The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
Graphene supercapacitor electrodes fabricated by inkjet printing and thermal reduction of graphene oxide
Open accessAbstract
Graphene oxide nanosheets, stably dispersed in water at 0.2 wt.%, were inkjet-printed onto Ti foils and thermally reduced at 200 °C in N2, as a new method of fabricating inkjet printed graphene electrodes (IPGEs) for supercapacitors. The specific capacitance of IPGE ranged from 48 to 132 F/g, depending on the potential scan rate from 0.5 to 0.01 V/s using 1M H2SO4 as the electrolyte. The initial performance of IPGEs compares favorably to that reported for graphene electrodes prepared by other fabrication methods. This new finding is expected to be particularly useful for designing and fabricating inter-digitized electrode arrays with a lateral spatial resolution of ~ 50 μm for flexible micro-supercapacitors.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Geim, A. K., & Novoselov, K. S. (2007) · Nature Materials · doi:10.1038/nmat1849 · Cited by 39,979
Materials for electrochemical capacitors
Simon, P., & Gogotsi, Y. (2008) · Nature Materials · doi:10.1038/nmat2297 · Cited by 16,427
Synthesis of graphene-based nanosheets via chemical reduction of exfoliated graphite oxide
Stankovich, S., Dikin, D. A., Piner, R. D., Kohlhaas, K. A., Kleinhammes, A., Jia, Y., Wu, Y., Nguyen, S. T., & Ruoff, R. S. (2007) · Carbon · doi:10.1016/j.carbon.2007.02.034 · Cited by 13,878
Processable aqueous dispersions of graphene nanosheets
Li, D., Müller, M. B., Gilje, S., Kaner, R. B., & Wallace, G. G. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2007.451 · Cited by 9,114
Graphene-Based Ultracapacitors
Stoller, M. D., Park, S., Zhu, Y., An, J., & Ruoff, R. S. (2008) · Nano Letters · doi:10.1021/nl802558y · Cited by 8,373
Roll-to-roll production of 30-inch graphene films for transparent electrodes
Bae, S., Kim, H., Lee, Y., Xu, X., Park, J.-S., Zheng, Y., Balakrishnan, J., Lei, T., Ri Kim, H., Song, Y. I., et al. (2010) · Nature Nanotechnology · doi:10.1038/nnano.2010.132 · Cited by 8,136
Electrochemical Supercapacitors : Scientific Fundamentals and Technological Applications
Conway, B. E. (2013) · CERN Document Server (European Organization for Nuclear Research) · Cited by 5,015
Graphene-Based Supercapacitor with an Ultrahigh Energy Density
Liu, C., Yu, Z., Neff, D., Zhamu, A., & Jang, B. Z. (2010) · Nano Letters · doi:10.1021/nl102661q · Cited by 3,207
Synthesis of Water Soluble Graphene
Si, Y., & Samulski, E. T. (2008) · Nano Letters · doi:10.1021/nl080604h · Cited by 2,722
Specific surface area of carbon nanotubes and bundles of carbon nanotubes
Peigney, A., Laurent, C., Flahaut, E., Bacsa, R. R., & Rousset, A. (2001) · Carbon · doi:10.1016/s0008-6223(00)00155-x · Cited by 2,040
Cited by
Towards flexible solid-state supercapacitors for smart and wearable electronics
Dubal, D. P., Chodankar, N. R., Kim, D.-H., & Gomez-Romero, P. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00505a · Cited by 1,725
An Overview of the Applications of Graphene‐Based Materials in Supercapacitors
Huang, Y., Liang, J., & Chen, Y. (2012) · Small · doi:10.1002/smll.201102635 · Cited by 1,389
Beidaghi, M., & Gogotsi, Y. (2014) · Energy & Environmental Science · doi:10.1039/c3ee43526a · Cited by 1,293
Graphene for batteries, supercapacitors and beyond
El-Kady, M. F., Shao, Y., & Kaner, R. B. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.33 · Cited by 1,262
Highly compressible 3D periodic graphene aerogel microlattices
Zhu, C., Han, T. Y.-J., Duoss, E. B., Golobic, A. M., Kuntz, J. D., Spadaccini, C. M., & Worsley, M. A. (2015) · Nature Communications · doi:10.1038/ncomms7962 · Cited by 1,148
Conductive Nanomaterials for Printed Electronics
Kamyshny, A., & Magdassi, S. (2014) · Small · doi:10.1002/smll.201303000 · Cited by 911
