Removal of a disperse red dye from synthetic wastewater by chemical coagulation and continuous electrocoagulation. A comparative study
The DOI matches its Crossref record.
Abstract
The effectiveness of chemical coagulation (CC) was compared to electrocoagulation (EC) with aluminium electrodes for decolourization purpose of a synthetic textile wastewater containing a disperse red dye. For CC, ferric chloride FeCl3 and aluminium sulphate Al2(SO4)3 as the coagulant were compared: the respective effects of initial pH, coagulant dosage, initial dye concentration, ionic strength and mixing conditions were investigated in order to maximize decolourization yield. The comparison between CC and EC is based on recently published data on EC by the same authors. Experimental results showed first that Al2(SO4)3 was far more effective than FeCl3 for colour removal using CC, regardless of operating conditions. A removal yield higher than 90% could be achieved with a 40 mg/L dose of Al2(SO4)3 18H2O in a large range of pH from 4 to 8 and for a dye concentration up to 235 mg/L. The removal yield could however be enhanced up to 95% using EC for pH values between 6 and 9 at the expense of higher operating costs. Nevertheless, EC presented the additional advantages to be more robust against pH change and to reduce simultaneously equipment costs in comparison to CC.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Recent Advancement of Coagulation–Flocculation and Its Application in Wastewater Treatment
Teh, C. Y., Budiman, P. M., Shak, K. P. Y., & Wu, T. Y. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b04703 · Cited by 1,160
Ahmad, A., Mohd-Setapar, S. H., Chuong, C. S., Khatoon, A., Wani, W. A., Kumar, R., & Rafatullah, M. (2015) · RSC Advances · doi:10.1039/c4ra16959j · Cited by 1,112
Electrocoagulation process in water treatment: A review of electrocoagulation modeling approaches
Hakizimana, J. N., Gourich, B., Chafi, M., Stiriba, Y., Vial, C., Drogui, P., & Naja, J. (2017) · Desalination · doi:10.1016/j.desal.2016.10.011 · Cited by 908
Self-citationGarcia-Segura, S., Eiband, M. M. S. G., de Melo, J. V., & Martínez-Huitle, C. A. (2017) · Journal of Electroanalytical Chemistry · doi:10.1016/j.jelechem.2017.07.047 · Cited by 740
Electrocoagulation for the treatment of textile industry effluent – A review
Khandegar, V., & Saroha, A. K. (2013) · Journal of Environmental Management · doi:10.1016/j.jenvman.2013.06.043 · Cited by 669
Removal of colorants from wastewater: A review on sources and treatment strategies
Pavithra, K. G., P., S. K., V., J., & P., S. R. (2019) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2019.02.011 · Cited by 634
Various Approaches for the Detoxification of Toxic Dyes in Wastewater
Alsukaibi, A. K. D. (2022) · Processes · doi:10.3390/pr10101968 · Cited by 447
Performance of different coagulants in the coagulation/flocculation process of textile wastewater
Dotto, J., Fagundes-Klen, M. R., Veit, M. T., Palácio, S. M., & Bergamasco, R. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.10.112 · Cited by 401
Liu, L., Chen, Z., Zhang, J., Shan, D., Wu, Y., Bai, L., & Wang, B. (2021) · Journal of Water Process Engineering · doi:10.1016/j.jwpe.2021.102122 · Cited by 374
Zhang, L.-C., Jia, Z., Lyu, F., Liang, S.-X., & Lu, J. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.100576 · Cited by 312
Yadav, S., Asthana, A., Singh, A. K., Chakraborty, R., Vidya, S. S., Susan, M. A. B. H., & Carabineiro, S. A. C. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.124840 · Cited by 264
Metadata
- Authors
- Merzouk, B., Gourich, B., Madani, K., Vial, C., & Sekki, A.
- Venue
- Desalination
- Publisher
- Elsevier BV
- Published
- 2011-05
- Volume
- 272
- Issue
- 1-3
- Pages
- 246-253
- ISSN
- 0011-9164 (ISSN-L)
- OpenAlex
- W2047069518
- Cited by
- 185
- References
- 0
- FWCI
- 10.16
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.