Influence of superplasticizers and retarders on the workability and strength of one-part alkali-activated fly ash/slag binders cured at room temperature
The DOI matches its Crossref record; 58 of the 58 references it cites were found in a registry or an index.
Abstract
Abstract One-part alkali-activated fly ash/slag binders have been promoted as an environmentally friendlier alternative to Ordinary Portland Cement (OPC). However, its tendency towards flash setting and high sensitivity of the mixture’s strength to water content have been sources of major concern in the industry. This study investigates the effects of different w/b ratios, admixtures (such as superplasticizers and/or retarders) and the dosage of the selected admixture on the fresh and hardened properties of one-part alkali activated fly ash/slag based binders. To evaluate the fresh properties of binders, setting time and flowability tests were carried out. The compressive and flexural strength tests were conducted to determine the mechanical strength of the samples. The mineralogy and microstructure of the samples were studied using X-ray diffraction (XRD) and scanning electron microscope (SEM) in conjunction with energy dispersive spectroscopy (EDS) which was used to observe the elemental composition. Additionally, an optical microscope was also used to study the surficial physical properties of the hardened binders. The experimental results showed that an increase in w/b ratio led to an improvement in fresh properties of binder but significantly decreased the mechanical strength. A w/b ratio of 0.3 was deemed to be optimal in this study because at this ratio the hardened samples showed no surficial cracking and had enough compressive strength to be viable as a construction material. Test results also showed borax to be superior to all the other admixtures tested when both mechanical strength and workability are considered.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Carbon dioxide equivalent (CO2-e) emissions: A comparison between geopolymer and OPC cement concrete
Turner, L. K., & Collins, F. G. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.01.023 · Cited by 2,411
New cements for the 21st century: The pursuit of an alternative to Portland cement
Shi, C., Jiménez, A. F., & Palomo, A. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.03.016 · Cited by 1,691
Global CO 2 emissions from cement production
Andrew, R. M. (2018) · Earth System Science Data · doi:10.5194/essd-10-195-2018 · Cited by 1,583
One-part alkali-activated materials: A review
Luukkonen, T., Abdollahnejad, Z., Yliniemi, J., Kinnunen, P., & Illikainen, M. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.10.001 · Cited by 1,456
Ismail, I., Bernal, S. A., Provis, J. L., San Nicolas, R., Hamdan, S., & van Deventer, J. S. J. (2014) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2013.09.006 · Cited by 1,317
Yip, C. K., Lukey, G. C., & van Deventer, J. S. J. (2005) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.10.042 · Cited by 1,274
On the Development of Fly Ash-Based Geopolymer Concrete
(2004) · ACI Materials Journal · doi:10.14359/13485 · Cited by 1,254
Resistance of geopolymer materials to acid attack
Bakharev, T. (2005) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.06.005 · Cited by 1,109
Hydration products of alkali activated slag cement
Wang, S.-D., & Scrivener, K. L. (1995) · Cement and Concrete Research · doi:10.1016/0008-8846(95)00045-e · Cited by 997
Effect of elevated temperatures on geopolymer paste, mortar and concrete
Kong, D. L. Y., & Sanjayan, J. G. (2010) · Cement and Concrete Research · doi:10.1016/j.cemconres.2009.10.017 · Cited by 985
Cited by
A review: Reaction mechanism and strength of slag and fly ash-based alkali-activated materials
Sun, B., Ye, G., & de Schutter, G. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.126843 · Cited by 386
One part alkali activated materials: A state-of-the-art review
Elzeadani, M., Bompa, D. V., & Elghazouli, A. Y. (2022) · Journal of Building Engineering · doi:10.1016/j.jobe.2022.104871 · Cited by 180
“SEM images of aluminosilicate precursors: Class F FA [42] , Class C FA [90] , GGBS [124] , NS [31] , LS [23] , SF [164] , SR [39] , GS [209] , WG [164] , phyllite dust [139] , RHA [34] , pumice [70] , Volcanic tuff [67] , Volcanic ash [72] , VT [49] , Kaolin [210] , MK [210] , GMT [45] , LZMT [48]…”
BackgroundMethodInfluential
Metadata
- Authors
- Oderji, S. Y., Chen, B., Shakya, C., Ahmad, M. R., & Shah, S. F. A.
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2019-12
- Volume
- 229
- Pages
- 116891
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W2972831570
- Cited by
- 178
- References
- 58
- FWCI
- 11.21
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.