The DOI matches its Crossref record; 68 of the 68 references it cites were found in a registry or an index.
Durability of ultra-high performance concrete – A review
Abstract
Abstract Ultra-high performance concrete (UHPC) is more durable than conventional concrete (CC) and high-performance concrete (HPC) owing to the use of low water-to-binder ratio (W/B) of approximately 0.2 and high amount of fine particles. It is an innovative composite material that can serve as a potential candidate for concrete structures exposing to aggressive environments. A comprehensive investigation of the durability characteristics of UHPC is essential to provide fundamental information for material testing requirements and procedures and expand its practical applications. This paper reviews the durability of UHPC in terms of water and chloride-ion permeability, corrosion of steel reinforcement, carbonation, freeze–thaw resistance, chemical attack resistance, alkali-silica reaction, abrasion resistance, and fire resistance. Influential factors, including W/B, curing regime, steel fiber volume, fiber hybridization, specimen size, and testing age, were considered. It is obvious that: (1) UHPC has very low permeability to water and chemical substance, which is about one to two orders of magnitude lower than that of CC and HPC; (2) Carbonation rarely happens on UHPC, either under standard curing or heat curing, after 1 to 3 years exposure. (3) Corrosion of steel reinforcement and alkali-silica reaction are not concerns for UHPC under any curing regime due to its low permeability. (4) UHPC is found to gain increases in mass, strength, and relative dynamic modulus over hundreds of freeze–thaw cycles. (5) Compared to CC and HPC, UHPC is more prone to explosive spalling due to the increase in vapor pressure and non-uniform thermal gradient. Partly or completely filled micro-cracks by carbonation and/or continued hydration of cement are beneficial to improving the mechanical strength and microstructure of UHPC. Hybridization of steel and polypropylene fibers is an efficient approach to mitigate the explosive spalling of UHPC.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Composition of reactive powder concretes
Richard, P., & Cheyrezy, M. (1995) · Cement and Concrete Research · doi:10.1016/0008-8846(95)00144-2 · Cited by 2,358
A review on ultra high performance concrete: Part I. Raw materials and mixture design
Shi, C., Wu, Z., Xiao, J., Wang, D., Huang, Z., & Fang, Z. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.10.088 · Cited by 1,392
Self-citationMix design and properties assessment of Ultra-High Performance Fibre Reinforced Concrete (UHPFRC)
Yu, R., Spiesz, P., & Brouwers, H. J. H. (2014) · Cement and Concrete Research · doi:10.1016/j.cemconres.2013.11.002 · Cited by 1,149
FERNANDEZBERTOS, M., SIMONS, S., HILLS, C., & CAREY, P. (2004) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2004.04.019 · Cited by 1,079
Material Property Characterization of Ultra-High Performance Concrete
Graybeal, B. A. (2006) · ROSA P · Cited by 1,010
Mechanical properties of ultra-high-performance fiber-reinforced concrete: A review
Yoo, D.-Y., & Banthia, N. (2016) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2016.08.001 · Cited by 1,008
A review on ultra high performance concrete: Part II. Hydration, microstructure and properties
Wang, D., Shi, C., Wu, Z., Xiao, J., Huang, Z., & Fang, Z. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.08.095 · Cited by 924
Self-citationChloride binding of cement-based materials subjected to external chloride environment – A review
Yuan, Q., Shi, C., De Schutter, G., Audenaert, K., & Deng, D. (2009) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2008.02.004 · Cited by 803
