The DOI matches its Crossref record; 76 of the 76 references it cites were found in a registry or an index.
Grain Refinement of Alloys in Fusion-Based Additive Manufacturing Processes
Open accessAbstract
One of the less desirable aspects of fusion-based additive manufacturing is the propensity for coarse columnar grain structures crossing build layers to form. This paper initially attempts to explain the reason for the formation of columnar grain structures in terms of the high thermal gradients typically observed during solidification and the alloy compositions that are typically used which promote epitaxial growth. Successful approaches to the grain refinement of titanium alloys using alloying elements that produce constitutional supercooling are discussed along with the difficulty with nucleant additions. Much of the grain-refining technology already used in aluminium casting is shown to also be applicable to additive manufacturing, although the novelty of the effective use of nanoparticles as nucleants is highlighted. It is also shown that for other alloy systems for which there is a lack of grain-refining technology using chemical means, mechanical means, such as ultrasonic treatment, can be effective across a wide range of alloys. Finally, consideration is given to the difficulties and the possible solutions of producing parts layer by layer. In particular, the importance of understanding nucleation in solidification conditions characterized by high cooling rates and thermal gradients; the importance of melt dynamics; and how previous layers could provide possibilities for refinement of the subsequent layer are highlighted.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ror2 signaling regulates Golgi structure and transport through IFT20 for tumor invasiveness
Nishita, M., Park, S.-Y., Nishio, T., Kamizaki, K., Wang, Z., Tamada, K., Takumi, T., Hashimoto, R., Otani, H., Pazour, G. J., et al. (2017) · Scientific Reports · doi:10.1038/s41598-016-0028-x · Cited by 15,947
Laser additive manufacturing of metallic components: materials, processes and mechanisms
Gu, D. D., Meiners, W., Wissenbach, K., & Poprawe, R. (2012) · International Materials Reviews · doi:10.1179/1743280411y.0000000014 · Cited by 3,197
Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing
Gibson, I., Rosen, D. W., & Stucker, B. (2010) · National University of Singapore · doi:10.1007/978-1-4419-1120-9 · Cited by 2,969
3D printing of high-strength aluminium alloys
Martin, J. H., Yahata, B. D., Hundley, J. M., Mayer, J. A., Schaedler, T. A., & Pollock, T. M. (2017) · Nature · doi:10.1038/nature23894 · Cited by 2,950
Materials Properties Handbook: Titanium Alloys
Boyer, R. R., Welsch, G. E., & Collings, E. W. (1994) · Medical Entomology and Zoology · Cited by 2,637
Fundamentals of Solidification: Fourth Revised Edition
Kurz, W., & Fisher, D. J. (1998) · Retrospective Collection · doi:10.4028/www.scientific.net/rc.35 · Cited by 1,955
Olakanmi, E. O., Cochrane, R. F., & Dalgarno, K. W. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.03.002 · Cited by 1,742
Aboulkhair, N. T., Simonelli, M., Parry, L., Ashcroft, I., Tuck, C., & Hague, R. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.100578 · Cited by 1,552
Steady state columnar and equiaxed growth of dendrites and eutectic
Hunt, J. D. (1984) · Materials Science and Engineering · doi:10.1016/0025-5416(84)90201-5 · Cited by 1,470
Kok, Y., Tan, X. P., Wang, P., Nai, M. L. S., Loh, N. H., Liu, E., & Tor, S. B. (2018) · Materials & Design · doi:10.1016/j.matdes.2017.11.021 · Cited by 1,447
Cited by
Review of high-strength aluminium alloys for additive manufacturing by laser powder bed fusion
Rometsch, P. A., Zhu, Y., Wu, X., & Huang, A. (2022) · Materials & Design · doi:10.1016/j.matdes.2022.110779 · Cited by 330
Metadata
- Authors
- Zhang, D., Prasad, A., Bermingham, M. J., Todaro, C. J., Benoit, M. J., Patel, M. N., Qiu, D., StJohn, D. H., Qian, M., & Easton, M. A.
- Venue
- Metallurgical and Materials Transactions A
- Published
- 2020-06-25
- Volume
- 51
- Issue
- 9
- Pages
- 4341-4359
- ISSN
- 1073-5623 (ISSN-L)
- 1543-1940
- OpenAlex
- W3037915125
- Cited by
- 270
- References
- 76
- FWCI
- 13.96
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Grain Refinement of Alloys in Fusion-Based Additive Manufacturing Processes. https://app.cochat.ai/papers/10.1007/s11661-020-05880-4
- The paper
- Zhang, D., Prasad, A., Bermingham, M. J., Todaro, C. J., Benoit, M. J., Patel, M. N., Qiu, D., StJohn, D. H., Qian, M., & Easton, M. A. (2020). Grain Refinement of Alloys in Fusion-Based Additive Manufacturing Processes. Metallurgical and Materials Transactions A. https://doi.org/10.1007/s11661-020-05880-4
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.