The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
Performance evaluation of polypropylene fibre reinforced recycled aggregate concrete
Abstract
The present experimental investigation examined the influence of incorporation of microfilament type polypropylene fibres into low strength recycled aggregate concrete on the basis of number of parameters such as compressive strength, split tensile strength, flexural strength, modulus of elasticity and non-destructive parameters. Experimental studies are carried out with addition of 0.5%, 0.75% and 1% polypropylene fibres in both natural aggregate concrete (NAC) and recycled aggregate concrete (RAC). The recycled aggregate concrete is prepared with 100% replacement of recycled coarse aggregates with natural coarse aggregates. The present study reveals that the fibre content has negligible effects on compressive strength. However, the fibres play an important role in determining the split tensile and flexural strength of concrete for both NAC and RAC. The maximum increments for RAC are 12.01% and 17.15% for split and flexural strength values respectively over unreinforced RAC. Based on the results obtained for each series, it can be inferred that optimum fiber content is 0.5%. The variations of axial and lateral strain with axial stress are also determined using strain gauges. It can be observed that the effect of fibres on strain enhancement is more prominent in case of NAC compare to RAC.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Neville, A. M. (1968) · Virtual Defense Library (Ministerio de Defensa) · Cited by 5,444
Mechanical properties of recycled aggregate concrete under uniaxial loading
Xiao, J., Li, J., & Zhang, C. (2005) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.09.020 · Cited by 1,175
Mechanical behaviour of concrete made with fine recycled concrete aggregates
Evangelista, L., & de Brito, J. (2007) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2006.12.004 · Cited by 1,059
Brandt, A. M. (2008) · Composite Structures · doi:10.1016/j.compstruct.2008.03.006 · Cited by 924
Fiber-reinforced concrete: an overview after 30 years of development
Zollo, R. F. (1997) · Cement and Concrete Composites · doi:10.1016/s0958-9465(96)00046-7 · Cited by 802
Use of recycled concrete aggregate in high-strength concrete
Limbachiya, M. C., Leelawat, T., & Dhir, R. K. (2000) · Materials and Structures · doi:10.1007/bf02480538 · Cited by 714
Habel, K., Viviani, M., Denarié, E., & Brühwiler, E. (2006) · Cement and Concrete Research · doi:10.1016/j.cemconres.2006.03.009 · Cited by 647
Mechanical properties of hybrid fiber-reinforced concrete at low fiber volume fraction
Yao, W., Li, J., & Wu, K. (2003) · Cement and Concrete Research · doi:10.1016/s0008-8846(02)00913-4 · Cited by 578
Recycled Concrete as Aggregate for Structural Concrete Production
Malešev, M., Radonjanin, V., & Marinković, S. (2010) · Sustainability · doi:10.3390/su2051204 · Cited by 523
Mechanical properties of polypropylene hybrid fiber-reinforced concrete
Hsie, M., Tu, C., & Song, P. S. (2008) · Materials Science and Engineering: A · doi:10.1016/j.msea.2008.05.037 · Cited by 517
Influence of the amount of recycled coarse aggregate in concrete design and durability properties
Kwan, W. H., Ramli, M., Kam, K. J., & Sulieman, M. Z. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2011.06.059 · Cited by 501
Mechanical and elastic behaviour of concretes made of recycled-concrete coarse aggregates
Corinaldesi, V. (2010) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2010.02.031 · Cited by 443
Concrete with recycled concrete aggregate and crushed clay bricks
Yang, J., Du, Q., & Bao, Y. (2011) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2010.11.063 · Cited by 427
Silva, R. V., de Brito, J., & Dhir, R. K. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.10.064 · Cited by 424
Alhozaimy, A. M., Soroushian, P., & Mirza, F. (1996) · Cement and Concrete Composites · doi:10.1016/0958-9465(95)00003-8 · Cited by 407
Kou, S.-C., Poon, C. S., & Etxeberria, M. (2010) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2010.10.003 · Cited by 393
Compressive stress–strain behavior of steel fiber reinforced-recycled aggregate concrete
Carneiro, J. A., Lima, P. R. L., Leite, M. B., & Toledo Filho, R. D. (2014) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2013.11.006 · Cited by 384
Katkhuda, H., & Shatarat, N. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.02.128 · Cited by 368
Influence of mixed recycled aggregate on the physical – mechanical properties of recycled concrete
Medina, C., Zhu, W., Howind, T., Sánchez de Rojas, M. I., & Frías, M. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.01.002 · Cited by 352
Kou, S.-C., & Poon, C. S. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.12.035 · Cited by 329
Mefteh, H., Kebaïli, O., Oucief, H., Berredjem, L., & Arabi, N. (2013) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2013.05.009 · Cited by 302
Influence of Nano-Silica on the properties of recycled aggregate concrete
Mukharjee, B. B., & Barai, S. V. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.01.003 · Cited by 291
Self-citationRecycled construction and demolition concrete waste as aggregate for structural concrete
Wagih, A. M., El-Karmoty, H. Z., Ebid, M., & Okba, S. H. (2013) · HBRC Journal · doi:10.1016/j.hbrcj.2013.08.007 · Cited by 286
Yap, S. P., Alengaram, U. J., & Jumaat, M. Z. (2013) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.02.070 · Cited by 248
Properties of polypropylene fiber reinforced concrete using recycled aggregates
Akça, K. R., Çakır, Ö., & İpek, M. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.08.133 · Cited by 240
Mechanical behavior of three generations of 100% repeated recycled coarse aggregate concrete
Huda, S. B., & Alam, M. S. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.05.010 · Cited by 221
Material properties of basalt fibre reinforced concrete made with recycled earthquake waste
Dong, J. F., Wang, Q. Y., & Guan, Z. W. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.08.118 · Cited by 195
Akbarnezhad, A., Ong, K. C. G., Tam, C. T., & Zhang, M. H. (2013) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0000789 · Cited by 194
Properties of Polypropylene Fiber Reinforced Concrete
(1993) · ACI Materials Journal · doi:10.14359/4439 · Cited by 174
Initial moisture and mixing effects on higher quality recycled coarse aggregate concrete
Brand, A. S., Roesler, J. R., & Salas, A. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.01.047 · Cited by 165
Kou, S.-C., & Poon, C. S. (2008) · Magazine of Concrete Research · doi:10.1680/macr.2007.00052 · Cited by 161
Gao, D., & Zhang, L. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.10.073 · Cited by 160
Recycling and reuse of waste concrete in China
Xu-ping, L. (2009) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2008.11.005 · Cited by 152
Hoffmann, C., Schubert, S. I., Leemann, A., & Motavalli, M. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2011.10.007 · Cited by 127
Building application of recycled aggregate concrete for upper-ground structural elements
Yoda, K., & Shintani, A. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.12.096 · Cited by 57
Cited by
Qureshi, L. A., Ali, B., & Ali, A. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.120636 · Cited by 309
An experimental study on mechanical and fracture characteristics of hybrid fibre reinforced concrete
Islam, S. U., & Waseem, S. A. (2024) · Structures · doi:10.1016/j.istruc.2024.107053 · Cited by 24
Lang, W., Chen, W., Xie, Q., Wang, P., & Zhang, G. (2025) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2025.e05156 · Cited by 2
Metadata
- Authors
- Das, C. S., Dey, T., Dandapat, R., Mukharjee, B. B., & Kumar, J.
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2018-11
- Volume
- 189
- Pages
- 649-659
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W2892283406
- Cited by
- 297
- References
- 35
- FWCI
- 13.50
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.