The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
Environmental impact assessment of fly ash and silica fume based geopolymer concrete
Abstract
Abstract Alkali activated geopolymer is an attractive solution to limit the adverse consequences of cement manufacturing. In this paper, an evaluation of environmental impacts of geopolymer containing fly ash and silica fume is conducted. Life cycle assessment is performed by benchmarking the environmental impacts of three geopolymer concrete mixes against the conventional cement concrete, namely: fly ash geopolymer (with hydroxide and silicate of sodium); fly ash–silica fume blend geopolymer (with hydroxide and silicate of sodium); and fly ash–silica fume blend geopolymer (with sodium hydroxide). Impact analysis is performed by using ReCiPe midpoint and endpoint methods in life cycle assessment software UMBERTO NXT using database of Ecoinvent 3.0. Sensitivity analysis is performed to determine the effect of transportation. One mix design for each concrete of equal water to binder ratio and 28-days compressive strength of more than 35 MPa is analysed. Results of life cycle assessment indicate that alkaline activators and cement are the major sources of negative environmental impacts for geopolymer and cement concrete, respectively. Global warming potential of geopolymer concretes is lower than conventional cement concrete. Fly ash–silica fume geopolymer concrete activated without sodium silicate has lowest environmental impacts. Transportation of raw materials is found to increase the overall negative of all four concrete mixes. Cost reduction of 10.87%–17.77% per unit volume is achieved with the use of fly ash – silica fume based geopolymer concrete. Sustainability in terms of cost and environmental benefits of geopolymer concrete can be further increased by using silica fume. It can be concluded that the use of fly ash – silica fume blended geopolymer in the construction industry has huge possibility to improve its sustainability. Furthermore, waste management can be effectively done by utilization of industrial by-products in concrete.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The ecoinvent database version 3 (part I): overview and methodology
Wernet, G., Bauer, C., Steubing, B., Reinhard, J., Moreno-Ruiz, E., & Weidema, B. (2016) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-016-1087-8 · Cited by 5,564
Geopolymers: Inorganic polymeric new materials
Davidovits, J. (1991) · Journal of Thermal Analysis · doi:10.1007/bf01912193 · Cited by 4,251
Carbon dioxide equivalent (CO2-e) emissions: A comparison between geopolymer and OPC cement concrete
Turner, L. K., & Collins, F. G. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.01.023 · Cited by 2,411
Provis, J. L. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.02.009 · Cited by 2,272
Industrially interesting approaches to “low-CO2” cements
Gartner, E. (2004) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.01.021 · Cited by 2,016
The role of inorganic polymer technology in the development of ‘green concrete’
Duxson, P., Provis, J. L., Lukey, G. C., & van Deventer, J. S. J. (2007) · Cement and Concrete Research · doi:10.1016/j.cemconres.2007.08.018 · Cited by 1,998
Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement
McLellan, B. C., Williams, R. P., Lay, J., van Riessen, A., & Corder, G. D. (2011) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.02.010 · Cited by 1,949
Habert, G., d’Espinose de Lacaillerie, J. B., & Roussel, N. (2011) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.03.012 · Cited by 1,407
Recent advances in understanding the role of supplementary cementitious materials in concrete
Juenger, M. C. G., & Siddique, R. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.03.018 · Cited by 1,229
Assessment of CO2 reduction of alkali-activated concrete
Yang, K.-H., Song, J.-K., & Song, K.-I. (2013) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2012.08.001 · Cited by 832
Cited by
Potential applications of geopolymer concrete in construction: A review
Almutairi, A. L., Tayeh, B. A., Adesina, A., Isleem, H. F., & Zeyad, A. M. (2021) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2021.e00733 · Cited by 481
Shehata, N., Mohamed, O. A., Sayed, E. T., Abdelkareem, M. A., & Olabi, A. G. (2022) · Science of The Total Environment · doi:10.1016/j.scitotenv.2022.155577 · Cited by 371
Geopolymer concrete as sustainable material: A state of the art review
Farooq, F., Jin, X., Faisal Javed, M., Akbar, A., Izhar Shah, M., Aslam, F., & Alyousef, R. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.124762 · Cited by 344
Life cycle assessment of alkali-activated materials: a systematic literature review
Nikravan, M., Firdous, R., & Stephan, D. (2023) · Low-carbon Materials and Green Construction · doi:10.1007/s44242-023-00014-6 · Cited by 93
Hansen, S., & Sadeghian, P. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.122785 · Cited by 89
Metadata
- Authors
- Bajpai, R., Choudhary, K., Srivastava, A., Sangwan, K. S., & Singh, M.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2020-05
- Volume
- 254
- Pages
- 120147
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W2999099326
- Cited by
- 576
- References
- 37
- FWCI
- 43.54
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Environmental impact assessment of fly ash and silica fume based geopolymer concrete. https://app.cochat.ai/papers/10.1016/j.jclepro.2020.120147
- The paper
- Bajpai, R., Choudhary, K., Srivastava, A., Sangwan, K. S., & Singh, M. (2020). Environmental impact assessment of fly ash and silica fume based geopolymer concrete. Journal of Cleaner Production. https://doi.org/10.1016/j.jclepro.2020.120147
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.