Mechanical and physical properties and morphology of concrete containing plastic waste as aggregate

Life cycle assessment of building materials: Comparative analysis of energy and environmental impacts and evaluation of the eco-efficiency improvement potential

Zabalza, I., Capilla, A. V., & Aranda‐Usón, A. (2010) · Building and Environment · doi:10.1016/j.buildenv.2010.12.002 · Cited by 1,306 · see citing works

Use of selected waste materials in concrete mixes

Batayneh, M., Marie, I., & Asi, I. M. (2006) · Waste Management · doi:10.1016/j.wasman.2006.07.026 · Cited by 789 · see citing works

Use of recycled plastics in concrete: A critical review

Gu, L., & Ozbakkaloglu, T. (2016) · Waste Management · doi:10.1016/j.wasman.2016.03.005 · Cited by 730 · see citing works

Use of tire rubber particles as addition to cement paste

Segre, N. C., & Joekes, I. (2000) · Cement and Concrete Research · doi:10.1016/s0008-8846(00)00373-2 · Cited by 641 · see citing works

Effects of waste PET bottles aggregate on the properties of concrete

Choi, Y.-W., Moon, D.-J., Chung, J.-S., & Cho, S.-K. (2004) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.05.014 · Cited by 588 · see citing works

Recycling of PET bottles as fine aggregate in concrete

Frigione, M. (2010) · Waste Management · doi:10.1016/j.wasman.2010.01.030 · Cited by 528 · see citing works

Influence of content and particle size of waste pet bottles on concrete behavior at different w/c ratios

Albano, C., Camacho, N., Hernández, M., Matheus, A., & Gutiérrez, A. (2009) · Waste Management · doi:10.1016/j.wasman.2009.05.007 · Cited by 504 · see citing works

Valorization of post-consumer waste plastic in cementitious concrete composites

Marzouk, O. Y., Dheilly, R.-M., & Queneudec, M. (2006) · Waste Management · doi:10.1016/j.wasman.2006.03.012 · Cited by 474 · see citing works

On the mechanical properties of concrete containing waste PET particles

Rahmani, E., Dehestani, M., Beygi, M. H. A., Allahyari, H., & Nikbin, I. M. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.06.041 · Cited by 465 · see citing works

Use of different forms of waste plastic in concrete – a review

Sharma, R., & Bansal, P. P. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.08.042 · Cited by 422 · see citing works

Properties of lightweight aggregate concrete prepared with PVC granules derived from scraped PVC pipes

Kou, S.-C., Lee, G., Poon, C. S., & Lai, W. W. (2008) · Waste Management · doi:10.1016/j.wasman.2008.06.014 · Cited by 393 · see citing works

An investigation on the use of shredded waste PET bottles as aggregate in lightweight concrete

Akçaözoğlu, S., Atiş, C. D., & Akçaözoğlu, K. (2009) · Waste Management · doi:10.1016/j.wasman.2009.09.033 · Cited by 384 · see citing works

Physical and mechanical properties of mortars containing PET and PC waste aggregates

Hannawi, K., Kamali-Bernard, S., & Prince, W. (2010) · Waste Management · doi:10.1016/j.wasman.2010.03.028 · Cited by 375 · see citing works

Mechanical and durability properties of waste rubber fiber concrete with and without silica fume

Gupta, T., Chaudhary, S., & Sharma, A. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.07.081 · Cited by 370 · see citing works

Experimental study of the thermo-mechanical properties of recycled PET fiber-reinforced concrete

Fraternali, F., Ciancia, V., Chechile, R., et al. (2011) · Composite Structures · doi:10.1016/j.compstruct.2011.03.025 · Cited by 336 · see citing works

Green Energy and Technology

(2012) · BENTHAM SCIENCE PUBLISHERS eBooks · doi:10.2174/97816080528511120101 · Cited by 328 · see citing works

A novel material for lightweight concrete production

Kan, A., & Demirboğa, R. (2009) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2009.05.002 · Cited by 289 · see citing works

