The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
Physical, chemical, and geotechnical properties of coal fly ash: A global review
Open accessAbstract
In 2015, fly ash utilization rates were 70% for China, 62% for India, and 50% for the US. This leaves substantial potential for increased utilization. This article summarizes available literature concerning physical and chemical and geotechnical properties of fly ash which affect its options for re-use. Fly ashes are broadly classified worldwide into two chemical types for their industrial applications, mostly in cement industries, namely class C and class F. Class C fly ash, with its higher levels of calcium oxide, generally has self-cementing properties. In terms of global fly ash composition, fly ash from India on average contains higher levels of silicon dioxide than that from the US and China. In terms of particle size, studies report that fly ash more often is poorly graded than well-graded; fly ash from India in particular tends to be poorly graded. Optimum moisture content (OMC) values for fly ashes vary from 11 to 53%, and maximum dry density values range from 1.01 to 1.78 g/cm 3 . Country-specific trends in terms of fly ash OMC and maximum dry density values are not readily apparent. Fly ash tends to be non-plastic, meaning it will not swell if used as a foundation material for structures. Reported fly ash shrinkage limits range from 38 to 65. Permeability of pure fly ash generally varies from 10 −4 to 10 -7 cm/sec, and angle of friction varies from 25° to 40°.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review on the utilization of fly ash
Ahmaruzzaman, M. (2010) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2009.11.003 · Cited by 2,641
A comprehensive review on the applications of coal fly ash
Yao, Z. T., Ji, X. S., Sarker, P. K., Tang, J. H., Ge, L. Q., Xia, M. S., & Xi, Y. Q. (2015) · Earth-Science Reviews · doi:10.1016/j.earscirev.2014.11.016 · Cited by 1,737
A review of the multi-component utilisation of coal fly ash
Blissett, R. S., & Rowson, N. A. (2012) · Fuel · doi:10.1016/j.fuel.2012.03.024 · Cited by 1,154
Workability and strength of coarse high calcium fly ash geopolymer
Chindaprasirt, P., Chareerat, T., & Sirivivatnanon, V. (2007) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2006.11.002 · Cited by 863
Effect of fly ash fineness on compressive strength and pore size of blended cement paste
Chindaprasirt, P., Jaturapitakkul, C., & Sinsiri, T. (2005) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2004.07.003 · Cited by 612
Phoo-ngernkham, T., Maegawa, A., Mishima, N., Hatanaka, S., & Chindaprasirt, P. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.05.001 · Cited by 572
Progressive utilisation prospects of coal fly ash: A review
Gollakota, A. R. K., Volli, V., & Shu, C.-M. (2019) · Science of The Total Environment · doi:10.1016/j.scitotenv.2019.03.337 · Cited by 548
Chindaprasirt, P., De Silva, P., Sagoe-Crentsil, K., & Hanjitsuwan, S. (2012) · Journal of Materials Science · doi:10.1007/s10853-012-6353-y · Cited by 539
Environmental-benign utilisation of fly ash as low-cost adsorbents
WANG, S., & WU, H. (2006) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2006.01.067 · Cited by 497
Vassilev, S. V., & Vassileva, C. G. (2007) · Fuel · doi:10.1016/j.fuel.2006.11.020 · Cited by 444
Cited by
Amran, M., Debbarma, S., & Ozbakkaloglu, T. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.121857 · Cited by 532
Metadata
- Authors
- Bhatt, A., Priyadarshini, S., Acharath Mohanakrishnan, A., Abri, A., Sattler, M., & Techapaphawit, S.
- Venue
- Case Studies in Construction Materials
- Publisher
- Elsevier BV
- Published
- 2019-12
- Volume
- 11
- Pages
- e00263
- ISSN
- 2214-5095 (ISSN-L)
- OpenAlex
- W2955963856
- Cited by
- 525
- References
- 35
- FWCI
- 24.98
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Physical, chemical, and geotechnical properties of coal fly ash: A global review. https://app.cochat.ai/papers/10.1016/j.cscm.2019.e00263
- The paper
- Bhatt, A., Priyadarshini, S., Acharath Mohanakrishnan, A., Abri, A., Sattler, M., & Techapaphawit, S. (2019). Physical, chemical, and geotechnical properties of coal fly ash: A global review. Case Studies in Construction Materials. https://doi.org/10.1016/j.cscm.2019.e00263
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.