The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Physical-mechanical properties of fly ash/GGBFS geopolymer composites with recycled aggregates
Abstract
The properties of fly ash and ground granulated blast furnace slag (GGBFS) combination based geopolymer composites containing recycled aggregate are investigated in this study, which obtained from construction and demolition wastes. The effects of recycled aggregate replacement and GGBFS inclusion on the physical and mechanical properties of geopolymer composites were investigated in this study. The scanning electron microscopic (SEM) were conducted to provide a thorough insight into the characterization of microstructures. The results reveal that using recycled aggregate has an insignificant impact on workability and setting time, while it causes a reduction in physical and mechanical properties. The inclusion of GGBFS reduces workability and setting time. However, improved physical and mechanical properties can be achieved in the geopolymer composites after the incorporation of GGBFS, and this effect is more prominent in the geopolymer composites containing recycled aggregates. The water absorption and sorptivity exhibit a strong correlation with the volume of permeable voids of geopolymer composites. Besides, very good relationships were established between the compressive strength and other mechanical properties, and these relationships fitted reasonably well with the other predictions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Geopolymer technology: The current state of the art
Duxson, P., Fernández-Jiménez, A., Provis, J. L., Lukey, G. C., Palomo, A., & van Deventer, J. S. J. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0637-z · Cited by 4,742
Alkali-activated fly ash/slag cements
Puertas, F., Martı́nez-Ramı́rez, S., Alonso, S., & Vázquez, T. (2000) · Cement and Concrete Research · doi:10.1016/s0008-8846(00)00298-2 · Cited by 921
Durability of Alkali‐Activated Materials: Progress and Perspectives
Bernal, S. A., & Provis, J. L. (2014) · Journal of the American Ceramic Society · doi:10.1111/jace.12831 · Cited by 547
Effects of nanoparticle on the dynamic behaviors of recycled aggregate concrete under impact loading
Li, W., Luo, Z., Long, C., Wu, C., Duan, W. H., & Shah, S. P. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.09.045 · Cited by 180
Self-citation
Cited by
Advances in geopolymer materials: A comprehensive review
Cong, P., & Cheng, Y. (2021) · Journal of Traffic and Transportation Engineering (English Edition) · doi:10.1016/j.jtte.2021.03.004 · Cited by 481
Khalid, M. Y., Arif, Z. U., Ahmed, W., & Arshad, H. (2022) · Sustainable Materials and Technologies · doi:10.1016/j.susmat.2021.e00382 · Cited by 314
Singh, R. P., Vanapalli, K. R., Cheela, V. R. S., Peddireddy, S. R., Sharma, H. B., & Mohanty, B. (2023) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2023.131168 · Cited by 227
Metadata
- Authors
- Hu, Y., Tang, Z., Li, W., Li, Y., & Tam, V. W. Y.
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2019-11
- Volume
- 226
- Pages
- 139-151
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W2965271335
- Cited by
- 239
- References
- 4
- FWCI
- 15.70
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Physical-mechanical properties of fly ash/GGBFS geopolymer composites with recycled aggregates. https://app.cochat.ai/papers/10.1016/j.conbuildmat.2019.07.211
- The paper
- Hu, Y., Tang, Z., Li, W., Li, Y., & Tam, V. W. Y. (2019). Physical-mechanical properties of fly ash/GGBFS geopolymer composites with recycled aggregates. Construction and Building Materials. https://doi.org/10.1016/j.conbuildmat.2019.07.211
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.