Engineering Properties of Concrete with Waste Recycled Plastic: A Review

Babafemi, A. J., Šavija, B., Paul, S. C., & Anggraini, V. (2018) · Sustainability · doi:10.3390/su10113875 · Cited by 267 · see citing works

Effects of waste PET as coarse aggregate on the fresh and harden properties of concrete

Islam, M. J., Meherier, S., & Islam, A. K. M. R. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.08.128 · Cited by 261 · see citing works

Physical and mechanical behaviour of recycled PET fibre reinforced mortar

de Oliveira, L. A. P., & Castro-Gomes, J. P. (2010) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2010.11.044 · Cited by 237 · see citing works

Impact resistance and energy absorption capacity of concrete containing plastic waste

Saxena, R., Siddique, S., Gupta, T., Sharma, A., & Chaudhary, S. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.05.019 · Cited by 209 · see citing works

Recycled Aggregate in Concrete

de Brito, J., & Saikia, N. (2012) · Green energy and technology · doi:10.1007/978-1-4471-4540-0 · Cited by 208 · see citing works

The influence of microencapsulated phase change material (PCM) characteristics on the microstructure and strength of cementitious composites: Experiments and finite element simulations

Aguayo, M., Das, S., Maroli, A., et al. (2016) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2016.06.018 · Cited by 186 · see citing works

Thermal conductivity, compressive strength and ultrasonic wave velocity of cementitious composite containing waste PET lightweight aggregate (WPLA)

Akçaözoğlu, S., Akçaözoğlu, K., & Atiş, C. D. (2012) · Composites Part B Engineering · doi:10.1016/j.compositesb.2012.09.012 · Cited by 185 · see citing works

Thermal diffusivity, thermal conductivity, and specific heat of flax fiber–HDPE biocomposites at processing temperatures

Li, X., Tabil, L. G., Oguocha, I. N. A., et al. (2008) · Composites Science and Technology · doi:10.1016/j.compscitech.2008.02.016 · Cited by 168 · see citing works

Novel lightweight concrete containing manufactured plastic aggregate

Alqahtani, F., Ghataora, G. S., Khan, M. I., et al. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.05.011 · Cited by 167 · see citing works

Mechanical and thermophysical properties of lightweight aggregate concretes

Oktay, H., Yumrutaş, R., & Abdullah, A. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.08.015 · Cited by 156 · see citing works

Effect of incorporating PVC waste as aggregate on the physical, mechanical, and chloride ion penetration behavior of concrete

Senhadji, Y., Escadeillas, G., Benosman, A. S., Mouli, M., Khelafi, H., & Kaci, S. O. (2015) · Journal of Adhesion Science and Technology · doi:10.1080/01694243.2014.1000773 · Cited by 146 · see citing works

Effect of partial replacement of sand by plastic waste on impact resistance of concrete: experiment and simulation

Mustafa, M. A.-T., Hanafi, I., Mahmoud, R., & Tayeh, B. A. (2019) · Structures · doi:10.1016/j.istruc.2019.06.008 · Cited by 144 · see citing works

Properties of self-compacting concrete (SCC) with recycled tire rubber aggregate: A comprehensive study

Li, N., Long, G., Ma, C., et al. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.117707 · Cited by 140 · see citing works

Thermo-physical and mechanical characteristics of sand-based lightweight composite mortars with recycled high-density polyethylene (HDPE)

Badache, A., Benosman, A. S., Senhadji, Y., & Mouli, M. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.12.069 · Cited by 135 · see citing works

Characterization of concrete composites with recycled plastic aggregates from postconsumer material streams

Jacob-Vaillancourt, C., & Sorelli, L. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.06.083 · Cited by 131 · see citing works

A matrix in life cycle perspective for selecting sustainable materials for buildings in Sri Lanka

Abeysundara, U. G. Y., Babel, S., & Gheewala, S. H. (2008) · Building and Environment · doi:10.1016/j.buildenv.2008.07.005 · Cited by 114 · see citing works

Effect of palm oil clinker (POC) aggregates on fresh and hardened properties of concrete

Abutaha, F., Razak, H. A., & Kanadasan, J. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.02.172 · Cited by 104 · see citing works

