The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Traditional, state-of-the-art and future thermal building insulation materials and solutions – Properties, requirements and possibilities
Open accessAbstract
The advantages and disadvantages of the thermal building insulation materials and solutions have been treated. Both traditional, state-of-the-art and possible materials and solutions beyond these have been investigated. Examples of these may be mineral wool, expanded polystyrene, extruded polystyrene, polyurethane, vacuum insulation panels, gas insulation panels, aerogels, and future possibilities like vacuum insulation materials, nano insulation materials and dynamic insulation materials. Various properties, requirements and possibilities have been compared and studied. Among these are thermal conductivity, perforation vulnerability, building site adaptability and cuttability, mechanical strength, fire protection, fume emission during fire, robustness, climate ageing durability, resistance towards freezing/thawing cycles, water resistance, costs and environmental impact. Currently, there exist no single insulation material or solution capable of fulfilling all the requirements with respect to the most crucial properties. That is, for the buildings of today and the near future, several insulation materials and solutions are used and will have to be used depending on the exact circumstances and specifications. As of today, new materials and solutions like e.g. vacuum insulation panels are emerging, but only slowly introduced in the building sector partly due to their short track record. Therefore it will be of major importance to know the limitations and possibilities of all the insulation materials and solutions, i.e. their advantages and disadvantages. In this respect new conceptual thermal building insulation materials are also discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review on phase change energy storage: materials and applications
Farid, M. M., Khudhair, A. M., Razack, S. A. K., & Al-Hallaj, S. (2004) · Energy Conversion and Management · doi:10.1016/j.enconman.2003.09.015 · Cited by 3,097
Khudhair, A. M., & Farid, M. M. (2004) · Energy Conversion and Management · doi:10.1016/s0196-8904(03)00131-6 · Cited by 1,394
Baetens, R., Jelle, B. P., & Gustavsen, A. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2009.08.021 · Cited by 1,322
Self-citationHasnain, S. M. (1998) · Energy Conversion and Management · doi:10.1016/s0196-8904(98)00025-9 · Cited by 1,267
Zhang, Z. M. (2020) · Mechanical Engineering Series · doi:10.1007/978-3-030-45039-7 · Cited by 1,121
Aerogel insulation for building applications: A state-of-the-art review
Baetens, R., Jelle, B. P., & Gustavsen, A. (2011) · Energy and Buildings · doi:10.1016/j.enbuild.2010.12.012 · Cited by 1,091
Self-citationAl-Homoud, D. M. S. (2005) · Building and Environment · doi:10.1016/j.buildenv.2004.05.013 · Cited by 1,019
Phase change materials for building applications: A state-of-the-art review
Baetens, R., Jelle, B. P., & Gustavsen, A. (2010) · Energy and Buildings · doi:10.1016/j.enbuild.2010.03.026 · Cited by 997
Self-citationJoulain, K., Mulet, J.-P., Marquier, F., Carminati, R., & Greffet, J.-J. (2005) · Surface Science Reports · doi:10.1016/j.surfrep.2004.12.002 · Cited by 950
State of the art in thermal insulation materials and aims for future developments
Papadopoulos, A. M. (2005) · Energy and Buildings · doi:10.1016/j.enbuild.2004.05.006 · Cited by 914
Emissions of greenhouse gases in the United States
Armor, J. N. (1995) · Applied Catalysis B: Environmental · doi:10.1016/0926-3373(95)80037-9 · Cited by 510
Vacuum insulation panels for building applications: A review and beyond
Baetens, R., Jelle, B. P., Thue, J. V., Tenpierik, M. J., Grynning, S., Uvsløkk, S., & Gustavsen, A. (2010) · Energy and Buildings · doi:10.1016/j.enbuild.2009.09.005 · Cited by 438
Self-citationENHANCED RADIATIVE HEAT TRANSFER AT NANOMETRIC DISTANCES
Mulet, J., Joulain, K., Carminati, R., & Greffet, J. (2002) · Microscale Thermophysical Engineering · doi:10.1080/10893950290053321 · Cited by 379
Thermal Energy Storage and Phase Change Materials: An Overview
Demirbas, M. F. (2006) · Energy Sources, Part B: Economics, Planning, and Policy · doi:10.1080/009083190881481 · Cited by 322
Super insulating aerogel glazing
SCHULTZ, J., JENSEN, K., & Kristiansen, F. H. (2005) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2005.01.016 · Cited by 259
Vacuum insulation panels for building application
Simmler, H., & Brunner, S. (2005) · Energy and Buildings · doi:10.1016/j.enbuild.2005.06.015 · Cited by 216
The path to the high performance thermal building insulation materials and solutions of tomorrow
