The DOI matches its Crossref record.
Blend of Polypropylene/Poly(lactic acid) for Medical Packaging Application: Physicochemical, Thermal, Mechanical, and Barrier Properties
Open accessAbstract
The effect of polypropylene/poly(lactic acid) weight ratios on the properties of blend films compatilized with polypropylene-grafted-maleic anhydride were investigated with 100:0, 60:40, 50:50, 40:60, and 0:100 of weight ratio. The blend films were prepared by melt mixing technique and cast film extrusion. The results shown that the FTIR spectrum was confirmed the interaction between compatibilizer and polymers. Morphological investigation was distinctly seen a two phases system between polypropylene and poly(lactic acid). Increasing of PLA content from 40 to 60 wt.% resulting in decreased melting temperature and crystallinity from 158 °C to 154 °C and 38% to 31%, respectively. For tensile properties, modulus and tensile strength increased with increasing the PLA content, while elongation at break was drastically decreased from 500% (polypropylene) to less than 50% (blends). The barrier properties indicated that incorporation of poly(lactic acid) into polypropylene tend to increased water vapor permeability while oxygen permeability was decreased. From the morphology, thermal, mechanical, and barrier results, the polypropylene/poly(lactic acid) blends showed a typical immiscible polymer blend.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Poly (lactic acid) blends: Processing, properties and applications
Nofar, M., Sacligil, D., Carreau, P. J., Kamal, M. R., & Heuzey, M.-C. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.12.002 · Cited by 780
Polylactic acid blends: The future of green, light and tough
Hamad, K., Kaseem, M., Ayyoob, M., Joo, J., & Deri, F. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.07.001 · Cited by 640
Ali, A., & Ahmed, S. (2018) · Journal of Agricultural and Food Chemistry · doi:10.1021/acs.jafc.8b01052 · Cited by 304
Samanta, P., Srivastava, R., Nandan, B., & Chen, H.-L. (2017) · Soft Matter · doi:10.1039/c6sm02748b · Cited by 22
Metadata
- Authors
- Ploypetchara, N., Suppakul, P., Atong, D., & Pechyen, C.
- Venue
- Energy Procedia
- Publisher
- Elsevier BV
- Published
- 2014
- Volume
- 56
- Pages
- 201-210
- ISSN
- 1876-6102 (ISSN-L)
- OpenAlex
- W2072507769
- Cited by
- 158
- References
- 0
- FWCI
- 45.13
- Type
- conference paper
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Blend of Polypropylene/Poly(lactic acid) for Medical Packaging Application: Physicochemical, Thermal, Mechanical, and Barrier Properties. https://app.cochat.ai/papers/10.1016/j.egypro.2014.07.150
- The paper
- Ploypetchara, N., Suppakul, P., Atong, D., & Pechyen, C. (2014). Blend of Polypropylene/Poly(lactic acid) for Medical Packaging Application: Physicochemical, Thermal, Mechanical, and Barrier Properties. Energy Procedia. https://doi.org/10.1016/j.egypro.2014.07.150
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.