The DOI matches its Crossref record; 32 of the 32 references it cites were found in a registry or an index.
Polymer ageing: physics, chemistry or engineering? Time to reflect
Open accessAbstract
Polymer ageing may involve physical ageing without chemical reaction occurring; chemical changes such as crosslinking during curing of a thermoset; thermal conditioning at elevated temperature; photochemical ageing , as occurs in weathering. This review concentrates on examples involving a combination of two or more of these effects, and with the consequential changes in engineering properties. Events on the molecular level lead to change in the morphology and macroscopic physical properties. For example, in a semi-crystalline polymer, chain scission caused by photo-oxidation, may lead to secondary crystallisation (‘chemi-crystallisation’), increasing density, and causing an increase in Young’s modulus and reducing ductility. Similar effects may be observed in glassy polymers, due to chain scission accelerating physical ageing. Such effects are particularly common when rapid cooling during moulding has left the polymer in a state far from equilibrium. A common symptom is a change in the residual stress distribution in polymer mouldings and this is discussed. .
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Non-symmetrical dielectric relaxation behaviour arising from a simple empirical decay function
Williams, G., & Watts, D. C. (1970) · Transactions of the Faraday Society · doi:10.1039/tf9706600080 · Cited by 4,450
Physical aging in amorphous polymers and other materials
Struik, L. C. E. (1978) · Research Repository (Delft University of Technology) · Cited by 3,368
Mechanical Properties of Solid Polymers: Third Edition
Ward, I. M., & Sweeney, J. (2012) · Wiley eBooks · doi:10.1002/9781119967125 · Cited by 2,084
Physical aging in amorphous polymers and other materials
Haward, R. N. (1979) · Polymer · doi:10.1016/0032-3861(79)90237-4 · Cited by 1,873
A Model of Structural Relaxation in Glass
NARAYANASWAMY, O. S. (1971) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1971.tb12186.x · Cited by 1,534
Dependence of the Fictive Temperature of Glass on Cooling Rate
MOYNIHAN, C. T., EASTEAL, A. J., De BOLT, M. A., & TUCKER, J. (1976) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1976.tb09376.x · Cited by 1,241
Transition vitreuse dans les polymères amorphes. Etude phénoménologique
Kovacs, A. J. (2006) · Advances in Polymer Science · doi:10.1007/bfb0050366 · Cited by 1,026
Isobaric volume and enthalpy recovery of glasses. II. A transparent multiparameter theory
Kovacs, A. J., Aklonis, J. J., Hutchinson, J. M., & Ramos, A. R. (1979) · Journal of Polymer Science: Polymer Physics Edition · doi:10.1002/pol.1979.180170701 · Cited by 805
Mechanical properties of solid polymers
Treloar, L. R. G. (1972) · Polymer · doi:10.1016/0032-3861(72)90129-2 · Cited by 681
The Structure of Noncrystalline Materials
Poraĭ-Koshit︠s︡, E. A. (1976) · Annual Review of Materials Science · doi:10.1146/annurev.ms.06.080176.002133 · Cited by 560
Analysis of Structural Relaxation in Glass Using Rate Heating Data
DEBOLT, M. A., EASTEAL, A. J., MACEDO, P. B., & MOYNIHAN, C. T. (1976) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1976.tb09377.x · Cited by 544
Elements of polymer degradation
Reich, L., & Stivala, S. S. (1971) · Medical Entomology and Zoology · Cited by 400
Role of oxygen diffusion in polymer ageing: kinetic and mechanical aspects
Audouin, L., Langlois, V., Verdu, J., & de Bruijn, J. C. M. (1994) · Journal of Materials Science · doi:10.1007/bf00445968 · Cited by 312
White, J. R., & Turnbull, A. (1994) · Journal of Materials Science · doi:10.1007/bf00445969 · Cited by 305
Self-citationThe role of physical structure and morphology in the photodegradation behaviour of polypropylene
Rabello, M. S., & White, J. R. (1997) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(96)00202-9 · Cited by 299
Self-citationThe mechanical and physical ageing of semicrystalline polymers: 1
Struik, L. C. E. (1987) · Polymer · doi:10.1016/0032-3861(87)90353-3 · Cited by 272
