The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Effect of microwave heating on interlayer bonding and buildability of geopolymer 3D concrete printing
Open accessAbstract
The emerging concept of 3D concrete printing (3DCP) by the laminate stacking of layers without formwork has major issues of poor interlayer bond adhesion and inadequate buildability of printed layers. This paper explores microwave heating technique as a set-on-demand method to increase the structuration rate of geopolymer concrete for 3DCP applications. The microwave heating was applied just before the placement of layers (i.e. at the nozzle head) and the effect of heating duration on the interlayer bond strength and buildability were assessed. Moreover, the loss of surface and bulk moisture and the bond strength enhancing mechanism were also investigated. The results demonstrated that the optimum microwaving duration of 10 s has increased the interlayer bond strength by 132%. The interlayer temperature and surface moisture loss has shown an increasing trend with the heating duration. Despite the increased surface moisture loss with microwave heating, the observed increment in interlayer bond strength (for up to 10 s of heating) was due to the acceleration in polycondensation reaction between the filaments having adequate stiffness for maximum mechanical interlocking with minimum deformation after stacking. On the other hand, the buildability of printed filaments, as measured from the rate of particle re-flocculation and structuration, has showed a major improvement. Findings from this study propose incorporating “set-on demand” technique using electromagnetic radiations in construction 3D printing. This initiates a new era of print heads, designed to solve problems faced by current concrete printing industry.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
One-part alkali-activated materials: A review
Luukkonen, T., Abdollahnejad, Z., Yliniemi, J., Kinnunen, P., & Illikainen, M. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.10.001 · Cited by 1,456
Cited by
Large-scale 3D printing concrete technology: Current status and future opportunities
Xiao, J., Ji, G., Zhang, Y., Ma, G., Mechtcherine, V., Pan, J., Wang, L., Ding, T., Duan, Z., & Du, S. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2021.104115 · Cited by 532
Sustainable materials for 3D concrete printing
Bhattacherjee, S., Basavaraj, A. S., Rahul, A. V., Santhanam, M., Gettu, R., Panda, B., Schlangen, E., Chen, Y., Copuroglu, O., Ma, G., et al. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2021.104156 · Cited by 321
Metadata
- Authors
- Muthukrishnan, S., Ramakrishnan, S., & Sanjayan, J.
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2020-12
- Volume
- 265
- Pages
- 120786
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W3086779398
- Cited by
- 173
- References
- 1
- FWCI
- 10.02
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Effect of microwave heating on interlayer bonding and buildability of geopolymer 3D concrete printing. https://app.cochat.ai/papers/10.1016/j.conbuildmat.2020.120786
- The paper
- Muthukrishnan, S., Ramakrishnan, S., & Sanjayan, J. (2020). Effect of microwave heating on interlayer bonding and buildability of geopolymer 3D concrete printing. Construction and Building Materials. https://doi.org/10.1016/j.conbuildmat.2020.120786
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.