Recent Advancement of Nanostructured Carbon for Energy Applications
Yang, Z., Ren, J., Zhang, Z., Chen, X., Guan, G., Qiu, L., Zhang, Y., & Peng, H. (2015) · Chemical Reviews · doi:10.1021/cr5006217 · Cited by 810
Flexible Graphene-Based Wearable Gas and Chemical Sensors
Singh, E., Meyyappan, M., & Nalwa, H. S. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b07063 · Cited by 776
Supercapacitors Based on Three-Dimensional Hierarchical Graphene Aerogels with Periodic Macropores
Zhu, C., Liu, T., Qian, F., Han, T. Y.-J., Duoss, E. B., Kuntz, J. D., Spadaccini, C. M., Worsley, M. A., & Li, Y. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b04965 · Cited by 720
Carbon Nanotubes and Graphene for Flexible Electrochemical Energy Storage: from Materials to Devices
Wen, L., Li, F., & Cheng, H. (2016) · Advanced Materials · doi:10.1002/adma.201504225 · Cited by 711
Synthesis of Two‐Dimensional Materials for Capacitive Energy Storage
Mendoza‐Sánchez, B., & Gogotsi, Y. (2016) · Advanced Materials · doi:10.1002/adma.201506133 · Cited by 672
A review of carbon materials for supercapacitors
Zhai, Z., Zhang, L., Du, T., Ren, B., Xu, Y., Wang, S., Miao, J., & Liu, Z. (2022) · Materials & Design · doi:10.1016/j.matdes.2022.111017 · Cited by 647
Graphene oxide for photonics, electronics and optoelectronics
Wu, J., Lin, H., Moss, D. J., Loh, K. P., & Jia, B. (2023) · Nature Reviews Chemistry · doi:10.1038/s41570-022-00458-7 · Cited by 581
Flexible electrodes and supercapacitors for wearable energy storage: a review by category
Dong, L., Xu, C., Li, Y., Huang, Z.-H., Kang, F., Yang, Q.-H., & Zhao, X. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta10582j · Cited by 575
Functional inks and printing of two-dimensional materials
Hu, G., Kang, J., Ng, L. W. T., Zhu, X., Howe, R. C. T., Jones, C. G., Hersam, M. C., & Hasan, T. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00084k · Cited by 569
Chen, J., Li, Y., Huang, L., Li, C., & Shi, G. (2015) · Carbon · doi:10.1016/j.carbon.2014.10.033 · Cited by 557
Graphene for supercapacitor applications
Tan, Y. B., & Lee, J.-M. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta12193c · Cited by 547
Efficient Inkjet Printing of Graphene
Li, J., Ye, F., Vaziri, S., Muhammed, M., Lemme, M. C., & Östling, M. (2013) · Advanced Materials · doi:10.1002/adma.201300361 · Cited by 505
A review on inkjet printing of nanoparticle inks for flexible electronics
Nayak, L., Mohanty, S., Nayak, S. K., & Ramadoss, A. (2019) · Journal of Materials Chemistry C · doi:10.1039/c9tc01630a · Cited by 497
Printed supercapacitors: materials, printing and applications
Zhang, Y.-Z., Wang, Y., Cheng, T., Yao, L.-Q., Li, X., Lai, W.-Y., & Huang, W. (2019) · Chemical Society Reviews · doi:10.1039/c7cs00819h · Cited by 497
3D printing technologies for electrochemical energy storage
Zhang, F., Wei, M., Viswanathan, V. V., Swart, B., Shao, Y., Wu, G., & Zhou, C. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.08.037 · Cited by 494
Si-Based Anode Materials for Li-Ion Batteries: A Mini Review
Ma, D., Cao, Z., & Hu, A. (2014) · Nano-Micro Letters · doi:10.1007/s40820-014-0008-2 · Cited by 468
Paper‐Based Electrodes for Flexible Energy Storage Devices
Yao, B., Zhang, J., Kou, T., Song, Y., Liu, T., & Li, Y. (2017) · Advanced Science · doi:10.1002/advs.201700107 · Cited by 464
Graphene and MXene-based transparent conductive electrodes and supercapacitors
Zhang, C. (., & Nicolosi, V. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2018.05.003 · Cited by 461
2D‐Crystal‐Based Functional Inks
Bonaccorso, F., Bartolotta, A., Coleman, J. N., & Backes, C. (2016) · Advanced Materials · doi:10.1002/adma.201506410 · Cited by 446
A manufacturing perspective on graphene dispersions
Johnson, D. W., Dobson, B. P., & Coleman, K. S. (2015) · Current Opinion in Colloid & Interface Science · doi:10.1016/j.cocis.2015.11.004 · Cited by 440
