The DOI matches its Crossref record.
The DMX™ process: An original solution for lowering the cost of post-combustion carbon capture
Open accessAbstract
To make the deployment of carbon capture possible, it is highly needed to develop original solutions that induce low energy penalty and that are easy to operate. This paper aims at presenting the DMX™ process developed at IFP Energies nouvelles based on special solvents which are characterized by the formation of two immiscible phases for given temperature and CO2 loading conditions. The concept of demixtion is briefly described in terms of physico-chemical properties, its interest and all required steps for appropriate process development are discussed. The corresponding process is presented and a technico-economic analysis is given. It is shown than one can reach a reboiler duty as low as 2.1 GJ/t CO2 which is significantly lower than the 3.7 GJ/t CO2 of the 30wt.% MEA reference process. It is also discussed that the energy consumption at reboiler cannot be the only parameter to consider for comparison with other processes and some further information about the DMX™ process are given. Operational issues are particularly discussed. In that sense, the performances of the DMX-1TM solvent in terms of degradation and corrosion are shown. Similarly a particular focus is made on the liquid/liquid separation which is a key aspect of the DMX™ process.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Carbon capture and storage (CCS): the way forward
Bui, M., Adjiman, C. S., Bardow, A., Anthony, E. J., Boston, A., Brown, S., Fennell, P. S., Fuss, S., Galindo, A., Hackett, L. A., et al. (2018) · Energy & Environmental Science · doi:10.1039/c7ee02342a · Cited by 4,374
Liang, Z. (., Rongwong, W., Liu, H., Fu, K., Gao, H., Cao, F., Zhang, R., Sema, T., Henni, A., Sumon, K., et al. (2015) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2015.06.017 · Cited by 599
Phase change solvents for post-combustion CO2 capture: Principle, advances, and challenges
Zhang, S., Shen, Y., Wang, L., Chen, J., & Lu, Y. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.01.242 · Cited by 404
Liang, Z., Fu, K., Idem, R., & Tontiwachwuthikul, P. (2016) · Chinese Journal of Chemical Engineering · doi:10.1016/j.cjche.2015.06.013 · Cited by 308
Carbon capture by absorption – Path covered and ahead
Sreedhar, I., Nahar, T., Venugopal, A., & Srinivas, B. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.03.109 · Cited by 261
Metadata
- Authors
- Raynal, L., Alix, P., Bouillon, P.-A., Gomez, A., de Nailly, M. L. F., Jacquin, M., Kittel, J., di Lella, A., Mougin, P., & Trapy, J.
- Venue
- Energy Procedia
- Publisher
- Elsevier BV
- Published
- 2011
- Volume
- 4
- Pages
- 779-786
- ISSN
- 1876-6102 (ISSN-L)
- OpenAlex
- W1975030535
- Cited by
- 205
- References
- 0
- FWCI
- 29.99
- Type
- conference paper
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The DMX™ process: An original solution for lowering the cost of post-combustion carbon capture. https://app.cochat.ai/papers/10.1016/j.egypro.2011.01.119
- The paper
- Raynal, L., Alix, P., Bouillon, P.-A., Gomez, A., de Nailly, M. L. F., Jacquin, M., Kittel, J., di Lella, A., Mougin, P., & Trapy, J. (2011). The DMX™ process: An original solution for lowering the cost of post-combustion carbon capture. Energy Procedia. https://doi.org/10.1016/j.egypro.2011.01.119
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.