Jelle, B. P., Gustavsen, A., & Baetens, R. (2010) · Journal of Building Physics · doi:10.1177/1744259110372782 · Cited by 208
Self-citationThermal conductivity of a clay-based aerogel
Hostler, S. R., Abramson, A. R., Gawryla, M. D., Bandi, S., & Schiraldi, D. A. (2008) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2008.07.002 · Cited by 151
Vacuum Insulation Panels – Exciting Thermal Properties and Most Challenging Applications
Fricke, J., Schwab, H., & Heinemann, U. (2006) · International Journal of Thermophysics · doi:10.1007/s10765-006-0106-6 · Cited by 140
Schultz, J. M., & Jensen, K. I. (2007) · Vacuum · doi:10.1016/j.vacuum.2007.10.019 · Cited by 128
Aging effects on thermal properties and service life of vacuum insulation panels
Wegger, E., Jelle, B. P., Sveipe, E., Grynning, S., Gustavsen, A., Baetens, R., & Thue, J. V. (2011) · Journal of Building Physics · doi:10.1177/1744259111398635 · Cited by 119
Self-citationGas-filled panels for building applications: A state-of-the-art review
Baetens, R., Jelle, B. P., Gustavsen, A., & Grynning, S. (2010) · Energy and Buildings · doi:10.1016/j.enbuild.2010.06.019 · Cited by 102
Self-citationThermal Conductivity of Opacified Powder Filler Materials for Vacuum Insulations1
Caps, R., & Fricke, J. (2000) · International Journal of Thermophysics · doi:10.1023/a:1006691731253 · Cited by 96
Schwab, H., Heinemann, U., Beck, A., Ebert, H.-P., & Fricke, J. (2005) · Journal of Building Physics · doi:10.1177/1097196305051792 · Cited by 86
Permeation of Different Gases Through Foils used as Envelopes for Vacuum Insulation Panels
Schwab, H., Heinemann, U., Beck, A., Ebert, H.-P., & Fricke, J. (2005) · Journal of Building Physics · doi:10.1177/1097196305051791 · Cited by 71
Prediction of Service Life for Vacuum Insulation Panels with Fumed Silica Kernel and Foil Cover
Schwab, H., Heinemann, U., Beck, A., Ebert, H.-P., & Fricke, J. (2005) · Journal of Building Physics · doi:10.1177/1097196305051894 · Cited by 65
Tenpierik, M., & Cauberg, H. (2007) · Journal of Building Physics · doi:10.1177/1744259107073160 · Cited by 61
Thermal Bridges in Vacuum-insulated Building Façades
Schwab, H., Stark, C., Wachtel, J., Ebert, H.-P., & Fricke, J. (2005) · Journal of Building Physics · doi:10.1177/1097196305051794 · Cited by 60
Investigation of multilayered aluminium-coated polymer laminates by focused ion beam (FIB) etching
Brunner, S., Gasser, P., Simmler, H., & Wakili, K. G. (2005) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2005.09.011 · Cited by 54
Quality control of vacuum insulation panels: Methods of measuring gas pressure
Caps, R., Beyrichen, H., Kraus, D., & Weismann, S. (2007) · Vacuum · doi:10.1016/j.vacuum.2007.10.015 · Cited by 48
Sveipe, E., Jelle, B. P., Wegger, E., Uvsløkk, S., Grynning, S., Thue, J. V., Time, B., & Gustavsen, A. (2011) · Journal of Building Physics · doi:10.1177/1744259111403439 · Cited by 45
Self-citationInfluence of Water on the Total Heat Transfer in ‘Evacuated’ Insulations
Heinemann, U. (2008) · International Journal of Thermophysics · doi:10.1007/s10765-007-0361-1 · Cited by 45
Grynning, S., Jelle, B. P., Uvsløkk, S., Gustavsen, A., Baetens, R., Caps, R., & Meløysund, V. (2010) · Journal of Building Physics · doi:10.1177/1744259110382229 · Cited by 41
Self-citationVacuum Insulation Panels Applied in Building Constructions
Tenpierik, M. (2010) · Research Repository (Delft University of Technology) · Cited by 26
Cited by
Wicklein, B., Kocjan, A., Salazar-Alvarez, G., Carosio, F., Camino, G., Antonietti, M., & Bergström, L. (2015) · Nature Nanotechnology · doi:10.1038/nnano.2014.248 · Cited by 1,422
Insulation materials for the building sector: A review and comparative analysis
Schiavoni, S., D׳Alessandro, F., Bianchi, F., & Asdrubali, F. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.05.045 · Cited by 993
Polyurethane Foams: Past, Present, and Future
Gama, N. V., Ferreira, A., & Barros-Timmons, A. (2018) · Materials · doi:10.3390/ma11101841 · Cited by 902
A review on insulation materials for energy conservation in buildings
Aditya, L., Mahlia, T. M. I., Rismanchi, B., Ng, H. M., Hasan, M. H., Metselaar, H. S. C., Muraza, O., & Aditiya, H. B. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.02.034 · Cited by 811
Thermal conductivity of concrete – A review
Asadi, I., Shafigh, P., Abu Hassan, Z. F. B., & Mahyuddin, N. B. (2018) · Journal of Building Engineering · doi:10.1016/j.jobe.2018.07.002 · Cited by 803
Metadata
- Authors
- Jelle, B. P.
- Venue
- Energy and Buildings
- Publisher
- Elsevier BV
- Published
- 2011-10
- Volume
- 43
- Issue
- 10
- Pages
- 2549-2563
- ISSN
- 0378-7788 (ISSN-L)
- OpenAlex
- W2065402459
- Cited by
- 1,196
- References
- 34
- FWCI
- 66.47
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.