Cr diffusion coatings on a ferritic-martensitic steel for corrosion protection in KCl-rich biomass co-firing environments
The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Abstract
Abstract Three diffusion coatings (Cr, Ni + Cr, Ni-P + Cr) on a ferritic-martensitic X20CrMoV12-1 steel were investigated in a biomass-co-firing atmosphere in comparison to uncoated austenitic DMV 310 N. Exposures were conducted at 650 °C for up to 300 h with pure sulphates as well as a mixture of sulphates and KCl. These aggressive testing conditions were chosen to accelerate degradation of the specimens allowing for an efficient ranking between them. Beneath the deposit of Na2SO4-K2SO4 the coatings proved to be highly resistant whereas addition of KCl drastically accelerated the corrosive attack. This is discussed within the frame of different synergistic high temperature corrosion mechanisms.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hot corrosion of materials: a fluxing mechanism?
Rapp, R. A. (2002) · Corrosion Science · doi:10.1016/s0010-938x(01)00057-9 · Cited by 529
KCl Induced Corrosion of a 304-type Austenitic Stainless Steel at 600°C; The Role of Potassium
Pettersson, J., Asteman, H., Svensson, J. E., & Johansson, L. G. (2005) · Oxidation of Metals · doi:10.1007/s11085-005-5704-3 · Cited by 182
Pettersson, J., Folkeson, N., Johansson, L.-G., & Svensson, J.-E. (2011) · Oxidation of Metals · doi:10.1007/s11085-011-9240-z · Cited by 117
Folkeson, N., Jonsson, T., Halvarsson, M., Johansson, L. ‐., & Svensson, J. ‐. (2011) · Materials and Corrosion · doi:10.1002/maco.201005942 · Cited by 93
Lehmusto, J., Skrifvars, B.-J., Yrjas, P., & Hupa, M. (2013) · Fuel Processing Technology · doi:10.1016/j.fuproc.2011.12.016 · Cited by 68
KCl‐induced high temperature corrosion of selected commercial alloys: Part I: chromia‐formers
Kiamehr, S., Dahl, K. V., Montgomery, M., & Somers, M. A. J. (2015) · Materials and Corrosion · doi:10.1002/maco.201408213 · Cited by 42
Shi, L., Zhang, Y., & Shih, S. (1992) · Oxidation of Metals · doi:10.1007/bf00665661 · Cited by 13
A calculation method of biomass slagging rate based on crystallization theory
Niu, Y., Zhu, Y., Tan, H., Hui, S., Jones, J. M., & Liu, Y. (2014) · Asia-Pacific Journal of Chemical Engineering · doi:10.1002/apj.1775 · Cited by 8
Cited by
Fireside corrosion on T24 steel pipes and HVOF NiCr coatings exposed to different salt mixtures
Abu-warda, N., López, A. J., Pedraza, F., & Utrilla, M. V. (2020) · Corrosion Science · doi:10.1016/j.corsci.2020.108747 · Cited by 32
Ssenteza, V., Eklund, J., Bigdeli, S., & Jonsson, T. (2024) · Corrosion Science · doi:10.1016/j.corsci.2023.111654 · Cited by 23
High temperature corrosion memory in a waste fired boiler – Influence of sulfur
Paz, M. D., Phother-Simon, J., Andersson, S., & Jonsson, T. (2021) · Waste Management · doi:10.1016/j.wasman.2021.05.005 · Cited by 17
Kong, Y., Ning, H., Huang, Y., Zhou, M., Zeng, G., Cheng, K., Shen, Y., Li, J., & Liu, Z. (2025) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2025.10.111 · Cited by 4
Metadata
- Authors
- Meißner, T. M., Montero, X., Fähsing, D., & Galetz, M. C.
- Venue
- Corrosion Science
- Publisher
- Elsevier BV
- Published
- 2020-03
- Volume
- 164
- Pages
- 108343
- ISSN
- 0010-938X (ISSN-L)
- OpenAlex
- W2984576779
- Cited by
- 51
- References
- 8
- FWCI
- 4.03
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Cr diffusion coatings on a ferritic-martensitic steel for corrosion protection in KCl-rich biomass co-firing environments. https://app.cochat.ai/papers/10.1016/j.corsci.2019.108343
- The paper
- Meißner, T. M., Montero, X., Fähsing, D., & Galetz, M. C. (2020). Cr diffusion coatings on a ferritic-martensitic steel for corrosion protection in KCl-rich biomass co-firing environments. Corrosion Science. https://doi.org/10.1016/j.corsci.2019.108343
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.