Self-citationEffect of fire on concrete and concrete structures
Khoury, G. A. (2000) · Progress in Structural Engineering and Materials · doi:10.1002/pse.51 · Cited by 802
Papadakis, V. G. (2000) · Cement and Concrete Research · doi:10.1016/s0008-8846(99)00249-5 · Cited by 713
Yu, R., Spiesz, P., & Brouwers, H. J. H. (2015) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2014.09.024 · Cited by 704
Yu, R., Spiesz, P., & Brouwers, H. J. H. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.04.063 · Cited by 630
Internal curing by superabsorbent polymers in ultra-high performance concrete
Justs, J., Wyrzykowski, M., Bajare, D., & Lura, P. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.05.005 · Cited by 602
The presentation of the chloride threshold level for corrosion of steel in concrete
Glass, G. K., & Buenfeld, N. R. (1997) · Corrosion Science · doi:10.1016/s0010-938x(97)00009-7 · Cited by 573
Ghafari, E., Costa, H., Júlio, E., Portugal, A., & Durães, L. (2014) · Materials & Design · doi:10.1016/j.matdes.2014.02.051 · Cited by 469
Wu, Z., Shi, C., & Khayat, K. H. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.107021 · Cited by 454
Self-citationA study of the effect of chloride binding on service life predictions
Martín‐Pérez, B., Zibara, H., Hooton, R. D., & Thomas, M. D. (2000) · Cement and Concrete Research · doi:10.1016/s0008-8846(00)00339-2 · Cited by 436
Reactive Powder Concretes With High Ductility and 200 - 800 Mpa Compressive Strength
(1994) · "SP-144: Concrete Technology: Past, Present, and Future" · doi:10.14359/4536 · Cited by 436
Tayeh, B. A., Abu Bakar, B. H., Megat Johari, M. A., & Voo, Y. L. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.06.013 · Cited by 435
Wu, Z., Shi, C., & Khayat, K. H. (2016) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2016.05.005 · Cited by 431
Self-citationHydration and microstructure of ultra high performance concrete incorporating rice husk ash
Van Tuan, N., Ye, G., van Breugel, K., & Copuroglu, O. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.06.009 · Cited by 412
Microstructural analysis of RPC (Reactive Powder Concrete)
Cheyrezy, M., Maret, V., & Frouin, L. (1995) · Cement and Concrete Research · doi:10.1016/0008-8846(95)00143-z · Cited by 410
Preparation of Ultra-High Performance Concrete with common technology and materials
Wang, C., Yang, C., Liu, F., Wan, C., & Pu, X. (2012) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2011.11.005 · Cited by 391
Odler, I., & Rößler, M. (1985) · Cement and Concrete Research · doi:10.1016/0008-8846(85)90113-9 · Cited by 387
Chen, B., & Liu, J. (2004) · Cement and Concrete Research · doi:10.1016/j.cemconres.2003.11.010 · Cited by 375
Yoo, D.-Y., & Yoon, Y.-S. (2016) · International Journal of Concrete Structures and Materials · doi:10.1007/s40069-016-0143-x · Cited by 331
Chan, Y. N., Luo, X., & Sun, W. (2000) · Cement and Concrete Research · doi:10.1016/s0008-8846(99)00240-9 · Cited by 327
Effects of silica powder and cement type on durability of ultra high performance concrete (UHPC)
Alkaysi, M., El-Tawil, S., Liu, Z., & Hansen, W. (2016) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2015.11.005 · Cited by 323
Wu, Z., Khayat, K. H., & Shi, C. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.105786 · Cited by 317
Self-citationYazıcı, H. (2007) · Building and Environment · doi:10.1016/j.buildenv.2006.03.013 · Cited by 312
Rong, Z., Sun, W., Xiao, H., & Jiang, G. (2014) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2014.11.001 · Cited by 310
Tai, Y.-S., Pan, H.-H., & Kung, Y.-N. (2011) · Nuclear Engineering and Design · doi:10.1016/j.nucengdes.2011.04.008 · Cited by 292
Durability of an Ultrahigh-Performance Concrete
