The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Corrosion resistance evaluation of rebars with various primers and coatings in concrete modified with different additives
Abstract
Abstract Corrosion of steel rebars in concrete can reduce the durability of concrete structures in coastal environments. The corrosion rate of these concrete structures can be reduced by using suitable concrete additives and coating on rebars. This paper investigates the corrosion resistance of steel rebars by the addition of pozzolanic materials including fly ash, silica fume, polypropylene fibers, and industrial 2-dimethylaminoethanol (FerroGard 901) inhibitors to the concrete mixture. Three different types of rebars including mild steel rebar st37, and two stainless steel reinforcements, AISI 304 and AISI 316, were used. Various types of primer and coating including alkyd based primer, hot-dip galvanized coatings, alkyd top coating, zinc-rich epoxy primer, polyamide epoxy primer, polyamide epoxy top coating, polyurethane coatings, double layer of epoxy primer and alkyd top coating, and double layer of alkyd primer and alkyd top coating were applied on steel rebars to investigate the effect of coating type on the corrosion resistance of steel rebars in concrete. Polarization tests, electrochemical impedance spectroscopy, compressive strength and color adhesion tests were conducted. The best reinforced concrete mix design for corrosion resistance was the one including the rebar with zinc-rich epoxy primer and 25% fly ash, 10% silica fume, and 3% FerroGard 901 inhibitors by cementitious material weight. Polyurethane was the best coating due to the highest strength and the lowest corrosion rate. Alkyd primer was the weakest coating, although it was the most economical coating system.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Alkali-activated fly ash/slag cements
Puertas, F., Martı́nez-Ramı́rez, S., Alonso, S., & Vázquez, T. (2000) · Cement and Concrete Research · doi:10.1016/s0008-8846(00)00298-2 · Cited by 921
Activation of blended cements containing fly ash
Qian, J., Shi, C., & Wang, Z. (2001) · Cement and Concrete Research · doi:10.1016/s0008-8846(01)00526-9 · Cited by 177
Cited by
Clayey soil stabilization using alkali-activated volcanic ash and slag
Miraki, H., Shariatmadari, N., Ghadir, P., Jahandari, S., Tao, Z., & Siddique, R. (2022) · Journal of Rock Mechanics and Geotechnical Engineering · doi:10.1016/j.jrmge.2021.08.012 · Cited by 276
Self-citationBiopolymers as Green Binders for Soil Improvement in Geotechnical Applications: A Review
Fatehi, H., Ong, D. E. L., Yu, J., & Chang, I. (2021) · Geosciences · doi:10.3390/geosciences11070291 · Cited by 261
Metadata
- Authors
- Afshar, A., Jahandari, S., Rasekh, H., Shariati, M., Afshar, A., & Shokrgozar, A.
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2020-11
- Volume
- 262
- Pages
- 120034
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W3041824023
- Cited by
- 186
- References
- 2
- FWCI
- 17.33
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Corrosion resistance evaluation of rebars with various primers and coatings in concrete modified with different additives. https://app.cochat.ai/papers/10.1016/j.conbuildmat.2020.120034
- The paper
- Afshar, A., Jahandari, S., Rasekh, H., Shariati, M., Afshar, A., & Shokrgozar, A. (2020). Corrosion resistance evaluation of rebars with various primers and coatings in concrete modified with different additives. Construction and Building Materials. https://doi.org/10.1016/j.conbuildmat.2020.120034
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.