Effect of rubber aggregates on the physico-mechanical behaviour of cement–rubber composites-influence of the alveolar texture of rubber aggregates

Benazzouk, A., Mezreb, K., Doyen, G., et al. (2002) · Cement and Concrete Composites · doi:10.1016/s0958-9465(02)00067-7 · Cited by 102 · see citing works

Modification of Waste Aggregate PET for Improving the Concrete Properties

Lee, Z. H., Paul, S. C., Kong, S. Y., et al. (2019) · Advances in Civil Engineering · doi:10.1155/2019/6942052 · Cited by 94 · see citing works

Polymer processing: modeling and simulation

Osswald, T. A., & Hernandez-Ortiz, J. P. (2007) · Choice Reviews Online · doi:10.5860/choice.44-2727 · Cited by 92 · see citing works

Physical, mechanical and thermal properties of lightweight composite mortars containing recycled polyvinyl chloride

Senhadji, Y., Siad, H., Escadeillas, G., Benosman, A. S., Chihaoui, R., Mouli, M., & Lachemi, M. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.11.070 · Cited by 90 · see citing works

Valorisation of waste expanded polystyrene in concrete using a novel recycling technique

Herki, B. M. A., & Khatib, J. (2016) · European Journal of Environmental and Civil engineering · doi:10.1080/19648189.2016.1170729 · Cited by 83 · see citing works

Considerations on sound absorption coefficient of sustainable concrete with different waste replacements

Oancea, I., Bujoreanu, C., Budescu, M., et al. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.08.273 · Cited by 82 · see citing works

Incorporation of fine plastic aggregates in rendering mortars

da Silva, A. M., de Brito, J., & Veiga, R. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.08.026 · Cited by 80 · see citing works

Investigation on the use of foamed plastic waste as natural aggregates replacement in lightweight mortar

Coppola, B., Courard, L., Michel, F., Incarnato, L., & Maio, L. D. (2016) · Composites Part B Engineering · doi:10.1016/j.compositesb.2016.05.058 · Cited by 79 · see citing works

Enhancement of electrical and thermal conductivity of polypropylene by graphene nanoplatelets

Imran, K. A., Lou, J., & Shivakumar, K. N. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.45833 · Cited by 66 · see citing works

Physico-mechanical and thermal properties of composite mortars containing lightweight aggregates of expanded polyvinyl chloride

Latroch, N., Benosman, A. S., Bouhamou, N.-E., Senhadji, Y., & Mouli, M. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.04.173 · Cited by 60 · see citing works

Identifying optimal regional solid waste management strategies through an inexact integer programming model containing infinite objectives and constraints

He, L., Huang, G., Zeng, G., et al. (2008) · Waste Management · doi:10.1016/j.wasman.2008.02.003 · Cited by 54 · see citing works

Dioxin contamination after an accidental fire in the municipal landfill of Tagarades, Thessaloniki, Greece

Vassiliadou, I., Papadopoulos, A., Costopoulou, D., et al. (2008) · Chemosphere · doi:10.1016/j.chemosphere.2008.11.016 · Cited by 50 · see citing works

The Effect of Aggregate, Type and Quantity of Cement on Modulus of Elasticity of Lightweight Aggregate Concrete

Malešev, M., Radonjanin, V. S., Lukić, I., & Bulatović, V. (2013) · Arabian Journal for Science and Engineering · doi:10.1007/s13369-013-0702-2 · Cited by 48 · see citing works

Experimental study on thermo-mechanical properties of Polymer Modified Mortar

Aattache, A., Mahi, A., Soltani, R., et al. (2013) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.05.055 · Cited by 36 · see citing works

Mechanical and Creep Properties of Concrete containing Apricot Shell Lightweight Aggregate

Wu, F., Liu, C., Sun, W. G., et al. (2019) · KSCE Journal of Civil Engineering · doi:10.1007/s12205-019-0738-2 · Cited by 31 · see citing works

Plastic Waste Particles in Mortar Composites: Sulfate Resistance and Thermal Coefficients

