The DOI matches its Crossref record; 45 of the 45 references it cites were found in a registry or an index.
Life cycle assessment of geopolymer concrete
Abstract
The Life Cycle Assessment (LCA) of a Geopolymer Concrete (GC) was elaborated after scaling up the Life Cycle Inventory (LCI) from laboratory scale to industrial scale. The most relevant raw materials and processes contributing to its environmental performance were identified. Besides, the influence in the environmental impacts of both, the electricity generation mix considered (2012 and 2018 energy mix for Ecuador), and the source of alkali activators (produced in Ecuador and imported from Europe), was demonstrated. The production of sodium hydroxide is the most relevant process in all life cycle impact categories. An energy mix with a higher contribution of hydroelectricity (2018 energy mix: 85% hydroelectricity) entails favorable results. The differences between locally produced and imported sodium hydroxide are the energy mix considered (Ecuadorian vs. average European), and the type of sodium chloride used as raw material (obtained through seawater evaporation in Ecuador vs. solution and rock mining in Europe). GC entails an environmental performance advantage compared to a conventional concrete (CC) if the following two conditions are applied: sodium hydroxide is produced using local solar salt, and the electricity mix is the expected energy mix for 2018 in Ecuador. Under this condition, Global Warming Potential (GWP) characterization for GC is 64% lower than CC.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fundamentals of heat and mass transfer
Hewitt, G. F. (2008) · Begellhouse eBooks · Cited by 12,932
The ecoinvent database version 3 (part I): overview and methodology
Wernet, G., Bauer, C., Steubing, B., Reinhard, J., Moreno-Ruiz, E., & Weidema, B. (2016) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-016-1087-8 · Cited by 5,564
Fundamentals of Heat and Mass Transfer
Azim, A. Y. A. (2011) · Cited by 5,433
Carbon dioxide equivalent (CO2-e) emissions: A comparison between geopolymer and OPC cement concrete
Turner, L. K., & Collins, F. G. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.01.023 · Cited by 2,411
Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement
McLellan, B. C., Williams, R. P., Lay, J., van Riessen, A., & Corder, G. D. (2011) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.02.010 · Cited by 1,949
Environmental management. Life cycle assessment. Requirements and guidelines
(2015) · doi:10.3403/30152732u · Cited by 1,730
Habert, G., d’Espinose de Lacaillerie, J. B., & Roussel, N. (2011) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.03.012 · Cited by 1,407
Environmental management. Life cycle assessment. Principles and framework
(2013) · doi:10.3403/30151316 · Cited by 1,401
Huntzinger, D. N., & Eatmon, T. D. (2009) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2008.04.007 · Cited by 1,392
Green house gas emissions due to concrete manufacture
Flower, D. J. M., & Sanjayan, J. G. (2007) · The International Journal of Life Cycle Assessment · doi:10.1065/lca2007.05.327 · Cited by 912
Assessment of CO2 reduction of alkali-activated concrete
Yang, K.-H., Song, J.-K., & Song, K.-I. (2013) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2012.08.001 · Cited by 832
Chen, C., Habert, G., Bouzidi, Y., & Jullien, A. (2010) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2009.12.014 · Cited by 718
Geopolymers : structure, processing, properties and industrial applications
Provis, J. L., & van Deventer, J. S. J. (2009) · Cited by 674
Piccinno, F., Hischier, R., Seeger, S., & Som, C. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.06.164 · Cited by 670
Sustainability of Concrete Construction
Naik, T. R. (2008) · Practice Periodical on Structural Design and Construction · doi:10.1061/(asce)1084-0680(2008)13:2(98 · Cited by 488
Teh, S. H., Wiedmann, T., Castel, A., & de Burgh, J. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.03.122 · Cited by 360
Minimising the global warming potential of clay based geopolymers
Heath, A., Paine, K., & McManus, M. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.04.046 · Cited by 352
Cement production technology improvement compared to factor 4 objectives
Habert, G., Billard, C., Rossi, P., Chen, C., & Roussel, N. (2010) · Cement and Concrete Research · doi:10.1016/j.cemconres.2009.09.031 · Cited by 313
Comparative LCA of recycled and conventional concrete for structural applications
Knoeri, C., Sanyé-Mengual, E., & Althaus, H.-J. (2013) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-012-0544-2 · Cited by 303
Salazar, R. A. R., Arcila, J. M. M., de Gutiérrez, R. M., & Martínez, E. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.05.017 · Cited by 295
Geopolymer synthesis using alkaline activation of natural zeolite
Villa, C., Pecina, E. T., Torres, R., & Gómez, L. (2010) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2010.04.052 · Cited by 291
Salas, D. A., Ramirez, A. D., Rodríguez, C. R., Petroche, D. M., Boero, A. J., & Duque-Rivera, J. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.11.078 · Cited by 282
Self-citationEffect of type, form, and dosage of activators on strength of alkali-activated natural pozzolans
