Comparative Studies on CO2 Adsorption Kinetics by Solid Adsorbents
Open accessThe DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Adsorption kinetics of carbon dioxide (CO2) on activated carbon (Norit RB3 type steam activated rod) and zeolite 5A (Si/Al = 1.33) are compared at various temperatures (298, 308, 318 and 338K) and supply pressures (1, 5, 10 and 20bar). Sievert's type experimental setup is used for adsorption kinetics measurement. The experimental data is subsequently modelled using pseudo first and second order kinetics models, which revealed that the pseudo second order kinetics model well fitted the CO2 adsorption kinetics data than pseudo first order kinetics model. The rate constants and activation energies of CO2 adsorption on activated carbon and zeolite 5A are estimated. It is found that at 1bar supply pressure, the rate of CO2 adsorption on zeolite 5A is more than that of the activated carbon, while at higher pressure, the rate of CO2 adsorption on the activated carbon is greater than the zeolite 5A due to large surface area and pore volume. Activation energies are calculated at different pressures by fitting the Arrhenius equation to the adsorption kinetics data. It is observed that the activation energies of activated carbon are slightly more than that of the zeolite 5A.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Adsorption of CO2on Zeolite 13X and Activated Carbon with Higher Surface Area
Zhang, Z., Zhang, W., Chen, X., Xia, Q., & Li, Z. (2010) · Separation Science and Technology · doi:10.1080/01496390903571192 · Cited by 146
Kinetic studies on carbon dioxide capture using lignocellulosic based activated carbon
Rashidi, N. A., Yusup, S., & Hameed, B. H. (2013) · Energy · doi:10.1016/j.energy.2013.08.050 · Cited by 122
Cited by
Ammendola, P., Raganati, F., & Chirone, R. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.04.037 · Cited by 314
Advances in recovery and utilization of carbon dioxide: A brief review
Godin, J., Liu, W., Ren, S., & Xu, C. C. (2021) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2021.105644 · Cited by 283
CO2 capture by adsorption on biomass-derived activated char: A review.
Goel, C., Mohan, S., & Dinesha, P. (2021) · Science of the Total Environment · doi:10.1016/j.scitotenv.2021.149296 · Cited by 206
Raganati, F., Alfe, M., Gargiulo, V., Chirone, R., & Ammendola, P. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.04.165 · Cited by 209
Sherugar, P., Padaki, M., Naik, N. S., George, S. D., & Murthy, D. H. K. (2022) · Chemosphere · doi:10.1016/j.chemosphere.2021.132085 · Cited by 128
Fixed bed adsorption as affected by thermodynamics and kinetics: yellow tuff for CO2 capture
Ammendola, P., Raganati, F., Chirone, R., & Miccio, F. (2020) · Powder Technology · doi:10.1016/j.powtec.2020.06.075 · Cited by 88
Development of high-performance CO2 adsorbents from urea-modified Leucaena leucocephala hydrochar
Amer, N. M., Shafawi, A. N., Lahijani, P., Mohammadi, M., & Mohamed, A. R. (2025) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-025-06634-1 · Cited by 1
Metadata
- Authors
- Singh, V. K., & Kumar, E. A.
- Venue
- Energy Procedia
- Publisher
- Elsevier BV
- Published
- 2016-12
- Volume
- 90
- Pages
- 316-325
- ISSN
- 1876-6102 (ISSN-L)
- OpenAlex
- W2559829715
- Cited by
- 117
- References
- 2
- FWCI
- 11.59
- Type
- conference paper
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.