Optimization and characterization of high-volume limestone powder in sustainable ultra-high performance concrete
Open accessThe DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
This paper aims to optimize high-volume limestone powder in sustainable ultra-high performance concrete (UHPC), and characterize its roles on plasticization effect, hydration kinetics, microstructure and hardened properties. The spread flow, hydration products, compressive strength, porosity and pore structure, shrinkage, embedded CO2 emission and unit cost are investigated with different substitution levels of binders by limestone powder, varying from 0 to 80 vol%. Results show that replacing high volume of binders by limestone powder is an efficient way to develop eco-friendly and low-cost UHPC. Limestone powder shows a positive mineral plasticization effect that should be considered in designing UHPC. The degree of secondary pozzolanic hydration is more intensive than C3S/C2S hydration, which can enhance the later-age strength development potential. An appropriate content of limestone powder can contribute to a higher strength, denser pore structure, diminished total free shrinkage and higher sustainability efficiency. The optimum content of limestone powder appears to be 50 vol% of the total powder content in UHPC.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Adsorption of Gases in Multimolecular Layers
Brunauer, S., Emmett, P. H., & Teller, E. (1938) · Journal of the American Chemical Society · doi:10.1021/ja01269a023 · Cited by 28,156
Supplementary cementitious materials
Lothenbach, B., Scrivener, K., & Hooton, R. D. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.12.001 · Cited by 3,406
Monteiro, P. J. M., Miller, S. A., & Horvath, A. (2017) · Nature Materials · doi:10.1038/nmat4930 · Cited by 1,454 · cited 1×
“87–1 ton CO2, and the whole cement industry contributes to around 8–9% of the anthropogenic CO2 and 2–3% (4–5 GJ/ton) energy consumption [13,14].”
BackgroundLimestone and silica powder replacements for cement: Early-age performance
Bentz, D. P., Ferraris, C. F., Jones, S. Z., Lootens, D., & Zunino, F. (2017) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.01.001 · Cited by 255 · cited 2×
“Meanwhile, the limestone powder can be somewhat soluble and conduce to preferably form the carboaluminate rather than monosulfate [32,37].”
Background
Cited by
New development of ultra-high-performance concrete (UHPC)
Du, J., Meng, W., Khayat, K. H., Bao, Y., Guo, P., Lyu, Z., Abu-obeidah, A., Nassif, H., & Wang, H. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.109220 · Cited by 1,013
Microstructure of ultra-high-performance concrete (UHPC) – A review study
Bahmani, H., & Mostofinejad, D. (2022) · Journal of Building Engineering · doi:10.1016/j.jobe.2022.104118 · Cited by 268
Metadata
- Authors
- Li, P. P., Brouwers, H. J. H., Chen, W., & Yu, Q.
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2020-05
- Volume
- 242
- Pages
- 118112
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W2998266888
- Cited by
- 226
- References
- 4
- FWCI
- 13.98
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Optimization and characterization of high-volume limestone powder in sustainable ultra-high performance concrete. https://app.cochat.ai/papers/10.1016/j.conbuildmat.2020.118112
- The paper
- Li, P. P., Brouwers, H. J. H., Chen, W., & Yu, Q. (2020). Optimization and characterization of high-volume limestone powder in sustainable ultra-high performance concrete. Construction and Building Materials. https://doi.org/10.1016/j.conbuildmat.2020.118112
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.