The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Effect of elevated temperatures on mechanical properties of lightweight geopolymer concrete
Open accessAbstract
This study aims to examine the effect of high temperatures on lightweight geopolymer concrete (LWGC) and lightweight ordinary concrete (LWOC) made of natural pumice and lightweight expanded clay aggregate (LECA) with the addition of trapped air. To this end, a geopolymer concrete matrix has been synthesized by the alkali-activation of fly ash (FA) and granulated blast furnace slag (GBFS). The geopolymer concrete samples were cured for 24 h at a temperature of 80 °C. To study the properties of fresh concrete, slump and slump flow tests and unit weight were applied. The mechanical properties were also measured by the compressive strength, splitting tensile, flexural strength, and elastic modulus tests. High temperatures of 100 °C, 200 °C, 300 °C, 400 °C, 500 °C, 600 °C, 700 °C, and 800 °C were applied on the geopolymer concrete samples to obtain the residual compressive strength. In general, pumice and LECA can be used as an alternative to the dolomite aggregate to produce LWGC and LWOC. The mixture F-50D50P-A achieved the lowest of unit weight of 1660 kg/m, a slump flow of 555 mm, and compressive strength of 32.9 MPa at 91-days. Lightweight geopolymer concrete containing 50 % fly ash and 50 % GBSF achieved the best compressive strength test results. The results showed a similarity in the behaviour of LWGC with LWOC under the influence of all the variables applied in this study.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Effect of elevated temperatures on geopolymer paste, mortar and concrete
Kong, D. L. Y., & Sanjayan, J. G. (2010) · Cement and Concrete Research · doi:10.1016/j.cemconres.2009.10.017 · Cited by 985
The mechanical properties of fly ash-based geopolymer concrete with alkaline activators
Ryu, G. S., Lee, Y. B., Koh, K. T., & Chung, Y. S. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.05.069 · Cited by 927
A review on alkaline activation: New analytical perspectives
Palomo, A., Krivenko, P., Garcia-Lodeiro, I., Kavalerova, E., Maltseva, O., & Fernández-Jiménez, A. (2014) · Materiales de Construcción · doi:10.3989/mc.2014.00314 · Cited by 501
Cited by
Potential applications of geopolymer concrete in construction: A review
Almutairi, A. L., Tayeh, B. A., Adesina, A., Isleem, H. F., & Zeyad, A. M. (2021) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2021.e00733 · Cited by 481
Self-citationShehata, N., Mohamed, O. A., Sayed, E. T., Abdelkareem, M. A., & Olabi, A. G. (2022) · Science of The Total Environment · doi:10.1016/j.scitotenv.2022.155577 · Cited by 371
Performance of Sustainable Geopolymer Concrete Made of Different Alkaline Activators
Hamed, Y. R., Keshta, M. M., Elshikh, M. M. Y., Elshami, A. A., Matthana, M. H. S., & Youssf, O. (2025) · Infrastructures · doi:10.3390/infrastructures10020041 · Cited by 19
Studies on Optimization of Fly Ash, GGBS and Precipitated Silica in Geopolymer Concrete
Anilkumar, Sreekeshava, K. S., & Bhargavi, C. (2025) · Construction Materials · doi:10.3390/constrmater5020029 · Cited by 6
“Longo et al. highlighted the potential of lightweight geopolymer mortars for retrofitting buildings, while Tayeh et al. studied the effects of elevated temperatures on the durability of GPC [2,3].”
Metadata
- Authors
- Tayeh, B. A., Zeyad, A. M., Agwa, I. S., & Amin, M.
- Venue
- Case Studies in Construction Materials
- Publisher
- Elsevier BV
- Published
- 2021-12
- Volume
- 15
- Pages
- e00673
- ISSN
- 2214-5095 (ISSN-L)
- OpenAlex
- W3196303564
- Cited by
- 249
- References
- 3
- FWCI
- 24.58
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.