The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
The effect of nanomaterials on properties of geopolymers derived from industrial by-products: A state-of-the-art review
Abstract
Abstract Nanomaterials, owing to their extraordinary properties are known to improve the microstructure of concrete, enhances the fresh and hardened properties of cement concrete, are widely used in cementitious materials. Many studies have been conducted so far to understand the effects of inclusion of nanomaterials on the geopolymerisation reaction, fresh and hardened state properties, microstructure, and durability of geopolymer composites. The current paper summarizes these studies mainly focusing on the effects of various nanomaterials such as nano-SiO2, nano-Al2O3, nano-TiO2, carbon nanotubes and nano-clay on geopolymer paste, mortar and concrete derived from various industrial by-products as sources of aluminosilicates. Most of the geopolymer products revealed that nanomaterials enhance the fresh and hardened state properties if used in a controlled quantity. Nano-silica and nano clay inclusion up to 2% by weight significantly enhances the rate of geopolymerisation reaction, reduces the setting times and improves the hardened state properties. Carbon nanotubes and nano-TiO2 enhances geopolymerisation by offering additional nucleation sites. Nano-alumina more prominently reduces the porosity but lesser effective in geopolymerisation. X-ray diffraction studies report the increase in XRD peaks indicating the formation of additional hydration products that comply with SEM studies. Investigation of SEM and FTIR reveals that the inclusion of nanomaterials densify the microstructure of geopolymer composites and produce high mechanical strength. Durability studies reveal that enhanced geopolymerisation with nanomaterials also prevents interconnectivity of micropores due to the formation of a denser matrix of geopolymer gel. The possible health-related issues associated with the use of nanomaterials has also been identified. The cost effectiveness of using nanomaterials is also discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Geopolymer technology: The current state of the art
Duxson, P., Fernández-Jiménez, A., Provis, J. L., Lukey, G. C., Palomo, A., & van Deventer, J. S. J. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0637-z · Cited by 4,742
Lee, J., Mahendra, S., & Alvarez, P. J. J. (2010) · ACS Nano · doi:10.1021/nn100866w · Cited by 750
Hydration and properties of nano-TiO2 blended cement composites
Chen, J., Kou, S.-C., & Poon, C.-S. (2012) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2012.02.009 · Cited by 518
Cited by
Advances in geopolymer materials: A comprehensive review
Cong, P., & Cheng, Y. (2021) · Journal of Traffic and Transportation Engineering (English Edition) · doi:10.1016/j.jtte.2021.03.004 · Cited by 481
Durability Performance of Geopolymer Concrete: A Review
Wong, L. S. (2022) · Polymers · doi:10.3390/polym14050868 · Cited by 380
Zhang, C., Khorshidi, H., Najafi, E., & Ghasemi, M. (2023) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2022.135390 · Cited by 300
John, S. K., Nadir, Y., & Girija, K. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.122443 · Cited by 290
Geopolymers in construction - recent developments
Nawaz, M., Heitor, A., & Sivakumar, M. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.120472 · Cited by 268
Metadata
- Authors
- Jindal, B. B., & Sharma, R.
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2020-08
- Volume
- 252
- Pages
- 119028
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W3020299543
- Cited by
- 161
- References
- 3
- FWCI
- 12.23
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The effect of nanomaterials on properties of geopolymers derived from industrial by-products: A state-of-the-art review. https://app.cochat.ai/papers/10.1016/j.conbuildmat.2020.119028
- The paper
- Jindal, B. B., & Sharma, R. (2020). The effect of nanomaterials on properties of geopolymers derived from industrial by-products: A state-of-the-art review. Construction and Building Materials. https://doi.org/10.1016/j.conbuildmat.2020.119028
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.