The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Ultra-high-performance fiber-reinforced concrete. Part IV: Durability properties, cost assessment, applications, and challenges
Open accessAbstract
Ultra-high-performance concrete (UHPC) is a type of cement-based composite for new construction and/or restoration of existing structures to increase service life. It is an innovative composite material that can be a suitable alternative to concrete structures exposed to aggressive conditions. After decades of research and development, a wide range of commercial UHPC compositions have been produced worldwide to cover a growing number of applications and a growing demand for high-quality construction materials. UHPC has significant advantages over regular concrete, but its use is limited due to limited design codes and prohibitive cost. Therefore, a comprehensive investigation of the durability characteristics of UHPC is essential to provide fundamental information for material testing requirements and procedures and expand its practical applications. Part I reviewed the developments, principles, and raw materials of the UHPFRC. Part II reviewed the hydration and microstructure of the UHPFRC. Part III reviewed the fresh and hardened properties of the UHPFRC. This Part IV covers the durability properties, cost assessment, applications, and challenges of the UHPFRC. Part V covers the mixture design, preparation, mixing, casting, and curing of the UHPFRC. This review is expected to advance the fundamental knowledge of UHPC and promote further research and applications of UHPC.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
FERNANDEZBERTOS, M., SIMONS, S., HILLS, C., & CAREY, P. (2004) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2004.04.019 · Cited by 1,079
The presentation of the chloride threshold level for corrosion of steel in concrete
Glass, G. K., & Buenfeld, N. R. (1997) · Corrosion Science · doi:10.1016/s0010-938x(97)00009-7 · Cited by 573
Wu, Z., Shi, C., & Khayat, K. H. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.107021 · Cited by 454
Cited by
Vibration-based approach for structural health monitoring of ultra-high-performance concrete bridge
Saidin, S. S., Kudus, S. A., Jamadin, A., Anuar, M. A., Amin, N. M., Ya, A. B. Z., & Sugiura, K. (2023) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2022.e01752 · Cited by 45
Metadata
- Authors
- Akeed, M. H., Qaidi, S., Ahmed, H. U., Faraj, R. H., Mohammed, A. S., Emad, W., Tayeh, B. A., & Azevedo, A. R. G.
- Venue
- Case Studies in Construction Materials
- Publisher
- Elsevier BV
- Published
- 2022-12
- Volume
- 17
- Pages
- e01271
- ISSN
- 2214-5095 (ISSN-L)
- OpenAlex
- W4283690273
- Cited by
- 175
- References
- 3
- FWCI
- 18.41
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.