Fiber-Reinforced High-Strength Alkali-Activated Slag Mortars: Comparative Study

Öz, A. (2023) · Journal of Materials in Civil Engineering · doi:10.1061/jmcee7.mteng-15926 · Cited by 4 · see citing works

Study on Dynamic and Static Mechanical Properties of Copper-Plated Steel-Fiber-Reinforced Self-Compacting Concrete

Qi, J., Liu, A., Su, P., & Mu, C. (2023) · Materials · doi:10.3390/ma16114025 · Cited by 3 · see citing works

Improvement of Durability Aspects of CAC-Based Alkali-Activated Concrete

Prusty, S. R., Behera, D., Panigrahi, R., & Jena, S. (2023) · Iranian Journal of Science and Technology Transactions of Civil Engineering · doi:10.1007/s40996-023-01098-7 · Cited by 3 · see citing works

The Effect of RHA and GBFS on the Mechanical and Physical Properties of Cementitious Composites with High Early Age Compressive and Flexural Strength: Bayesian Algorithm for the Design

Bayraktar, O. Y., & Fello, F. M. A. (2023) · Iranian Journal of Science and Technology Transactions of Civil Engineering · doi:10.1007/s40996-023-01168-w · Cited by 3 · see citing works

Evaluation of Radiation Shielding Parameters for Fly Ash/Slag–Based Geopolymer Mortars

El, A., Abdelmonem, A. M., Kotb, N. A., Taman, M. H., Behiry, R. N., & Eissa, M. (2025) · Nuclear Technology · doi:10.1080/00295450.2025.2530860 · Cited by 2 · see citing works

Effect of natural zeolite replacement with waste marble powder on the physical, mechanical, and microstructural properties of geopolymers at different curing temperatures

Danish, A., Kaya, M., Gençel, O., & Ozbakkaloglu, T. (2026) · Archives of Civil and Mechanical Engineering · doi:10.1007/s43452-026-01455-z · Cited by 2 · see citing works

Investigating the Mechanical and Durability Properties of Geopolymer Concrete Based on Granulated Blast Furnace Slag as Green Concrete

Mansourghanaei, M. (2023) · Journal of Civil Engineering Researchers · doi:10.61186/jcer.5.3.24 · Cited by 2 · see citing works

Experimental study on bond properties of GFRP bars and barite radiation shielding concrete

Liu, T., Sun, P., Liu, X., Xu, N., Shi, Z., Yue, K., Hua, L., & Li, S. (2025) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2025.141940 · Cited by 2 · see citing works

Gamma and Neutron Shielding Performance of ABS Polymer Doped with MoS₂ and CaWO₄: Experimental and Simulation-Based Study

Baştuğ, E. A., Oğul, H., Bulut, F., & Akman, F. (2025) · Nuclear Technology · doi:10.1080/00295450.2025.2521960 · Cited by 1 · see citing works

Effect of micro synthetic fibers content, spiral stirrups, curing, and high temperature on bond strength: A comparative study between experimental results and prediction models

Koç, K., Bayrak, B., & Aydın, A. C. (2026) · Structural Concrete · doi:10.1002/suco.70479 · Cited by 1 · see citing works

Radiation Shielding Properties of Polyethylene Reinforced with PbO and CdO: Experimental and Theoretical Study

Abdelmonem, A. M., Breky, M. M. E., & Attallah, M. F. (2026) · Nuclear Science and Engineering · doi:10.1080/00295639.2025.2607940 · Cited by 1 · see citing works

Investigation of Physical, Mechanical and Radiation Shielding Properties of Shotcrete Containing Different AggregatesPreprint

Polat, H., & Özel, C. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4822925 · Cited by 1 · see citing works

Technical performance and gamma-ray shielding of geopolymer mortar containing copper slag: effects of NaOH concentration and Na2SiO3/NaOH ratio

Almasi, A., Mousavi, S. Y., Ghodsi, O. N., & Zanganeh, V. (2025) · Multiscale and Multidisciplinary Modeling Experiments and Design · doi:10.1007/s41939-025-01002-y

Laterite-Based Low-Carbon Binder Supporting the Circular Economy in Yaoundé, Cameroon

Leduc, L. M., Diffo, B. B. K., Ambroise, J., & Bennani, A. (2025) · Buildings · doi:10.3390/buildings15173154

Material and processing design strategies for enhancing gamma-radiation shielding of geopolymer concrete as an emerging shielding material: A review

Bui, T. K., Dat, T. T., Huy, L. G., & Minh, D. Q. (2026) · Radiation Physics and Chemistry · doi:10.1016/j.radphyschem.2026.113937

Radiation Aspects and Performance of Geo-polymerized Zeolite Concrete

Sayed, A. A. A.-K. A., & Abdelkhalik, A. (2026) · ENGINOM in Engineering Innovations · doi:10.66632/eei-2026-29

Waste-to-resource conversion of metal surface treatment sludges into functional alkali-activated materials: performance evaluation, heavy-metal immobilization and radiation protection capacity

Nagui, N., Khalaf, F., & Mohsen, A. (2026) · Journal of Hazardous Materials Advances · doi:10.1016/j.hazadv.2026.101689

A comprehensive characterization on geopolymer concretes with low content slag and quartz aggregates: the shielding features

Alcan, H. G., Bayrak, B., Öz, A., Kavaz, E., Kaplan, G., Çelebi̇, O., & Aydın, A. C. (2023) · Radiation effects and defects in solids · doi:10.1080/10420150.2023.2184363 · Cited by 11 · see citing works

Effect of quartz powder on mid-strength fly ash geopolymers at short curing time and low curing temperature

Kaplan, G., Öz, A., Bayrak, B., Alcan, H. G., Çelebi̇, O., & Aydın, A. C. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.127153 · Cited by 74 · see citing works

Synergic effect of some waste pozzolans on the mechanical and shielding properties of geopolymer concretes

Bayrak, B., Öz, A., Kavaz, E., Kaplan, G., Çelebi̇, O., Alcan, H. G., & Aydın, A. C. (2023) · Radiation effects and defects in solids · doi:10.1080/10420150.2023.2191849 · Cited by 12 · see citing works

Characterization study of geopolymer concretes fabricated with clinker aggregates

Öz, A., Kara, İ. B., Bayrak, B., Kavaz, E., Kaplan, G., & Aydın, A. C. (2023) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2023.131461 · Cited by 12 · see citing works

Effect of Si3N4 on metakaolin clay-based geopolymers: EDS, SEM, hardness, and gamma radiation shielding properties

Al-Buriahi, M. S., Alomayrah, N., Alsaiari, N. S., Tehçi, T., & Çalışkan, F. (2025) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2025.142857 · Cited by 8 · see citing works