Graybeal, B., & Tanesi, J. (2007) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)0899-1561(2007)19:10(848 · Cited by 291
Li, Y., Tan, K. H., & Yang, E.-H. (2019) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.11.009 · Cited by 281
Xie, T., Fang, C., Mohamad Ali, M. S., & Visintin, P. (2018) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.05.009 · Cited by 279
El-Dieb, A. S. (2009) · Materials & Design · doi:10.1016/j.matdes.2009.04.024 · Cited by 268
Microstructural investigation of innovative UHPC
Reda, M. M., Shrive, N. G., & Gillott, J. E. (1999) · Cement and Concrete Research · doi:10.1016/s0008-8846(98)00225-7 · Cited by 264
"Ultra-High-Performance Concrete: Research, Development and Application in Europe"
Schmidt, M., & Fehling, E. (2005) · International Symposium on the Utilization of High-Strength/High-Performance Concrete · doi:10.14359/14460 · Cited by 263
A preliminary study of reactive powder concrete as a new repair material
Lee, M.-G., Wang, Y.-C., & Chiu, C.-T. (2007) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2005.06.024 · Cited by 263
Experimental Study of Durability of Reactive Powder Concretes
Roux, N., Andrade, C., & Sanjuan, M. A. (1996) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)0899-1561(1996)8:1(1 · Cited by 262
Rashad, A. M., Bai, Y., Basheer, M., Collier, N. C., & Milestone, N. B. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.10.007 · Cited by 262
Angst, U. M., Elsener, B., Larsen, C. K., & Vennesland, Ø. (2011) · Corrosion Science · doi:10.1016/j.corsci.2011.01.025 · Cited by 261
Preparation of C200 green reactive powder concrete and its static–dynamic behaviors
Yunsheng, Z., Wei, S., Sifeng, L., Chujie, J., & Jianzhong, L. (2008) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2008.06.008 · Cited by 254
High temperature and residual properties of reactive powder concrete – A review
Abid, M., Hou, X., Zheng, W., & Hussain, R. R. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.04.083 · Cited by 254
Self healing of high strength concrete after deterioration by freeze/thaw
Jacobsen, S., & Sellevold, E. J. (1996) · Cement and Concrete Research · doi:10.1016/0008-8846(95)00179-4 · Cited by 239
Wu, Z., Shi, C., & Khayat, K. H. (2018) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.11.014 · Cited by 235
Self-citationDurability of the Ultra High Performances Concrete containing metakaolin
Tafraoui, A., Escadeillas, G., & Vidal, T. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.02.169 · Cited by 231
Using glass sand as an alternative for quartz sand in UHPC
Soliman, N. A., & Tagnit-Hamou, A. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.03.187 · Cited by 228
Assessing drying shrinkage and water permeability of reactive powder concrete produced in Hong Kong
Tam, C. M., Tam, V. W. Y., & Ng, K. M. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2011.05.006 · Cited by 223
Development of ultra-high performance concrete with high fire resistance
Liang, X., Wu, C., Su, Y., Chen, Z., & Li, Z. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.05.241 · Cited by 207
High temperature behaviour of hybrid steel–PVA fibre reinforced reactive powder concrete
Sanchayan, S., & Foster, S. J. (2016) · Materials and Structures · doi:10.1617/s11527-015-0537-2 · Cited by 196
Fire performance of high-strength concrete: a report of the state-of-the-art
Phan, L. T. (1996) · doi:10.6028/nist.ir.5934 · Cited by 191
Investigation of hydration and pozzolanic reaction in Reactive Powder Concrete (RPC) using 29Si NMR
Zanni, H., Cheyrezy, M., Maret, V., Philippot, S., & Nieto, P. (1996) · Cement and Concrete Research · doi:10.1016/0008-8846(95)00197-2 · Cited by 178
