High-temperature rheological behavior and fatigue performance of lignin modified asphalt binder
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
The objective of this study was to introduce lignin as a bio-additive to modify the base asphalt and investigate the high-temperature rheological performances of lignin modified asphalts and virgin asphalt. In this study, asphalt PG 58-28 was selected as the virgin asphalt, and four contents, 2%, 4%, 6% and 8%, of the total binder by weight of lignin were incorporated in the base binder. Rotational viscosity (RV), dynamic shear rheometer (DSR), and multiple stress creep recovery (MSCR) tests were conducted to characterize the rheological performances of different types of asphalts. Linear amplitude sweep (LAS) test was employed to evaluate the fatigue performance. The results showed that the incorporation of lignin increased the viscosity of virgin asphalt at different rotational speeds. The activation energy showed an increasing trend as the lignin increased compared with the virgin asphalt. Meanwhile, the lignin incorporated into the asphalt binder increased the elastic components, and improved the resistance of asphalt binder to the permanent deformation regardless of the lignin contents. The addition of lignin in the asphalt binder could retard oxidation reactions that occurred in the asphalt during the rolling thin film oven aging. In addition, the incorporation of lignin may degrade the fatigue life of asphalt. However, when the content of lignin was less than 8%, the reduction was small. This study could provide a prospective foundation for the utilization of lignin extracted from waste biomass as an exceptional and renewable bio-additive in the field of asphalt pavement engineering.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Catalytic Transformation of Lignin for the Production of Chemicals and Fuels
Li, C., Zhao, X., Wang, A., Huber, G. W., & Zhang, T. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00155 · Cited by 2,951
Characterisation of structure-dependent functional properties of lignin with infrared spectroscopy
Boeriu, C. G., Bravo, D., Gosselink, R. J. A., & van Dam, J. E. G. (2004) · Industrial Crops and Products · doi:10.1016/j.indcrop.2004.04.022 · Cited by 1,002
A review of the chemical and physical mechanisms of the storage stability of fast pyrolysis bio-oils
Diebold, J. P. (1999) · doi:10.2172/753818 · Cited by 549
Cited by
The role of lignin and lignin-based materials in sustainable construction – A comprehensive review
Jędrzejczak, P., Collins, M. N., Jesionowski, T., & Klapiszewski, Ł. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.07.125 · Cited by 339
Metadata
- Authors
- Gao, J., Wang, H., Liu, C., Ge, D., You, Z., & Yu, M.
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2020-01
- Volume
- 230
- Pages
- 117063
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W2977226848
- Cited by
- 208
- References
- 3
- FWCI
- 14.02
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: High-temperature rheological behavior and fatigue performance of lignin modified asphalt binder. https://app.cochat.ai/papers/10.1016/j.conbuildmat.2019.117063
- The paper
- Gao, J., Wang, H., Liu, C., Ge, D., You, Z., & Yu, M. (2020). High-temperature rheological behavior and fatigue performance of lignin modified asphalt binder. Construction and Building Materials. https://doi.org/10.1016/j.conbuildmat.2019.117063
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.