Bondar, D., Lynsdale, C. J., Milestone, N. B., Hassani, N., & Ramezanianpour, A. A. (2010) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2010.10.021 · Cited by 277
Chen, W., Hong, J., & Xu, C. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.04.048 · Cited by 246
Feiz, R., Ammenberg, J., Baas, L., Eklund, M., Helgstrand, A., & Marshall, R. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.01.083 · Cited by 245
Reducing the environmental impact of concrete and asphalt: a scenario approach
Blankendaal, T., Schuur, P., & Voordijk, H. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2013.10.012 · Cited by 243
Environmental assessment of green concretes for structural use
Marinković, S., Dragaš, J., Ignjatović, I., & Tošić, N. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.04.015 · Cited by 237
Passuello, A., Rodríguez, E. D., Hirt, E., Longhi, M., Bernal, S. A., Provis, J. L., & Kirchheim, A. P. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.08.007 · Cited by 223
Implementation of best available techniques in cement manufacturing: a life-cycle assessment study
Valderrama, C., Granados, R., Cortina, J. L., Gasol, C. M., Guillem, M., & Josa, A. (2012) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.11.055 · Cited by 220
Life-cycle analysis of geopolymers
Weil, M., Dombrowski, K., & Buchwald, A. (2009) · Geopolymers · doi:10.1533/9781845696382.2.194 · Cited by 185
Valipour, M., Yekkalar, M., Shekarchi, M., & Panahi, S. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2013.07.055 · Cited by 161
Geopolymer materials based on natural zeolite
Nikolov, A., Rostovsky, I., & Nugteren, H. W. (2017) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2017.03.001 · Cited by 148
Nguyễn, L. K., Moseson, A. J., Farnam, Y. A., & Spatari, S. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.02.247 · Cited by 134
The LCA of portland cement production in China
Li, C., Cui, S., Nie, Z., Gong, X., Wang, Z., & Itsubo, N. (2014) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-014-0804-4 · Cited by 121
Properties of alkali-activated clinoptilolite
Ortega, E. A., Cheeseman, C. R., Knight, J., et al. (2000) · Cement and Concrete Research · doi:10.1016/s0008-8846(00)00331-8 · Cited by 112
Life Cycle Assessment of applying CO 2 post-combustion capture to the Spanish cement production
García-Gusano, D., Garraín, D., Herrera, I., Cabal, H., & Lechón, Y. (2013) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2013.11.056 · Cited by 109
Environmental challenges of the chlor-alkali production: Seeking answers from a life cycle approach
García-Herrero, I., Margallo, M., Onandía, R., García, R. A., & Irabien, Á. (2016) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2016.10.202 · Cited by 102
Strazza, C., Borghi, A. D., Gallo, M., & Borghi, A. D. (2011) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.05.014 · Cited by 98
Eco-sustainable Geopolymer Concrete Blocks Production Process
Petrillo, A., Cioffi, R., Ferone, C., Colangelo, F., & Borrelli, C. (2016) · Agriculture and Agricultural Science Procedia · doi:10.1016/j.aaspro.2016.02.037 · Cited by 95
Life Cycle Assessment of Concrete
Sjunnesson, J. (2005) · Lund University Publications Student Papers (Lund University) · Cited by 74
Machiels, L., Garcés, D., Snellings, R., Vilema, W., Morante-Carballo, F., Paredes, C., & Elsen, J. (2013) · Applied Clay Science · doi:10.1016/j.clay.2013.10.018 · Cited by 43
Matheu, P. S., Ellis, K., & Varela, B. (2015) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/96/1/012080 · Cited by 37
Baykara, H., Cornejo, M., Murillo, R., Gavilanes, A., Paredes, C., & Elsen, J. (2017) · Materials and Structures · doi:10.1617/s11527-017-1057-z · Cited by 33
Self-citationZeolite mineralogy of the Cayo formation in Guayaquil, Ecuador
Machiels, L., Morante-Carballo, F., Snellings, R., Calvo, B., Canoira, L. J., Paredes, C., & Elsen, J. (2008) · Applied Clay Science · doi:10.1016/j.clay.2008.01.012 · Cited by 32
Ulloa, N. A., Baykara, H., Rigail-Cedeño, A. F., Cornejo, M., & Villalba, J. L. (2017) · Journal of Molecular Structure · doi:10.1016/j.molstruc.2017.06.066 · Cited by 21
Self-citation
Cited by
Recent progress in low-carbon binders
Shi, C., Qu, B., & Provis, J. L. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.05.009 · Cited by 714
Environmental impact assessment of fly ash and silica fume based geopolymer concrete
Bajpai, R., Choudhary, K., Srivastava, A., Sangwan, K. S., & Singh, M. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.120147 · Cited by 576
Zhao, J., Tong, L., Li, B., Chen, T., Wang, C., Yang, G., & Zheng, Y. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.127085 · Cited by 369
Alsalman, A., Assi, L. N., Kareem, R. S., Carter, K., & Ziehl, P. (2021) · Cleaner Environmental Systems · doi:10.1016/j.cesys.2021.100047 · Cited by 344
Geopolymer concrete as sustainable material: A state of the art review
Farooq, F., Jin, X., Faisal Javed, M., Akbar, A., Izhar Shah, M., Aslam, F., & Alyousef, R. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.124762 · Cited by 344
Metadata
- Authors
- Salas, D. A., Ramirez, A. D., Ulloa, N., Baykara, H., & Boero, A. J.
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2018-11
- Volume
- 190
- Pages
- 170-177
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W2894444184
- Cited by
- 347
- References
- 45
- FWCI
- 12.35
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.