Design of a low-temperature solar heating system based on a slurry Phase Change Material (PCS)
Open accessThe DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
Abstract Flat-plate solar thermal collectors are the most common devices used for the conversion of solar energy into heat. Water-based fluids are frequently adopted as heat carriers for this technology, although their efficiency is limited by certain thermodynamic and heat storage constraints. Latent heat, which can be obtained from microencapsulated Phase Change Slurry (mPCS) – that is a mixtures of microencapsulated Phase Change Materials (mPCM), water and surfactants – is an innovative approach that can be used to overcome some of the aforementioned limitations. The viscosity of these fluids is similar to that of water, and, as a result, they can be pumped easily. Some of the thermo-physical and rheological properties and the material behaviour of flat-plate solar thermal collectors with an mPCS as the heat carrier fluid are analysed in the present work. Solar thermal systems filled with an mPCS are proposed and a prototypal system is presented. The possible advantages and drawbacks of this technology are also discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Heat and cold storage with PCM: An up to date introduction into basics and applications
Mehling, H., & Cabeza, L. F. (2008) · Heat and Mass Transfer · doi:10.1007/978-3-540-68557-9 · Cited by 894
Review of thermal energy storage technologies based on PCM application in buildings
Pomianowski, M., Heiselberg, P., & Zhang, Y. (2013) · Energy and Buildings · doi:10.1016/j.enbuild.2013.08.006 · Cited by 474
Fabrizio, E. (2012) · Energy and Buildings · doi:10.1016/j.enbuild.2012.07.003 · Cited by 126 · cited 1×
“The time delay between the availability of energy and its consumption is one of the most important pr oblems in renewable energy applications [8].”
BackgroundSelf-citation
Cited by
Dutkowski, K., & Kruzel, M. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.118741 · Cited by 32
The experimental investigation of mPCM slurries density at phase change temperature
Dutkowski, K., Kruzel, M., Zajączkowski, B., & Białko, B. (2020) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2020.120083 · Cited by 26
Dutkowski, K., Kruzel, M., & Zajączkowski, B. (2020) · Energies · doi:10.3390/en14010179 · Cited by 21
Metadata
- Authors
- Serale, G., Fabrizio, E., & Perino, M.
- Venue
- Energy and Buildings
- Publisher
- Elsevier BV
- Published
- 2015-11
- Volume
- 106
- Pages
- 44-58
- ISSN
- 0378-7788 (ISSN-L)
- OpenAlex
- W1839110021
- Cited by
- 47
- References
- 3
- FWCI
- 5.56
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.