Loess stabilization using cement, waste phosphogypsum, fly ash and quicklime for self-compacting rammed earth construction
The DOI matches its Crossref record.
Abstract
Abstract Loess is green building material according with contemporary call for sustainable development. This paper works on the using of cement, waste phosphogypsum, fly ash and quicklime for loess stabilization. The unconfined compressive strengths of air curing samples with different contents of the mentioned four materials were studied, respectively. An orthogonal test was used to evaluate the effects of additives on softening coefficient, flexural and compressive strength of stabilized samples with 55 °C curing temperature. Effects of curing temperature ranging from 15 °C to 85 °C on strength and water-resistance were investigated. And the microstructure of the samples was analyzed by SEM observation. The experimental results revealed that samples with mix proportion of 100% loess, 10% cement, 3% PG, 20% FA and 8% quicklime obtained a high compressive strength of 18.64 MPa at 3d and a softening coefficient over 0.9. Curing temperature had a significant improvement on loess stabilization. Microstructural analysis results showed the formation of ettringite and C-S-H gels in the cementitious system, which was consistent with macro-mechanical properties.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Julphunthong, P., Joyklad, P., Manprom, P., Chompoorat, T., Palou, M.-T., & Suriwong, T. (2024) · Scientific Reports · doi:10.1038/s41598-024-51326-x · Cited by 85
Metadata
- Authors
- Gu, K., & Chen, B.
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2020-01
- Volume
- 231
- Pages
- 117195
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W2979868871
- Cited by
- 220
- References
- 0
- FWCI
- 17.25
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Loess stabilization using cement, waste phosphogypsum, fly ash and quicklime for self-compacting rammed earth construction. https://app.cochat.ai/papers/10.1016/j.conbuildmat.2019.117195
- The paper
- Gu, K., & Chen, B. (2020). Loess stabilization using cement, waste phosphogypsum, fly ash and quicklime for self-compacting rammed earth construction. Construction and Building Materials. https://doi.org/10.1016/j.conbuildmat.2019.117195
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.