The DOI matches its Crossref record; 49 of the 49 references it cites were found in a registry or an index.
Effectiveness of alkali-activated slag as alternative binder on workability and early age compressive strength of cemented paste backfills
Abstract
A full understanding of the workability and unconfined compressive strength (UCS) of cemented paste backfill (CPB), made of alkali-activated slag (AAS) as an alternative binder, is critical for effectively applying the AAS technology to most modern mines. In this paper, the effects of solid content, binder dosage, activator to binder (Al/Bi) ratio, sodium silicate to sodium hydroxide (SS/SH) ratio, and curing temperature on fresh and hardened properties of AAS-CPB mass were experimentally investigated after curing ages of 3, 7, 14 and 28 days. Results have shown that for a given backfill recipe and curing time, AAS-CPB matrix provides far better workability and UCS (2.2–3.3 fold) performance than OPC-CPB matrix. The workability of fresh AAS-CPB matrix decreases with solid content and SS/SH ratio, and increases with an increase in binder dosage and Al/Bi ratio. The strength increases with solid content and binder dosage, but at a decreasing rate. At low levels, an increase in the Al/Bi ratio leads to higher UCS, while extremely high Al/Bi ratio hinders the hydration of Slag, resulting in lower UCS. It is also found that the SS/SH ratio has a major effect on UCS of AAS-CPB matrix, depending on curing age. At early ages (3 days), AAS-CPB matrix experiences a gradual increase in UCS up to a SS/SH ratio of 1, followed a small decrease with a further increase in the SS/SH ratio. Moreover, elevated temperature gives higher 3-day UCS, but notably inhibits strength gaining beyond 3 days. The UCS performance of AAS-CPB matrix subjected to expose curing at 3 days is higher than sealed curing sample, and then almost levels out. The findings of this study will be useful for the final design of more cost-effective, durable and environmental friendly AAS-CPB matrix at ambient conditions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Alkali-Activated Cements and Concretes
Shi, C., Krivenko, P. V., & Roy, D. (2006) · Taylor & Francis eBooks · doi:10.4324/9780203390672 · Cited by 1,164
NaOH-activated ground fly ash geopolymer cured at ambient temperature
Somna, K., Jaturapitakkul, C., Kajitvichyanukul, P., & Chindaprasirt, P. (2011) · Fuel · doi:10.1016/j.fuel.2011.01.018 · Cited by 995
Alkali-activated binders: A review
Pacheco-Torgal, F., Castro-Gomes, J., & Jalali, S. (2008) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2007.10.015 · Cited by 989
Deb, P. S., Nath, P., & Sarker, P. K. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.05.001 · Cited by 941
Influence of NaOH solution on the synthesis of fly ash geopolymer
Rattanasak, U., & Chindaprasirt, P. (2009) · Minerals Engineering · doi:10.1016/j.mineng.2009.03.022 · Cited by 939
Alkali-activated fly ash/slag cements
Puertas, F., Martı́nez-Ramı́rez, S., Alonso, S., & Vázquez, T. (2000) · Cement and Concrete Research · doi:10.1016/s0008-8846(00)00298-2 · Cited by 921
van Jaarsveld, J. G. S., van Deventer, J. S. J., & Lukey, G. C. (2002) · Chemical Engineering Journal · doi:10.1016/s1385-8947(02)00025-6 · Cited by 898
Synthesis and characterization of red mud and rice husk ash-based geopolymer composites
He, J., Jie, Y., Zhang, J., Yu, Y., & Zhang, G. (2013) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2012.11.010 · Cited by 770
Comparative study on the characteristics of fly ash and bottom ash geopolymers
Chindaprasirt, P., Jaturapitakkul, C., Chalee, W., & Rattanasak, U. (2009) · Waste Management · doi:10.1016/j.wasman.2008.06.023 · Cited by 735
Effect of synthesis parameters on the mechanical properties of fly ash-based geopolymers
Panias, D., Giannopoulou, I. P., & Perraki, T. (2007) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2006.12.064 · Cited by 726
Factors affecting the strength of alkali-activated slag
Wang, S.-D., Scrivener, K. L., & Pratt, P. L. (1994) · Cement and Concrete Research · doi:10.1016/0008-8846(94)90026-4 · Cited by 716
Görhan, G., & Kürklü, G. (2014) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2013.10.082 · Cited by 637
Fernández-Jiménez, A., Palomo, J. G., & Puertas, F. (1999) · Cement and Concrete Research · doi:10.1016/s0008-8846(99)00154-4 · Cited by 598
Resistance of alkali-activated slag concrete to acid attack
Bakharev, T., Sanjayan, J. G., & Cheng, Y.-B. (2003) · Cement and Concrete Research · doi:10.1016/s0008-8846(03)00125-x · Cited by 586
Alonso, S., & Palomo, A. (2001) · Materials Letters · doi:10.1016/s0167-577x(00)00212-3 · Cited by 542
Part, W. K., Ramli, M., & Cheah, C. B. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.12.065 · Cited by 525
Workability and strength of lignite bottom ash geopolymer mortar
Sathonsaowaphak, A., Chindaprasirt, P., & Pimraksa, K. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2009.01.120 · Cited by 507
Design and Application of Underground Mine Paste Backfill Technology
Belem, T., & Benzaazoua, M. (2007) · Geotechnical and Geological Engineering · doi:10.1007/s10706-007-9154-3 · Cited by 475
Alkali activation of Australian slag cements
Bakharev, T., Sanjayan, J. G., & Cheng, Y.-B. (1999) · Cement and Concrete Research · doi:10.1016/s0008-8846(98)00170-7 · Cited by 474
