The DOI matches its Crossref record; 175 of the 175 references it cites were found in a registry or an index.
Enhanced thermophysical properties of organic PCM through shape stabilization for thermal energy storage in buildings: A state of the art review
Abstract
Abstract Thermal energy storage using organic Phase Change Material (PCM) can play an important role in effective thermal management of the building. Organic PCM are widely utilized to regulate the indoor thermal environment of the building because of good chemical and thermal stability, high heat of fusion, and large availability in the required temperature range. However, organic phase change material suffers from problems like low thermal conductivity and leakage during phase transition which limits there applicability in buildings. Therefore, the appropriate approach of preparing Shape Stabilized Composite Phase Change Material (ss-CPCM) with high thermal conductivity and no leakage will significantly improve the thermo-physical properties and increases the applicability of the organic PCM in buildings. This review is an attempt to investigate the effectiveness of organic PCM as ss-CPCM with a specific focus on its applicability in regulating the indoor thermal behavior of the buildings. It discusses in brief about thermal energy storage in buildings, PCM with emphasis on organic PCM, and shape stabilized PCM. In details, it analyzes various porous support materials and their effect on thermo-physical properties of organic PCM. Additionally, a detailed investigation of various types of nanoparticles used to enhance the thermo-physical characteristics of ss-CPCM was conducted. The study suggests that ss-CPCM has the potential to improve the thermal conductivity, minimize the leakage, and effectively regulate the indoor temperature by reducing the peak temperature and increasing the time delay. However, reduction in heat storage capacity of ss-CPCM needs to be critically analyzed. Additionally, factors like real time studies in buildings, annual/seasonal analysis, heat management from ss-CPCM during night, and techno-economic analysis of using ss-CPCM in building envelope need to be addressed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Review on thermal energy storage with phase change materials (PCMs) in building applications
Zhou, D., Zhao, C. Y., & Tian, Y. (2012) · Applied Energy · doi:10.1016/j.apenergy.2011.08.025 · Cited by 1,896
Materials used as PCM in thermal energy storage in buildings: A review
Cabeza, L. F., Castell, A., Barreneche, C., de Gracia, A., & Fernández, A. I. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2010.11.018 · Cited by 1,889
Gil, A., Medrano, M., Martorell, I., Lázaro, A., Dolado, P., Zalba, B., & Cabeza, L. F. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.07.035 · Cited by 1,762
Heating and cooling energy trends and drivers in buildings
Ürge-Vorsatz, D., Cabeza, L. F., Serrano, S., Barreneche, C., & Petrichenko, K. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.08.039 · Cited by 1,089
Pereira da Cunha, J., & Eames, P. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.05.097 · Cited by 1,080
A review on phase change material (PCM) for sustainable passive cooling in building envelopes
Akeiber, H., Nejat, P., Majid, M. Z. A., Wahid, M. A., Jomehzadeh, F., Zeynali Famileh, I., Calautit, J. K., Hughes, B. R., & Zaki, S. A. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.03.036 · Cited by 1,075
Thermal conductivity enhancement on phase change materials for thermal energy storage: A review
Wu, S., Yan, T., Kuai, Z., & Pan, W. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2019.10.010 · Cited by 962
Umair, M. M., Zhang, Y., Iqbal, K., Zhang, S., & Tang, B. (2019) · Applied Energy · doi:10.1016/j.apenergy.2018.11.017 · Cited by 852
Khan, Z., Khan, Z., & Ghafoor, A. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.02.045 · Cited by 765
Huang, X., Chen, X., Li, A., Atinafu, D., Gao, H., Dong, W., & Wang, G. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.09.013 · Cited by 701
Cited by
Hassan, F., Jamil, F., Hussain, A., Ali, H. M., Janjua, M. M., Khushnood, S., Farhan, M., Altaf, K., Said, Z., & Li, C. (2022) · Sustainable Energy Technologies and Assessments · doi:10.1016/j.seta.2021.101646 · Cited by 283
Metadata
- Authors
- Rathore, P. K. S., & Shukla, S. K.
- Venue
- Energy and Buildings
- Publisher
- Elsevier BV
- Published
- 2021-04
- Volume
- 236
- Pages
- 110799
- ISSN
- 0378-7788 (ISSN-L)
- OpenAlex
- W3129119672
- Cited by
- 344
- References
- 175
- FWCI
- 23.66
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Enhanced thermophysical properties of organic PCM through shape stabilization for thermal energy storage in buildings: A state of the art review. https://app.cochat.ai/papers/10.1016/j.enbuild.2021.110799
- The paper
- Rathore, P. K. S., & Shukla, S. K. (2021). Enhanced thermophysical properties of organic PCM through shape stabilization for thermal energy storage in buildings: A state of the art review. Energy and Buildings. https://doi.org/10.1016/j.enbuild.2021.110799
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.