The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
The stability challenge on the pathway to high-current-density polymer electrolyte membrane water electrolyzers
Abstract
The investment costs for polymer electrolyte membrane (PEM) water electrolysis can be reduced if systems are operated at elevated current densities. However, it remains unknown how this affects long-term stability. In this study, we elucidate the durability and degradation phenomena that occur in our test cells at high (2 A cm−2) and elevated (up to 3 A cm−2) current densities during constant and intermittent operation. Up to 2 A cm−2, stable cell performance was achieved under both regime. At elevated current densities, two primary factors caused performance degradation, namely the increase in ohmic cell resistance and the appearance of mass-transport resistance, both of which contribute to the voltage increase in equal measures. By varying the way in which the cell is assembled, it was found that both effects relate to the anti-corrosion coating of the titanium porous transport layer (PTL), which was stable at 2 A cm−2 but detached at certain points and adhered to the anodic side of the catalyst-coated membrane (CCM) under operation at elevated current densities. The results of this study indicate that PEM water electrolyzers can be coupled to intermittent power profiles from renewable energy sources without substantially affecting long-term stability.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The surface science of titanium dioxide
Diebold, U. (2003) · Surface Science Reports · doi:10.1016/s0167-5729(02)00100-0 · Cited by 7,944
Cited by
Recent advances in proton exchange membrane water electrolysis
Liu, R.-T., Xu, Z.-L., Li, F.-M., Chen, F.-Y., Yu, J.-Y., Yan, Y., Chen, Y., & Xia, B. Y. (2023) · Chemical Society Reviews · doi:10.1039/d2cs00681b · Cited by 701
Perspectives on Low-Temperature Electrolysis and Potential for Renewable Hydrogen at Scale
Ayers, K., Danilovic, N., Ouimet, R., Carmo, M., Pivovar, B., & Bornstein, M. (2019) · Annual Review of Chemical and Biomolecular Engineering · doi:10.1146/annurev-chembioeng-060718-030241 · Cited by 406
Self-citationWang, C. R., Stansberry, J. M., Mukundan, R., Chang, H.-M. J., Kulkarni, D., Park, A. M., Plymill, A. B., Firas, N. M., Liu, C. P., Lang, J. T., et al. (2025) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00904 · Cited by 402
Advances in Oxygen Evolution Electrocatalysts for Proton Exchange Membrane Water Electrolyzers
Chen, Z., Guo, L., Pan, L., Yan, T., He, Z., Li, Y., Shi, C., Huang, Z., Zhang, X., & Zou, J. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202103670 · Cited by 298
Electrolyzer Durability at Low Catalyst Loading and with Dynamic Operation
Alia, S. M., Stariha, S., & Borup, R. L. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0231915jes · Cited by 263
Phan, T. T., Kim, S.-K., Islam, J., Kim, M.-J., & Lee, J.-H. (2024) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2023.09.274 · Cited by 66
Metadata
- Authors
- Rakousky, C., Keeley, G. P., Wippermann, K., Carmo, M., & Stolten, D.
- Venue
- Electrochimica Acta
- Publisher
- Elsevier BV
- Published
- 2018-07
- Volume
- 278
- Pages
- 324-331
- ISSN
- 0013-4686 (ISSN-L)
- OpenAlex
- W2802309268
- Cited by
- 171
- References
- 1
- FWCI
- 3.48
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.