Fall, M., Célestin, J. C., Pokharel, M., & Touré, M. (2010) · Engineering Geology · doi:10.1016/j.enggeo.2010.05.016 · Cited by 473
Design of geopolymer concrete with GGBFS at ambient curing condition using Taguchi method
Hadi, M. N. S., Farhan, N. A., & Sheikh, M. N. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.02.131 · Cited by 431
Strength development in clay–fly ash geopolymer
Sukmak, P., Horpibulsuk, S., & Shen, S.-L. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.11.015 · Cited by 405
Workability and mechanical properties of alkali activated slag concrete
Collins, F. G., & Sanjayan, J. G. (1999) · Cement and Concrete Research · doi:10.1016/s0008-8846(98)00236-1 · Cited by 400
Concrete: An eco material that needs to be improved
Flatt, R. J., Roussel, N., & Cheeseman, C. R. (2012) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2011.11.012 · Cited by 392
An overview of geopolymers derived from industrial by-products
Mehta, A., & Siddique, R. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.09.136 · Cited by 391
Rashad, A. M. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.04.011 · Cited by 387
Production of geopolymeric binder from blended waste concrete powder and fly ash
Ahmari, S., Ren, X., Toufigh, V., & Zhang, L. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.04.044 · Cited by 364
Hydration and properties of sodium sulfate activated slag
Rashad, A. M., Bai, Y., Basheer, P. A. M., Milestone, N. B., & Collier, N. C. (2013) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2012.12.010 · Cited by 335
A study on the setting characteristics of sodium silicate-activated slag pastes
Chang, J. J. (2003) · Cement and Concrete Research · doi:10.1016/s0008-8846(02)01096-7 · Cited by 330
Underground mining methods : engineering fundamentals and international case studies
Hustrulid, W. A., & Bullock, R. C. (2001) · Society for Mining, Metallurgy, and Exploration eBooks · Cited by 296
Rashad, A. M., & Zeedan, S. R. (2011) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2010.12.044 · Cited by 284
Temperature and activator effect on early-age reaction kinetics of alkali-activated slag binders
Gebregziabiher, B. S., Thomas, R. J., & Peethamparan, S. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.03.098 · Cited by 207
Jiang, N.-J., Du, Y.-J., Liu, S.-Y., Wei, M.-L., Horpibulsuk, S., & Arulrajah, A. (2016) · Canadian Geotechnical Journal · doi:10.1139/cgj-2015-0245 · Cited by 198
Alkali activation as new option for gold mine tailings inertization
Kiventerä, J., Lancellotti, I., Catauro, M., Poggetto, F. D., Leonelli, C., & Illikainen, M. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.03.182 · Cited by 198
Yang, L., Yilmaz, E., Li, J., Liu, H., & Jiang, H. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.07.155 · Cited by 197
Self-citationYield stress of cemented paste backfill in sub-zero environments: Experimental results
Haiqiang, J., Fall, M., & Cui, L. (2016) · Minerals Engineering · doi:10.1016/j.mineng.2016.03.014 · Cited by 187
Wang, Y., Fall, M., & Wu, A. (2016) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2016.01.005 · Cited by 168
Collins, F., & Sanjayan, J. (1999) · Cement and Concrete Research · doi:10.1016/s0008-8846(98)00237-3 · Cited by 165
Xia, W., Du, Y., Li, F., Li, C., Yan, X., Arulrajah, A., Wang, F., & Song, D. (2019) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2019.02.031 · Cited by 147
Du, Y., Wu, J., Bo, Y.-L., & Jiang, N. (2019) · Acta Geotechnica · doi:10.1007/s11440-019-00793-y · Cited by 104
Wu, H., Jin, F., Bo, Y.-L., Du, Y., & Zheng, J. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.03.164 · Cited by 101
Preliminary study on combined-alkali–slag paste materials
Li, Y., & Sun, Y. N. (2000) · Cement and Concrete Research · doi:10.1016/s0008-8846(00)00269-6 · Cited by 99
Koohestani, B., Koubaa, A., Belem, T., Bussière, B., & Bouzahzah, H. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.05.118 · Cited by 98
Cristelo, N., Fernández‐Jiménez, A., Vieira, C. S., Miranda, T. F. D. S., & Palomo, A. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.03.057 · Cited by 91
Xia, W., Du, Y., Li, F., Guo, G., Yan, X., Li, C., Arulrajah, A., Wang, F., & Wang, S. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.03.195 · Cited by 77
Benefits of Sealed-Curing on Compressive Strength of Fly Ash-Based Geopolymers
Lee, S., Van Riessen, A., & Chon, C.-M. (2016) · Materials · doi:10.3390/ma9070598 · Cited by 49
Yu, B., Du, Y., Jin, F., & Liu, C. (2016) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0001517 · Cited by 46
Study of alkali activated slag as alternative pavement binder
Sun, Z., Lin, X., Liu, P., Wang, D., Vollpracht, A., & Oeser, M. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.07.154 · Cited by 46
Feng, Y., Du, Y., Reddy, K. R., & Xia, W.-Y. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.09.072 · Cited by 33
Cited by
Feng, Y., Li, F., Qi, W., Ren, Q., Qi, W., Duan, G., Zheng, K., Han, Y., & Pang, H. (2022) · Minerals · doi:10.3390/min12121549 · Cited by 20
Metadata
- Authors
- Jiang, H., Qi, Z., Yilmaz, E., Han, J., Qiu, J., & Dong, C.
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2019-09
- Volume
- 218
- Pages
- 689-700
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W2950172824
- Cited by
- 256
- References
- 49
- FWCI
- 25.79
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.