The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Traditional, state-of-the-art and future thermal building insulation materials and solutions – Properties, requirements and possibilities
Open accessAbstract
The advantages and disadvantages of the thermal building insulation materials and solutions have been treated. Both traditional, state-of-the-art and possible materials and solutions beyond these have been investigated. Examples of these may be mineral wool, expanded polystyrene, extruded polystyrene, polyurethane, vacuum insulation panels, gas insulation panels, aerogels, and future possibilities like vacuum insulation materials, nano insulation materials and dynamic insulation materials. Various properties, requirements and possibilities have been compared and studied. Among these are thermal conductivity, perforation vulnerability, building site adaptability and cuttability, mechanical strength, fire protection, fume emission during fire, robustness, climate ageing durability, resistance towards freezing/thawing cycles, water resistance, costs and environmental impact. Currently, there exist no single insulation material or solution capable of fulfilling all the requirements with respect to the most crucial properties. That is, for the buildings of today and the near future, several insulation materials and solutions are used and will have to be used depending on the exact circumstances and specifications. As of today, new materials and solutions like e.g. vacuum insulation panels are emerging, but only slowly introduced in the building sector partly due to their short track record. Therefore it will be of major importance to know the limitations and possibilities of all the insulation materials and solutions, i.e. their advantages and disadvantages. In this respect new conceptual thermal building insulation materials are also discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review on phase change energy storage: materials and applications
Farid, M. M., Khudhair, A. M., Razack, S. A. K., & Al-Hallaj, S. (2004) · Energy Conversion and Management · doi:10.1016/j.enconman.2003.09.015 · Cited by 3,097
Khudhair, A. M., & Farid, M. M. (2004) · Energy Conversion and Management · doi:10.1016/s0196-8904(03)00131-6 · Cited by 1,394
Baetens, R., Jelle, B. P., & Gustavsen, A. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2009.08.021 · Cited by 1,322
Self-citationHasnain, S. M. (1998) · Energy Conversion and Management · doi:10.1016/s0196-8904(98)00025-9 · Cited by 1,267
Zhang, Z. M. (2020) · Mechanical Engineering Series · doi:10.1007/978-3-030-45039-7 · Cited by 1,121
Aerogel insulation for building applications: A state-of-the-art review
Baetens, R., Jelle, B. P., & Gustavsen, A. (2011) · Energy and Buildings · doi:10.1016/j.enbuild.2010.12.012 · Cited by 1,091
Self-citationAl-Homoud, D. M. S. (2005) · Building and Environment · doi:10.1016/j.buildenv.2004.05.013 · Cited by 1,019
Phase change materials for building applications: A state-of-the-art review
Baetens, R., Jelle, B. P., & Gustavsen, A. (2010) · Energy and Buildings · doi:10.1016/j.enbuild.2010.03.026 · Cited by 997
Self-citationJoulain, K., Mulet, J.-P., Marquier, F., Carminati, R., & Greffet, J.-J. (2005) · Surface Science Reports · doi:10.1016/j.surfrep.2004.12.002 · Cited by 950
State of the art in thermal insulation materials and aims for future developments
Papadopoulos, A. M. (2005) · Energy and Buildings · doi:10.1016/j.enbuild.2004.05.006 · Cited by 914
Cited by
Wicklein, B., Kocjan, A., Salazar-Alvarez, G., Carosio, F., Camino, G., Antonietti, M., & Bergström, L. (2015) · Nature Nanotechnology · doi:10.1038/nnano.2014.248 · Cited by 1,422
Insulation materials for the building sector: A review and comparative analysis
Schiavoni, S., D׳Alessandro, F., Bianchi, F., & Asdrubali, F. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.05.045 · Cited by 993
Polyurethane Foams: Past, Present, and Future
Gama, N. V., Ferreira, A., & Barros-Timmons, A. (2018) · Materials · doi:10.3390/ma11101841 · Cited by 902
A review on insulation materials for energy conservation in buildings
Aditya, L., Mahlia, T. M. I., Rismanchi, B., Ng, H. M., Hasan, M. H., Metselaar, H. S. C., Muraza, O., & Aditiya, H. B. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.02.034 · Cited by 811
Thermal conductivity of concrete – A review
Asadi, I., Shafigh, P., Abu Hassan, Z. F. B., & Mahyuddin, N. B. (2018) · Journal of Building Engineering · doi:10.1016/j.jobe.2018.07.002 · Cited by 803
Toward aerogel based thermal superinsulation in buildings: A comprehensive review
Cuce, E., Cuce, P. M., Wood, C. J., & Riffat, S. B. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.03.017 · Cited by 775
Traditional, state-of-the-art and renewable thermal building insulation materials: An overview
Abu-Jdayil, B., Mourad, A.-H., Hittini, W., Hassan, M., & Hameedi, S. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.04.102 · Cited by 638
Kalnæs, S. E., & Jelle, B. P. (2015) · Energy and Buildings · doi:10.1016/j.enbuild.2015.02.023 · Cited by 585
