The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Mix composition and characterisation of one-part geopolymers with different activators
Abstract
Abstract To improve the commercial viability of geopolymers, there is a need to develop one-part geopolymer mixes. In this research, 100% fly ash or a mixture of fly ash and slag was employed as the precursor. Meanwhile, the highly corrosive alkali solutions used as activators in conventional geopolymers were replaced by different solid activators (in powder form), such as sodium silicate, calcium hydroxide, sodium oxide, lithium hydroxide, potassium carbonate or their combinations. The mixes were subjected to both ambient and heat curing to check the influence of curing conditions. Effects of type/combination of the solid activators on the workability, early and final strength, hardened density and microstructure of these one-part geopolymer mixes were examined. The incorporation of slag in the binder increased the early and final strength of mixes but reduced the workability. Furthermore, the type/combination of solid alkaline activators affects the microstructure of the geopolymer gels and subsequently impacts the mechanical properties. Among the investigated ambient cured geopolymers, a relatively high compressive strength of 38 MPa at 28 days was obtained when the geopolymer precursor was composed of 50 wt% fly ash and 50 wt% slag activated by a combination of sodium silicate, calcium hydroxide and lithium hydroxide.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Geopolymer technology: The current state of the art
Duxson, P., Fernández-Jiménez, A., Provis, J. L., Lukey, G. C., Palomo, A., & van Deventer, J. S. J. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0637-z · Cited by 4,742
Ben Haha, M., Le Saout, G., Winnefeld, F., & Lothenbach, B. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.11.016 · Cited by 1,059
Alkali-activated fly ash/slag cements
Puertas, F., Martı́nez-Ramı́rez, S., Alonso, S., & Vázquez, T. (2000) · Cement and Concrete Research · doi:10.1016/s0008-8846(00)00298-2 · Cited by 921
Calorimetric study of alkaline activation of calcium hydroxide-metakaolin solid mixtures
Alonso, S., & Palomo, A. (2001) · Cement and Concrete Research · doi:10.1016/s0008-8846(00)00435-x · Cited by 341
Role of carbonates in the chemical evolution of sodium carbonate-activated slag binders
Bernal, S. A., Provis, J. L., Myers, R. J., San Nicolas, R., & van Deventer, J. S. J. (2015) · Materials and Structures · doi:10.1617/s11527-014-0412-6 · Cited by 334
Recent update on the environmental impact of geopolymers
Habert, G., & Ouellet-Plamondon, C. (2016) · RILEM Technical Letters · doi:10.21809/rilemtechlett.2016.6 · Cited by 330
Cited by
Advances in geopolymer materials: A comprehensive review
Cong, P., & Cheng, Y. (2021) · Journal of Traffic and Transportation Engineering (English Edition) · doi:10.1016/j.jtte.2021.03.004 · Cited by 481
Metadata
- Authors
- Askarian, M., Tao, Z., Samali, B., Adam, G., & Shuaibu, R.
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2019-11
- Volume
- 225
- Pages
- 526-537
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W2962929724
- Cited by
- 182
- References
- 6
- FWCI
- 11.59
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Mix composition and characterisation of one-part geopolymers with different activators. https://app.cochat.ai/papers/10.1016/j.conbuildmat.2019.07.083
- The paper
- Askarian, M., Tao, Z., Samali, B., Adam, G., & Shuaibu, R. (2019). Mix composition and characterisation of one-part geopolymers with different activators. Construction and Building Materials. https://doi.org/10.1016/j.conbuildmat.2019.07.083
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.