Poupard, O., Aït‐Mokhtar, A., & Dumargue, P. (2003) · Cement and Concrete Research · doi:10.1016/j.cemconres.2003.11.009 · Cited by 163
Utilization of Ultra-high Performance Fibre Concrete (UHPFC) for Rehabilitation – A Review
Tayeh, B. A., Bakar, B. H. A., Johari, M. A. M., et al. (2013) · Procedia Engineering · doi:10.1016/j.proeng.2013.03.048 · Cited by 156
Mechanical Properties and Durability of Ultra-High-Performance Concrete
Magureanu, C., Şosa, I., Negrutiu, C. M., et al. (2012) · ACI Materials Journal · doi:10.14359/51683704 · Cited by 146
Chen, Y., Yu, R., Wang, X., et al. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.03.210 · Cited by 144
Effect of steel fibers with galvanized coatings on corrosion of steel bars embedded in UHPC
Fan, L., Meng, W., Teng, L., et al. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.107445 · Cited by 122
Optimization of Mechanical Properties and Durability of Reactive Powder Concrete
Shaheen, E., & Shrive, N. G. (2006) · ACI Materials Journal · doi:10.14359/18222 · Cited by 110
El-Turki, A., Ball, R. J., & Allen, G. C. (2007) · Cement and Concrete Research · doi:10.1016/j.cemconres.2007.05.002 · Cited by 104
Li, H., & Liu, G. (2016) · International Journal of Concrete Structures and Materials · doi:10.1007/s40069-016-0125-z · Cited by 96
Sulfate Resistance of Alkali Activated Pozzolans
Bondar, D., Lynsdale, C. J., Milestone, N. B., & Hassani, N. (2014) · International Journal of Concrete Structures and Materials · doi:10.1007/s40069-014-0093-0 · Cited by 91
Qiu, J., Lim, X.-N., & Yang, E. (2016) · Cement and Concrete Research · doi:10.1016/j.cemconres.2016.08.021 · Cited by 79
Effect of Fiber Hybridization on Durability Related Properties of Ultra-High Performance Concrete
Smarzewski, P., & Barnat-Hunek, D. (2017) · International Journal of Concrete Structures and Materials · doi:10.1007/s40069-017-0195-6 · Cited by 74
Standard Practice for Fabricating and Testing Specimens of Ultra-High Performance Concrete
C09 Committee (2019) · doi:10.1520/c1856_c1856m · Cited by 72
Controlled rate thermal treatment of reactive powder concretes
Feylessoufi, A., Crespin, M., Dion, P., et al. (1997) · Advanced Cement Based Materials · doi:10.1016/s1065-7355(97)90002-x · Cited by 50
PREPARATION AND DURABILITY OF A HIGH PERFORMANCE CONCRETE WITH NATURAL ULTRA-FINE PARTICLES
Lai, J. (2003) · Guisuanyan xuebao · Cited by 22
Durability Analysis Testing on Reactive Powder Concrete
Chuang, M. L., & Huang, W. H. (2013) · Advanced materials research · doi:10.4028/www.scientific.net/amr.811.244 · Cited by 15
Cited by
Amran, M., Huang, S.-S., Onaizi, A. M., Makul, N., Abdelgader, H. S., & Ozbakkaloglu, T. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.129029 · Cited by 548
Liu, Z., & Meng, W. (2021) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2020.101428 · Cited by 465
Smart materials and technologies for sustainable concrete construction
Nilimaa, J. (2023) · Developments in the Built Environment · doi:10.1016/j.dibe.2023.100177 · Cited by 387
Utilization of fibers in ultra-high performance concrete: A review
Gong, J., Ma, Y., Fu, J., Hu, J., Ouyang, X., Zhang, Z., & Wang, H. (2022) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2022.109995 · Cited by 360
Self-citationHuang, B.-T., Zhu, J.-X., Weng, K.-F., Li, V. C., & Dai, J.-G. (2022) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2022.104464 · Cited by 329
Metadata
- Authors
- Li, J., Wu, Z., Shi, C., Yuan, Q., & Zhang, Z.
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2020-09
- Volume
- 255
- Pages
- 119296
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W3021671912
- Cited by
- 680
- References
- 68
- FWCI
- 38.88
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.