3D Bioprinting: from Benches to Translational Applications
Heinrich, M. A., Liu, W., Jimenez, A., Yang, J., Akpek, A., Liu, X., Pi, Q., Mu, X., Hu, N., Schiffelers, R. M., et al. (2019) · Small · doi:10.1002/smll.201805510 · Cited by 437
Preventing Graphene Sheets from Restacking for High-Capacitance Performance
Wang, Y., Wu, Y., Huang, Y., Zhang, F., Yang, X., Ma, Y., & Chen, Y. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp206444e · Cited by 384
Guo, C. X., & Li, C. M. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01676h · Cited by 369
2D Materials in Flexible Electronics: Recent Advances and Future Prospectives
Katiyar, A. K., Hoang, A. T., Xu, D., Hong, J., Kim, B. J., Ji, S., & Ahn, J.-H. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00302 · Cited by 363
Rapid and Versatile Photonic Annealing of Graphene Inks for Flexible Printed Electronics
Secor, E. B., Ahn, B. Y., Gao, T. Z., Lewis, J. A., & Hersam, M. C. (2015) · Advanced Materials · doi:10.1002/adma.201502866 · Cited by 334
3D printed electrochemical energy storage devices
Chang, P., Mei, H., Zhou, S., Dassios, K. G., & Cheng, L. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta11860d · Cited by 329
Emerging Self‐Emissive Technologies for Flexible Displays
Zhang, D., Huang, T., & Duan, L. (2020) · Advanced Materials · doi:10.1002/adma.201902391 · Cited by 316
Ruiz-Morales, J. C., Tarancón, A., Canales-Vázquez, J., Méndez-Ramos, J., Hernández-Afonso, L., Acosta-Mora, P., Marín Rueda, J. R., & Fernández-González, R. (2017) · Energy & Environmental Science · doi:10.1039/c6ee03526d · Cited by 299
Tran, T. S., Dutta, N. K., & Choudhury, N. R. (2018) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2018.09.003 · Cited by 298
Recent Advances in Flexible/Stretchable Supercapacitors for Wearable Electronics
Li, L., Lou, Z., Chen, D., Jiang, K., Han, W., & Shen, G. (2018) · Small · doi:10.1002/smll.201702829 · Cited by 297
Inkjet deposition of liquid-exfoliated graphene and MoS2nanosheets for printed device applications
Finn, D. J., Lotya, M., Cunningham, G., Smith, R. J., McCloskey, D., Donegan, J. F., & Coleman, J. N. (2014) · J. Mater. Chem. C · doi:10.1039/c3tc31993h · Cited by 292
Wearable energy sources based on 2D materials
Yi, F., Ren, H., Shan, J., Sun, X., Wei, D., & Liu, Z. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00849j · Cited by 285
All inkjet-printed graphene-based conductive patterns for wearable e-textile applications
Karim, N., Afroj, S., Malandraki, A., Butterworth, S., Beach, C., Rigout, M., Novoselov, K. S., Casson, A. J., & Yeates, S. G. (2017) · Journal of Materials Chemistry C · doi:10.1039/c7tc03669h · Cited by 282
Inkjet Printing of Silver Nanowire Networks
Finn, D. J., Lotya, M., & Coleman, J. N. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b01875 · Cited by 279
Graphene-based materials with tailored nanostructures for energy conversion and storage
Yang, Y., Han, C., Jiang, B., Iocozzia, J., He, C., Shi, D., Jiang, T., & Lin, Z. (2016) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2015.12.003 · Cited by 273
A Review for Aqueous Electrochemical Supercapacitors
Zhao, C., & Zheng, W. (2015) · Frontiers in Energy Research · doi:10.3389/fenrg.2015.00023 · Cited by 266
Solution-Processed Transparent Electrodes for Emerging Thin-Film Solar Cells
Zhang, Y., Ng, S.-W., Lu, X., & Zheng, Z. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00483 · Cited by 264
Metadata
- Authors
- Le, L. T., Ervin, M. H., Qiu, H., Fuchs, B. E., & Lee, W. Y.
- Venue
- Electrochemistry Communications
- Publisher
- Elsevier BV
- Published
- 2011-04
- Volume
- 13
- Issue
- 4
- Pages
- 355-358
- ISSN
- 1388-2481 (ISSN-L)
- OpenAlex
- W2090217855
- Cited by
- 420
- References
- 23
- FWCI
- 10.22
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.