The DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.
Recent advances in grain refinement of light metals and alloys
Open accessAbstract
Grain refinement leads, in general, to a decreased tendency to hot tearing, a more dispersed and refined porosity distribution, and improved directional feeding characteristics during solidification. Reduced as-cast grain size can also lead to improved mechanical properties and wrought processing by reducing the recrystallized grain size and achieving a fully recrystallized microstructure. It is now well established that the two key factors controlling grain refinement are the nucleant particles including their potency, size distribution and particle number density, and the rate of development of growth restriction, Q, generated by the alloy chemistry which establishes the undercooling needed to trigger nucleation events and facilitates their survival. The theories underpinning our current understanding of nucleation and grain formation are presented. The application of the latest theories to the light alloys of Al, Mg and Ti is explored as well as their applicability to a range of casting and solidification environments. In addition, processing by the application of physical processes such as external fields and additive manufacturing is discussed. To conclude, the current challenges for the development of reliable grain refining technologies for difficult to refine alloy systems are presented.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fundamentals of Solidification
Kurz, W., & Fisher, D. J. (2012) · ASM International eBooks · doi:10.31399/asm.tb.pdub.t53420429 · Cited by 3,287
Fundamentals of Solidification: Fourth Revised Edition
Kurz, W., & Fisher, D. J. (1998) · Retrospective Collection · doi:10.4028/www.scientific.net/rc.35 · Cited by 1,955
Thijs, L., Kempen, K., Kruth, J.-P., & Van Humbeeck, J. (2013) · Acta Materialia · doi:10.1016/j.actamat.2012.11.052 · Cited by 1,917
The redistribution of solute atoms during the solidification of metals
Tiller, W. A., Jackson, K. A., Rutter, J. W., & Chalmers, B. (1953) · Acta Metallurgica · doi:10.1016/0001-6160(53)90126-6 · Cited by 1,686
Steady state columnar and equiaxed growth of dendrites and eutectic
Hunt, J. D. (1984) · Materials Science and Engineering · doi:10.1016/0025-5416(84)90201-5 · Cited by 1,470
Theory of microstructural development during rapid solidification
Kurz, W., Giovanola, B., & Trivedi, R. (1986) · Acta Metallurgica · doi:10.1016/0001-6160(86)90056-8 · Cited by 1,358
Vilaro, T., Colin, C., & Bartout, J. D. (2011) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-011-0731-y · Cited by 1,283
Size Effect in Heterogeneous Nucleation
Fletcher, N. H. (1958) · The Journal of Chemical Physics · doi:10.1063/1.1744540 · Cited by 1,112
Diffusion coefficients of some solutes in fcc and liquid Al: critical evaluation and correlation
Du, Y., Chang, Y. A., Huang, B., Gong, W., Jin, Z., Xu, H., Yuan, Z., Liu, Y., He, Y., & Xie, F.-Y. (2003) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(03)00624-5 · Cited by 953
Turnbull, D., & Vonnegut, B. (1952) · Industrial & Engineering Chemistry · doi:10.1021/ie50510a031 · Cited by 784
Cited by
Current Status and Perspectives on Wire and Arc Additive Manufacturing (WAAM)
Rodrigues, T. A., Duarte, V., Miranda, R. M., Santos, T. G., & Oliveira, J. P. (2019) · Materials · doi:10.3390/ma12071121 · Cited by 779
Making sustainable aluminum by recycling scrap: The science of “dirty” alloys
Raabe, D., Ponge, D., Uggowitzer, P. J., Roscher, M., Paolantonio, M., Liu, C., Antrekowitsch, H., Kozeschnik, E., Seidmann, D., Gault, B., et al. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.100947 · Cited by 626
Grain refinement of magnesium alloys by dynamic recrystallization (DRX): A review
Mirzadeh, H. (2023) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2023.07.150 · Cited by 354
Grain Refinement of Alloys in Fusion-Based Additive Manufacturing Processes
Zhang, D., Prasad, A., Bermingham, M. J., Todaro, C. J., Benoit, M. J., Patel, M. N., Qiu, D., StJohn, D. H., Qian, M., & Easton, M. A. (2020) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-020-05880-4 · Cited by 270
Self-citationUltrafast Laser Additive Manufacturing: A Review
Saunders, J., Elbestawi, M., & Fang, Q. (2023) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp7030089 · Cited by 35
Metadata
- Authors
- Easton, M. A., Qian, M., Prasad, A., & StJohn, D. H.
- Venue
- Current Opinion in Solid State and Materials Science
- Publisher
- Elsevier BV
- Published
- 2016-02
- Volume
- 20
- Issue
- 1
- Pages
- 13-24
- ISSN
- 1359-0286 (ISSN-L)
- OpenAlex
- W1891685392
- Cited by
- 308
- References
- 31
- FWCI
- 0.57
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Recent advances in grain refinement of light metals and alloys. https://app.cochat.ai/papers/10.1016/j.cossms.2015.10.001
- The paper
- Easton, M. A., Qian, M., Prasad, A., & StJohn, D. H. (2016). Recent advances in grain refinement of light metals and alloys. Current Opinion in Solid State and Materials Science. https://doi.org/10.1016/j.cossms.2015.10.001
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.