The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Study of a novel ceramsite-based shape-stabilized composite phase change material (PCM) for energy conservation in buildings
Abstract
Abstract Building envelope with phase change material (PCM) embedded is able to optimize the thermal utilization and reduce energy consumption in buildings. However, the leakage of molten PCM, the low thermal performances (latent heat and thermal conductivity) and the inappropriate melting temperature limit the application of PCM in buildings. This work aims to propose a novel shape-stabilized composite PCM with encouraging thermal performances and effective encapsulation for applying to the building envelope. Firstly, a binary PCM with appropriate thermal properties for buildings was studied by using lauryl alcohol, stearic acid and nanoparticles, marked as LA-SA/Al2O3. Then this prepared LA-SA/Al2O3 was absorbed into ceramsite and encapsulated by styrene-acrylic emulsion and dry cement powder for shape-stability, a ceramsite-based PCM (LA-SA/Al2O3/C) was formed. Finally, the thermal-physical performances of the mixture of LA-SA/Al2O3/C and concrete were tested. The thermal performances of LA-SA/Al2O3 and LA-SA/Al2O3/C were measured by differential scanning calorimetry (DSC), the chemical and thermal stabilities were tested by Fourier transform infrared (FT-IR) and thermogravimetric (TG). Results show that the optimal proportion for LA-SA/Al2O3 is 82 wt% LA + 18 wt% SA with 0.5 wt% Al2O3 nanoparticle, for which the melting temperature and latent heat are 21.3 °C and 205.9 kJ/kg respectively. The LA-SA/Al2O3/C has the ability to prevent the leakage of PCM, owning the excellent melting latent heat of 133.4 kJ/kg, which is relatively high comparing with the values in other references. The concrete based-CPCM with 15% LA-SA/Al2O3/C embedded shows satisfied mechanical performance and has great potential to reduce the indoor temperature fluctuation caused by outdoor ambient, and cut down the energy consumptions of heating and cooling devices in buildings.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Zhang, X., Wen, R., Huang, Z., Tang, C., Huang, Y., Liu, Y., Fang, M., Wu, X., Min, X., & Xu, Y. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.05.037 · Cited by 189
Cited by
Latent thermal energy storage technologies and applications: A review
Jouhara, H., Żabnieńska-Góra, A., Khordehgah, N., Ahmad, D., & Lipinski, T. (2020) · International Journal of Thermofluids · doi:10.1016/j.ijft.2020.100039 · Cited by 543
Wang, X., Li, W., Luo, Z., Wang, K., & Shah, S. P. (2022) · Energy and Buildings · doi:10.1016/j.enbuild.2022.111923 · Cited by 493
Rathore, P. K. S., & Shukla, S. K. (2021) · Energy and Buildings · doi:10.1016/j.enbuild.2021.110799 · Cited by 344
Singh, P., Sharma, R. K., Ansu, A. K., Goyal, R., Sarı, A., & Tyagi, V. V. (2021) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2020.110955 · Cited by 327
Yu, K., Liu, Y., & Yang, Y. (2021) · Applied Energy · doi:10.1016/j.apenergy.2021.116845 · Cited by 278
Self-citation
Metadata
- Authors
- Yang, Y., Wu, W., Fu, S., & Zhang, H.
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2020-06
- Volume
- 246
- Pages
- 118479
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W3008189409
- Cited by
- 159
- References
- 1
- FWCI
- 10.77
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Study of a novel ceramsite-based shape-stabilized composite phase change material (PCM) for energy conservation in buildings. https://app.cochat.ai/papers/10.1016/j.conbuildmat.2020.118479
- The paper
- Yang, Y., Wu, W., Fu, S., & Zhang, H. (2020). Study of a novel ceramsite-based shape-stabilized composite phase change material (PCM) for energy conservation in buildings. Construction and Building Materials. https://doi.org/10.1016/j.conbuildmat.2020.118479
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.