Self-citationFenestration of today and tomorrow: A state-of-the-art review and future research opportunities
Jelle, B. P., Hynd, A., Gustavsen, A., Arasteh, D., Goudey, H., & Hart, R. (2012) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2011.08.010 · Cited by 551
Self-citationHighly Compressible, Anisotropic Aerogel with Aligned Cellulose Nanofibers
Song, J., Chen, C., Yang, Z., Kuang, Y., Li, T., Li, Y., Huang, H., Kierzewski, I., Liu, B., He, S., et al. (2018) · ACS Nano · doi:10.1021/acsnano.7b04246 · Cited by 536
Li, T., Song, J., Zhao, X., Yang, Z., Pastel, G., Xu, S., Jia, C., Dai, J., Chen, C., Gong, A., et al. (2018) · Science Advances · doi:10.1126/sciadv.aar3724 · Cited by 531
Comparative analysis of building insulation material properties and performance
Kumar, D., Alam, M., Zou, P. X. W., Sanjayan, J. G., & Memon, R. A. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110038 · Cited by 501
Fire‐Retardant and Thermally Insulating Phenolic‐Silica Aerogels
Yu, Z., Yang, N., Apostolopoulou‐Kalkavoura, V., Qin, B., Ma, Z., Xing, W., Qiao, C., Bergström, L., Antonietti, M., & Yu, S. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201711717 · Cited by 448
A review on optimization methods applied in energy-efficient building geometry and envelope design
Kheiri, F. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.04.080 · Cited by 400
Thermally Insulating Nanocellulose‐Based Materials
Apostolopoulou‐Kalkavoura, V., Munier, P., & Bergström, L. (2021) · Advanced Materials · doi:10.1002/adma.202001839 · Cited by 394
Linhares, T., Pessoa de Amorim, M. T., & Durães, L. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta04811a · Cited by 366
Su, L., Wang, H., Niu, M., Dai, S., Cai, Z., Yang, B., Huyan, H., & Pan, X. (2020) · Science Advances · doi:10.1126/sciadv.aay6689 · Cited by 351
Villasmil, W., Fischer, L. J., & Worlitschek, J. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.12.040 · Cited by 329
Zhang, X., Wang, F., Dou, L., Cheng, X., Si, Y., Yu, J., & Ding, B. (2020) · ACS Nano · doi:10.1021/acsnano.0c06423 · Cited by 300
Muthuraj, R., Lacoste, C., Lacroix, P., & Bergeret, A. (2019) · Industrial Crops and Products · doi:10.1016/j.indcrop.2019.04.053 · Cited by 291
Recent Developments in Nanocellulose-Based Aerogels in Thermal Applications: A Review
Ahankari, S., Paliwal, P., Subhedar, A., & Kargarzadeh, H. (2021) · ACS Nano · doi:10.1021/acsnano.0c09678 · Cited by 281
Optimization of passive solar design strategies: A review
Stevanović, S. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.04.028 · Cited by 271
Comparative environmental life cycle assessment of thermal insulation materials of buildings
Pargana, N., Pinheiro, M. D., Silvestre, J. D., & de Brito, J. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2014.05.057 · Cited by 267
Gössling, S., Balas, M., Mayer, M., & Sun, Y.-Y. (2023) · Tourism Management · doi:10.1016/j.tourman.2022.104681 · Cited by 259
Zhu, B., Kou, H., Liu, Z., Wang, Z., Macharia, D. K., Zhu, M., Wu, B., Liu, X., & Chen, Z. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b12806 · Cited by 257
The development history and prospects of biomass-based insulation materials for buildings
Liu, L., Li, H., Lazzaretto, A., Manente, G., Tong, C., Liu, Q., & Li, N. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.11.140 · Cited by 256
Aerogel-incorporated concrete: An experimental study
Gao, T., Jelle, B. P., Gustavsen, A., & Jacobsen, S. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.10.100 · Cited by 256
Self-citationPohoryles, D. A., Maduta, C., Bournas, D. A., & Kouris, L. A. (2020) · Energy and Buildings · doi:10.1016/j.enbuild.2020.110024 · Cited by 185
Passive alternatives to mechanical air conditioning of building: A review
Samuel, D. G. L., Nagendra, S. M. S., & Maiya, M. P. (2013) · Building and Environment · doi:10.1016/j.buildenv.2013.04.016 · Cited by 184
Rabbat, C., Awad, S., Villot, A., Rollet, D., & Andrès, Y. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111962 · Cited by 183
Phase Change Materials for Application in Energy-Efficient Buildings
Jelle, B. P., & Kalnæs, S. E. (2017) · Cost-Effective Energy Efficient Building Retrofitting · doi:10.1016/b978-0-08-101128-7.00003-4 · Cited by 90
Self-citationCorrelation Between Ultrasonic Pulse Velocity and Thermal Conductivity of Cement-Based Composites
Mendes, J. C., Barreto, R. R., Costa, L. C. B., Brigolini, G. J., & Peixoto, R. A. F. (2020) · Journal of Nondestructive Evaluation · doi:10.1007/s10921-020-00680-7 · Cited by 20
Karami, P., Afriyie, E. T., Norberg, P., & Gudmundsson, K. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2014.09.038 · Cited by 19
Metadata
- Authors
- Jelle, B. P.
- Venue
- Energy and Buildings
- Publisher
- Elsevier BV
- Published
- 2011-10
- Volume
- 43
- Issue
- 10
- Pages
- 2549-2563
- ISSN
- 0378-7788 (ISSN-L)
- OpenAlex
- W2065402459
- Cited by
- 1,196
- References
- 34
- FWCI
- 66.47
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.