Benosman, A. S., Taïbi, H., Senhadji, Y., et al. (2017) · Progress in Rubber Plastics and Recycling Technology · doi:10.1177/147776061703300304 · Cited by 28 · see citing works

Mineralogical Study of Polymer-Mortar Composites with PET Polymer by Means of Spectroscopic Analyses

Benosman, A. S., Mouli, M., Taïbi, H., et al. (2012) · Materials Sciences and Applications · doi:10.4236/msa.2012.33022 · Cited by 25 · see citing works

A full factorial‐based desirability function approach to investigate optimal mixture ratio of polymer concrete

Şimşek, B., & Uygunoğlu, T. (2017) · Polymer Composites · doi:10.1002/pc.24330 · Cited by 25 · see citing works

Laboratory Investigations of the Properties of Concrete Containing Recycled Plastic Aggregates

Yadav, I. S., Kumar, M., & Goyal, S. (2008) · Cited by 19 · see citing works

Granulated foam glass based on mineral wastes used for building materials

Chahour, K., Aboutaleb, D., Safi, B., et al. (2017) · Building Acoustics · doi:10.1177/1351010x17739434 · Cited by 13 · see citing works

MODELING OF ULTIMATE LOAD FOR LIGHTWEIGHT PALM OIL CLINKER REINFORCED CONCRETE BEAMS WITH WEB OPENINGS USING RESPONSE SURFACE METHODOLOGY

Hussein, S. H., Mustapha, K. N., Muda, Z. C., et al. (2012) · Cited by 5 · see citing works

Thermal Performance of Various Pavement Materials

Li, H. (2016) · Elsevier eBooks · doi:10.1016/b978-0-12-803476-7.00008-8 · Cited by 5 · see citing works

Mechanical and thermal properties of lightweight recycled plastic aggregate concrete

Basha, S. I., Ali, M. R., Al-Dulaijan, S. U., & Maslehuddin, M. (2020) · Journal of Building Engineering · doi:10.1016/j.jobe.2020.101710 · Cited by 158 · see citing works

Transforming Plastic Waste into Value: A Review of Management Strategies and Innovative Applications in Sustainable Construction

Haba, B., Djellali, S., Abdelouahed, Y., Boudjelida, S., Faleschini, F., & Carraro, M. (2025) · Polymers · doi:10.3390/polym17070881 · Cited by 68 · see citing works

The utilization of recycled plastics in the transportation infrastructure systems: A comprehensive review

Hasheminezhad, A., Farina, A., Yang, B., Ceylan, H., Kim, S., Tutumluer, E., & Cetin, B. (2024) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2023.134448 · Cited by 34 · see citing works

Engineering properties of a building material with melted plastic waste as the only binder

Thiam, M., & Fall, M. (2021) · Journal of Building Engineering · doi:10.1016/j.jobe.2021.102684 · Cited by 16 · see citing works

Effects of Ozone on the Mechanical Properties of HDPE Pipes

Jeong, Y., Bang, W., & Lee, K. (2023) · Journal of the Korea Academia-Industrial cooperation Society · doi:10.5762/kais.2023.24.2.42

The effect of recycled – high density polyethylene (hdpe) mixing ratio on the tensile strength of high density polyethylene (hdpe) polymer

Husna, R. S. A. (2013) · Cited by 1 · see citing works

Effects of impurities on the photodegradation of high-density polyethylene.

Osawa, Z., & Kuroda, H. (1986) · NIPPON KAGAKU KAISHI · doi:10.1246/nikkashi.1986.811 · Cited by 3 · see citing works

STUDY ON HIGH WELD STRENGTH OF IMPACT PROPYLENE COPOLYMER/HIGH DENSITY POLYETHYLENE LAMINATES

Chunhui, Zhang, Rui-fen, et al. (2011) · Acta Scientiarum Naturalium Universitatis Sunyatseni

Morphologies and Properties of Injection Molded Specimens of Polypropylene/High Density Polyethylene/Carbon Black Composites.

浩, 由., 博成, 佐., 道也, 岡., et al. (1996) · KOBUNSHI RONBUNSHU · doi:10.1295/koron.53.745 · Cited by 5 · see citing works