Davis, A., & Sims, D. (1983) · Medical Entomology and Zoology · Cited by 216
Quantitative model for the time development of diffusion-limited oxidation profiles
Wise, J., Gillen, K. T., & Clough, R. L. (1997) · Polymer · doi:10.1016/s0032-3861(96)00716-1 · Cited by 168
Pospı́šil, J., Horák, Z., Pilař, J., Billingham, N. C., Zweifel, H., & Nešpůrek, S. (2003) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(03)00210-6 · Cited by 161
Natural and artificial weathering of polymers
Kockott, D. (1989) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(89)81007-9 · Cited by 137
Free volume and the kinetics of aging of polymer glasses
Robertson, R. E., Simha, R., & Curro, J. G. (1984) · Macromolecules · doi:10.1021/ma00134a064 · Cited by 135
Morphology of quenched polypropylene
Gezovich, D. M., & Geil, P. H. (1968) · Polymer Engineering and Science · doi:10.1002/pen.760080305 · Cited by 124
The mechanical behaviour and physical ageing of semicrystalline polymers: 2
Struik, L. C. E. (1987) · Polymer · doi:10.1016/0032-3861(87)90354-5 · Cited by 121
Mechanical behaviour and physical ageing of semi-crystalline polymers: 4
Struik, L. C. E. (1989) · Polymer · doi:10.1016/0032-3861(89)90177-8 · Cited by 98
McKenna, G. B., & Kovacs, A. J. (1984) · Polymer Engineering and Science · doi:10.1002/pen.760241410 · Cited by 89
Schoolenberg, G. E., & Meijer, H. D. F. (1991) · Polymer · doi:10.1016/0032-3861(91)90447-q · Cited by 58
Effect of stabilizers on failure mechanisms in weathered polypropylene
Qayyum, M. M., & White, J. R. (1993) · Polymer Degradation and Stability · doi:10.1016/0141-3910(93)90039-l · Cited by 43
Self-citationMolecular weight measurement in weathered polymers
O’Donnell, B., White, J. R., & Holding, S. R. (1994) · Journal of Applied Polymer Science · doi:10.1002/app.1994.070521109 · Cited by 41
Self-citationShyichuk, A., Turton, T. J., White, J. R., & Syrotynska, I. (2004) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2004.05.011 · Cited by 37
Self-citationNew model of physical aging effects in enthalpy recovery
Rendell, R. W., Lee, T.-K., & Ngai, K. L. (1984) · Polymer Engineering and Science · doi:10.1002/pen.760241405 · Cited by 19
de Bruijn, J. C. M. (1996) · Advances in chemistry series · doi:10.1021/ba-1996-0249.ch036 · Cited by 18
The site model theory and the standard linear solid
White, J. R. (1981) · Rheologica Acta · doi:10.1007/bf01517469 · Cited by 13
Self-citation
Cited by
Poly‐Lactic Acid: Production, Applications, Nanocomposites, and Release Studies
Jamshidian, M., Tehrany, E. A., Imran, M., Jacquot, M., & Desobry, S. (2010) · Comprehensive Reviews in Food Science and Food Safety · doi:10.1111/j.1541-4337.2010.00126.x · Cited by 1,557
“This phenomenon is very common and is encountered in thermoplastics moldings that have been cooled rapidly from an elevated temperature during the shaping operation such as injection molding process (White 2006).”
Thirty Years of Luminescent Solar Concentrator Research: Solar Energy for the Built Environment
Debije, M. G., & Verbunt, P. P. C. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201100554 · Cited by 949
Swetha, T. A., Bora, A., Mohanrasu, K., Balaji, P., Raja, R., Ponnuchamy, K., Muthusamy, G., & Arun, A. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.123715 · Cited by 630
Micro- and nanoplastics – current state of knowledge with the focus on oral uptake and toxicity
Paul, M. B., Stock, V., Cara-Carmona, J., Lisicki, E., Shopova, S., Fessard, V., Braeuning, A., Sieg, H., & Böhmert, L. (2020) · Nanoscale Advances · doi:10.1039/d0na00539h · Cited by 277
Paul-Pont, I., Tallec, K., Gonzalez-Fernandez, C., Lambert, C., Vincent, D., Mazurais, D., Zambonino-Infante, J.-L., Brotons, G., Lagarde, F., Fabioux, C., et al. (2018) · Frontiers in Marine Science · doi:10.3389/fmars.2018.00252 · Cited by 271
Metadata
- Authors
- White, J. R.
- Venue
- Comptes Rendus. Chimie
- Publisher
- MathDoc/Centre Mersenne
- Published
- 2006-10-04
- Volume
- 9
- Issue
- 11-12
- Pages
- 1396-1408
- ISSN
- 1631-0748 (ISSN-L)
- 1878-1543
- OpenAlex
- W2082337088
- Cited by
- 255
- References
- 32
- FWCI
- 2.77
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.